[Sun Jun 24 09:39:20 2012] Detection parameters:
  Position = (281.2, 354.0) = 7 34 41.17 31 57 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.7 +/- 20.9
  Background counts = 43.2
  Rate = 0.006 +/- 0.0006

[Sun Jun 24 09:39:21 2012] Off-axis axis estimate = 4.22'
[Sun Jun 24 09:43:23 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 09:43:23 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Sun Jun 24 09:43:23 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.030
[Sun Jun 24 09:43:23 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 8.54"
[Sun Jun 24 14:56:29 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src59.ximg exists
[Sun Jun 24 14:56:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src59.csv
[Sun Jun 24 14:56:29 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src59_1.ximg exists
[Sun Jun 24 14:56:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src59.csv
[Sun Jun 24 14:56:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:56:31 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sun Jun 24 14:56:31 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sun Jun 24 14:56:31 2012] Fit fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sun Jun 24 17:42:32 2012] Warning, spatial fit 59 centroid is now closest to src. 19
[Sun Jun 24 17:42:32 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 17:42:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 17:42:32 2012] Assessing source extent using major
[Sun Jun 24 17:42:32 2012] Source does appear to be extended
[Sun Jun 24 17:42:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:42:32 2012] Source is confused with source 83
[Sun Jun 24 17:42:59 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 17:42:59 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Sun Jun 24 17:42:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.030
[Sun Jun 24 17:42:59 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 8.54"
[Sun Jun 24 21:17:42 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass1_src51.ximg exists
[Sun Jun 24 21:17:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880801_pi300-10000_cl_pass1_src51.csv
[Sun Jun 24 21:17:42 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun Jun 24 21:17:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880801_pi300-10000_cl_pass1_src51.csv
[Sun Jun 24 21:17:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880801_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880801_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 21:17:43 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun Jun 24 21:17:43 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun Jun 24 21:17:43 2012] Fit fullrun_pn_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sun Jun 24 22:16:08 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 10.394109 pixels away
[Sun Jun 24 22:16:08 2012] Spatial fit model total counts = 1741.710000, observed total counts = 1738.000000
[Sun Jun 24 22:16:08 2012] Offset between fit and detection position for source 60 = 0.632156 pixels
[Sun Jun 24 22:16:08 2012] 1200.769000 total counts/ 1060.430000 bgd. counts: snr = 4.309604
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.632156 pixels
  Position = (281.8, 354.2) = 7 34 40.97 31 57 53.4
  Extent = 8.9 (5.7-13.4)", rotation angle = 0
  Source counts = 140.3 +/- 34.7
  Background counts = 1060.4
  Rate = 0.003 +/- 0.0007
[Sun Jun 24 22:16:08 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 22:16:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 22:16:08 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 22:16:08 2012] Source does appear to be extended
[Sun Jun 24 22:16:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 22:16:27 2012] XMMSAS src. selection expression = ellipse(24469.891400, 30771.042000, 536.118615, 536.118615, 0.000000, X, Y)
[Sun Jun 24 22:16:27 2012] Writing source region out to fullrun_pn_xmm0112880801_pi300-10000_pass1_cl_src60_src.reg
[Sun Jun 24 22:16:27 2012] Extracting stamp from image fullrun_pn_xmm0112880801_pi300-10000_cl_sm2.00.img.gz, (251, 323) - (313, 385)
[Sun Jun 24 22:16:27 2012] XMMSAS bgd. selection expression = annulus(24469.891400, 30771.042000, 893.531026, 1787.062051, X, Y) && !ellipse(23095.499448, 33039.807600, 1536.656044, 461.766413, 75.585000, X, Y) && !ellipse(23325.142000, 31878.018000, 666.455219, 666.455219, 0.000000, X, Y) && !ellipse(27008.306183, 32106.336792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23550.690200, 31160.479000, 798.384823, 798.384823, 0.000000, X, Y) && !ellipse(23693.985960, 30591.664200, 1447.672042, 515.183215, 90.000000, X, Y) && !ellipse(23798.820390, 30166.668288, 1728.584050, 409.641457, 75.092651, X, Y) && !ellipse(23977.110500, 29479.256600, 1728.584050, 422.660812, 74.653400, X, Y) && !ellipse(24102.341800, 28960.670000, 1824.832053, 409.103212, 78.483000, X, Y) && !ellipse(24433.250000, 27581.386800, 1455.152042, 429.436012, 90.000000, X, Y) && !ellipse(24035.265442, 31962.051880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24614.486633, 29534.632935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.386841, 28656.646606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24440.768066, 30311.789215, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 22:16:27 2012] Writing fullrun_pn_xmm0112880801_pi300-10000_pass1_cl_src60.gif
[Sun Jun 24 23:46:12 2012] Mean detx,y = (-798.34, 6534.94) 
[Sun Jun 24 23:46:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 23:46:39 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 23:46:40 2012] Setting source spectrum file to fullrun_pn_xmm0112880801_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sun Jun 24 23:46:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112880801_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon Jun 25 03:46:37 2012] Updating aperture counts using extracted products
[Mon Jun 25 03:46:37 2012] Error reading totcts from fullrun_pn_xmm0112880801_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Jun 25 03:46:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 03:46:38 2012] Using photon index=1.80, rate=0.00281, arf fullrun_pn_xmm0112880801_pi300-10000_pass1_cl_src60.arf
[Mon Jun 25 03:46:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 03:46:38 2012] Updating source flux to 1.3e-14
[Mon Jun 25 03:49:30 2012] Flag c found in src. 60 procflags, skipping spectral fitting