[Sun Jun 24 09:39:21 2012] Detection parameters:
  Position = (314.3, 135.3) = 7 34 29.87 31 42 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.0 +/- 11.8
  Background counts = 33.1
  Rate = 0.001 +/- 0.0002

[Sun Jun 24 09:39:21 2012] Off-axis axis estimate = 11.88'
[Sun Jun 24 09:43:23 2012] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 09:43:23 2012] Initial guess for spatial extent in simple fitting = 12.37"
[Sun Jun 24 09:43:23 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.096
[Sun Jun 24 09:43:23 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 12.37"
[Sun Jun 24 14:56:30 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src100.ximg exists
[Sun Jun 24 14:56:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src100.csv
[Sun Jun 24 14:56:30 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src100_1.ximg exists
[Sun Jun 24 14:56:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src100.csv
[Sun Jun 24 14:56:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:56:32 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Sun Jun 24 14:56:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src100.csv
[Sun Jun 24 14:56:32 2012] fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Sun Jun 24 14:56:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src100.csv
[Sun Jun 24 14:56:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 17:42:32 2012] Warning: source 100 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 102 at 15.665230 pixels away
[Sun Jun 24 17:42:32 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 17:42:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 17:42:32 2012] Assessing source extent using major
[Sun Jun 24 17:42:32 2012] Source does appear to be extended
[Sun Jun 24 17:42:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:42:32 2012] Deleting source due to low Poisson probability 0.8