[Sun Jun 24 09:40:11 2012] Detection parameters:
  Position = (406.7, 316.0) = 7 33 58.29 31 55 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.9 +/- 18.2
  Background counts = 11.4
  Rate = 0.004 +/- 0.0003

[Sun Jun 24 09:40:12 2012] Off-axis axis estimate = 7.95'
[Sun Jun 24 15:59:24 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 15:59:24 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Sun Jun 24 15:59:24 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.076
[Sun Jun 24 15:59:24 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.41"
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun 24 17:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src10.csv
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun 24 17:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src10.csv
[Sun Jun 24 17:42:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun 24 17:42:10 2012] Fit fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Jun 24 17:42:47 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.719085 pixels away
[Sun Jun 24 17:42:47 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 17:42:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 17:42:47 2012] Assessing source extent using major
[Sun Jun 24 17:42:47 2012] Source does appear to be extended
[Sun Jun 24 17:42:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 21:39:05 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 21:39:05 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Sun Jun 24 21:39:05 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.076
[Sun Jun 24 21:39:05 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.41"
[Sun Jun 24 22:15:52 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jun 24 22:15:52 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jun 24 22:15:52 2012] Fit fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun Jun 24 22:15:53 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jun 24 22:15:53 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jun 24 22:15:53 2012] Fit fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Jun 24 22:16:15 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.719085 pixels away
[Sun Jun 24 22:16:15 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 22:16:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 22:16:15 2012] Assessing source extent using major
[Sun Jun 24 22:16:15 2012] Source does appear to be extended
[Sun Jun 24 22:16:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 02:50:30 2012] XMMSAS src. selection expression = ellipse(35336.580841, 27447.599365, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 25 02:50:30 2012] Writing source region out to fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src8_src.reg
[Mon Jun 25 02:50:30 2012] Extracting stamp from image fullrun_mos2_xmm0112880801_pi300-10000_cl_sm2.00.img.gz, (369, 279) - (444, 354)
[Mon Jun 25 02:50:30 2012] XMMSAS bgd. selection expression = annulus(35336.580841, 27447.599365, 1087.500000, 2175.000000, X, Y)
[Mon Jun 25 02:50:30 2012] Writing fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src8.gif
[Mon Jun 25 03:01:23 2012] Mean detx,y = (10694.71, -914.84) 
[Mon Jun 25 03:01:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 03:01:33 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 03:01:33 2012] Setting source spectrum file to fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun 25 03:01:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Jun 25 03:28:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 25 03:28:10 2012] rmf not generated due to insufficient counts
[Mon Jun 25 03:46:39 2012] Updating aperture counts using extracted products
[Mon Jun 25 03:46:39 2012] Error reading totcts from fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun 25 03:46:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 03:46:39 2012] Using photon index=1.80, rate=0.00424, arf fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src8.arf
[Mon Jun 25 03:46:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 03:46:39 2012] Updating source flux to 1e-13
[Mon Jun 25 03:47:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting