[Sun Jun 24 09:40:11 2012] Detection parameters:
  Position = (280.4, 274.7) = 7 34 41.44 31 52 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.0 +/- 26.7
  Background counts = 19.5
  Rate = 0.005 +/- 0.0006

[Sun Jun 24 09:40:12 2012] Off-axis axis estimate = 2.16'
[Sun Jun 24 15:59:24 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 15:59:24 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Sun Jun 24 15:59:24 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.858
[Sun Jun 24 15:59:24 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.51"
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jun 24 17:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src8.csv
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jun 24 17:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src8.csv
[Sun Jun 24 17:42:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jun 24 17:42:10 2012] Fit fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Jun 24 17:42:47 2012] Source 17 is offset by -6.468953 and -1.925486 pixels which is larger than
2 X fitted extent = 2.592133 x 6.903127, not incorporating fit results
[Sun Jun 24 17:42:47 2012] Source 17 is offset by -8.092930 and -0.238385 pixels which is larger than
2 X fitted extent = 3.209182 x 9.007265, not incorporating fit results
[Sun Jun 24 17:42:47 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 17:42:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 17:42:47 2012] Assessing source extent using major
[Sun Jun 24 17:42:47 2012] Source does appear to be extended
[Sun Jun 24 17:42:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:42:47 2012] Source is confused with source 16
[Sun Jun 24 21:39:05 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 21:39:05 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Sun Jun 24 21:39:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.858
[Sun Jun 24 21:39:05 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.51"
[Sun Jun 24 22:15:52 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jun 24 22:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src8.csv
[Sun Jun 24 22:15:52 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jun 24 22:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src8.csv
[Sun Jun 24 22:15:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 22:15:53 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jun 24 22:15:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jun 24 22:15:53 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jun 24 22:15:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jun 24 22:15:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 22:16:15 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.462309 pixels away
[Sun Jun 24 22:16:15 2012] Warning, spatial fit 8 centroid is now closest to src. 16
[Sun Jun 24 22:16:15 2012] Source 17 is offset by -5.348585 and -2.763695 pixels which is larger than
2 X fitted extent = 3.445150 x 3.445150, not incorporating fit results
[Sun Jun 24 22:16:15 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 22:16:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 22:16:15 2012] Assessing source extent using major
[Sun Jun 24 22:16:15 2012] Source does appear to be extended
[Sun Jun 24 22:16:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 02:50:30 2012] XMMSAS src. selection expression = ellipse(24349.273102, 23854.476532, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 25 02:50:30 2012] Writing source region out to fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src17_src.reg
[Mon Jun 25 02:50:30 2012] Extracting stamp from image fullrun_mos2_xmm0112880801_pi300-10000_cl_sm2.00.img.gz, (243, 237) - (318, 312)
[Mon Jun 25 02:50:30 2012] XMMSAS bgd. selection expression = annulus(24349.273102, 23854.476532, 1087.500000, 2175.000000, X, Y) && !ellipse(25365.981740, 23920.133200, 1430.791241, 1430.791241, 0.000000, X, Y) && !ellipse(25737.559800, 25285.211200, 1412.978441, 1228.293635, 11.772121, X, Y) && !ellipse(24331.526886, 22919.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24219.967865, 24399.500946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22036.422653, 20813.212158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22544.836000, 26401.276000, 1214.112035, 1214.112035, 0.000000, X, Y)
[Mon Jun 25 02:50:30 2012] Writing fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src17.gif
[Mon Jun 25 03:00:57 2012] Mean detx,y = (-556.44, 21.61) 
[Mon Jun 25 03:00:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 03:01:07 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 03:01:07 2012] Setting source spectrum file to fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun 25 03:01:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jun 25 03:27:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 25 03:27:52 2012] rmf not generated due to insufficient counts
[Mon Jun 25 03:46:39 2012] Updating aperture counts using extracted products
[Mon Jun 25 03:46:39 2012] Error reading totcts from fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun 25 03:46:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 03:46:39 2012] Using photon index=1.80, rate=0.00461, arf fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src17.arf
[Mon Jun 25 03:46:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 03:46:39 2012] Updating source flux to 5.9e-14
[Mon Jun 25 03:47:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting