[Sun Jun 24 09:40:11 2012] Detection parameters:
  Position = (278.9, 281.0) = 7 34 41.94 31 52 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.1 +/- 24.0
  Background counts = 20.2
  Rate = 0.004 +/- 0.0005

[Sun Jun 24 09:40:12 2012] Off-axis axis estimate = 1.90'
[Sun Jun 24 15:59:24 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 15:59:24 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Sun Jun 24 15:59:24 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.778
[Sun Jun 24 15:59:24 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.38"
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 24 17:42:10 2012] Fit fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_src9 appears to have run properly
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 24 17:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 24 17:42:10 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 24 17:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 24 17:42:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 17:42:47 2012] Warning, spatial fit 9 centroid is now closest to src. 17
[Sun Jun 24 17:42:47 2012] Source 16 is offset by 6.332481 and -2.216978 pixels which is larger than
2 X fitted extent = 2.275733 x 2.275733, not incorporating fit results
[Sun Jun 24 17:42:47 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 17:42:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 17:42:47 2012] Assessing source extent using major
[Sun Jun 24 17:42:47 2012] Source does appear to be extended
[Sun Jun 24 17:42:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:42:47 2012] Source is confused with source 17
[Sun Jun 24 21:39:05 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 21:39:05 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Sun Jun 24 21:39:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.778
[Sun Jun 24 21:39:05 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.38"
[Sun Jun 24 22:15:52 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jun 24 22:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src9.csv
[Sun Jun 24 22:15:52 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jun 24 22:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src9.csv
[Sun Jun 24 22:15:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 22:15:53 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jun 24 22:15:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jun 24 22:15:53 2012] fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jun 24 22:15:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jun 24 22:15:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 22:16:15 2012] Source 16 is offset by -7.892622 and -0.891621 pixels which is larger than
2 X fitted extent = 0.862892 x 0.862892, not incorporating fit results
[Sun Jun 24 22:16:15 2012] Warning, spatial fit 9 centroid is now closest to src. 17
[Sun Jun 24 22:16:15 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 22:16:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 22:16:15 2012] Assessing source extent using major
[Sun Jun 24 22:16:15 2012] Source does appear to be extended
[Sun Jun 24 22:16:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 02:50:30 2012] XMMSAS src. selection expression = ellipse(24219.967865, 24399.500946, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 25 02:50:30 2012] Writing source region out to fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src16_src.reg
[Mon Jun 25 02:50:30 2012] Extracting stamp from image fullrun_mos2_xmm0112880801_pi300-10000_cl_sm2.00.img.gz, (241, 244) - (316, 319)
[Mon Jun 25 02:50:30 2012] XMMSAS bgd. selection expression = annulus(24219.967865, 24399.500946, 1087.500000, 2175.000000, X, Y) && !ellipse(25365.981740, 23920.133200, 1430.791241, 1430.791241, 0.000000, X, Y) && !ellipse(25737.559800, 25285.211200, 1412.978441, 1228.293635, 11.772121, X, Y) && !ellipse(24331.526886, 22919.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24349.273102, 23854.476532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22544.836000, 26401.276000, 1214.112035, 1214.112035, 0.000000, X, Y)
[Mon Jun 25 02:50:30 2012] Writing fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src16.gif
[Mon Jun 25 03:01:12 2012] Mean detx,y = (-644.27, -435.14) 
[Mon Jun 25 03:01:13 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 03:01:19 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 03:01:19 2012] Setting source spectrum file to fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Jun 25 03:01:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Jun 25 03:28:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 25 03:28:06 2012] rmf not generated due to insufficient counts
[Mon Jun 25 03:46:39 2012] Updating aperture counts using extracted products
[Mon Jun 25 03:46:39 2012] Error reading totcts from fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Jun 25 03:46:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 03:46:39 2012] Using photon index=1.80, rate=0.00434, arf fullrun_mos2_xmm0112880801_pi300-10000_pass1_cl_src16.arf
[Mon Jun 25 03:46:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 03:46:39 2012] Updating source flux to 5.8e-14
[Mon Jun 25 03:47:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting