[Sun Jun 24 09:39:47 2012] Detection parameters:
  Position = (448.3, 209.8) = 7 33 44.16 31 47 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 526.6 +/- 27.5
  Background counts = 10.1
  Rate = 0.01 +/- 0.0005

[Sun Jun 24 09:39:47 2012] Off-axis axis estimate = 12.62'
[Sun Jun 24 14:56:32 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 14:56:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 14:56:32 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Sun Jun 24 14:56:32 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.042
[Sun Jun 24 14:56:32 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.74"
[Sun Jun 24 15:59:23 2012] fullrun_mos1_xmm0112880801_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 24 15:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880801_pi300-10000_cl_pass0_src5.csv
[Sun Jun 24 15:59:23 2012] fullrun_mos1_xmm0112880801_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 24 15:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880801_pi300-10000_cl_pass0_src5.csv
[Sun Jun 24 15:59:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 15:59:23 2012] fullrun_mos1_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 24 15:59:23 2012] fullrun_mos1_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 24 15:59:23 2012] Fit fullrun_mos1_xmm0112880801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun 24 17:42:40 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.522385 pixels away
[Sun Jun 24 17:42:40 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 17:42:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 17:42:40 2012] Assessing source extent using major
[Sun Jun 24 17:42:40 2012] Source does appear to be extended
[Sun Jun 24 17:42:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 21:17:44 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 21:17:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 21:17:44 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Sun Jun 24 21:17:44 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.042
[Sun Jun 24 21:17:44 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.74"
[Sun Jun 24 21:39:04 2012] fullrun_mos1_xmm0112880801_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 24 21:39:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880801_pi300-10000_cl_pass1_src5.csv
[Sun Jun 24 21:39:04 2012] fullrun_mos1_xmm0112880801_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 24 21:39:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880801_pi300-10000_cl_pass1_src5.csv
[Sun Jun 24 21:39:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 21:39:04 2012] fullrun_mos1_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 24 21:39:04 2012] fullrun_mos1_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 24 21:39:04 2012] Fit fullrun_mos1_xmm0112880801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun 24 22:16:11 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.522385 pixels away
[Sun Jun 24 22:16:11 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 22:16:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 22:16:11 2012] Assessing source extent using major
[Sun Jun 24 22:16:11 2012] Source does appear to be extended
[Sun Jun 24 22:16:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 02:11:47 2012] XMMSAS src. selection expression = ellipse(38952.690918, 18202.370514, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 25 02:11:47 2012] Writing source region out to fullrun_mos1_xmm0112880801_pi300-10000_pass1_cl_src4_src.reg
[Mon Jun 25 02:11:47 2012] Extracting stamp from image fullrun_mos1_xmm0112880801_pi300-10000_cl_sm2.00.img.gz, (411, 172) - (486, 247)
[Mon Jun 25 02:11:47 2012] XMMSAS bgd. selection expression = annulus(38952.690918, 18202.370514, 1087.500000, 2175.000000, X, Y)
[Mon Jun 25 02:11:47 2012] Writing fullrun_mos1_xmm0112880801_pi300-10000_pass1_cl_src4.gif
[Mon Jun 25 02:21:48 2012] Mean detx,y = (9191.72, -12151.69) 
[Mon Jun 25 02:21:49 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 02:22:02 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 02:22:02 2012] Setting source spectrum file to fullrun_mos1_xmm0112880801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jun 25 02:22:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112880801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jun 25 02:37:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 25 02:37:23 2012] rmf not generated due to insufficient counts
[Mon Jun 25 03:46:38 2012] Updating aperture counts using extracted products
[Mon Jun 25 03:46:38 2012] Error reading totcts from fullrun_mos1_xmm0112880801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jun 25 03:46:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 03:46:39 2012] Using photon index=1.80, rate=0.0101, arf fullrun_mos1_xmm0112880801_pi300-10000_pass1_cl_src4.arf
[Mon Jun 25 03:46:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 03:46:39 2012] Updating source flux to 3.4e-13
[Mon Jun 25 03:46:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting