[Thu Jun 20 07:18:04 2013] Detection parameters:
  Position = (371.8, 277.7) = 3 7 48.92 40 54 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.4 +/- 20.3
  Background counts = 80.4
  Rate = 0.005 +/- 0.0005

[Thu Jun 20 07:18:07 2013] Off-axis axis estimate = 5.53'
[Thu Jun 20 07:19:16 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:16 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Thu Jun 20 07:19:16 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.915
[Thu Jun 20 07:19:16 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 9.19"
[Thu Jun 20 07:19:18 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src61.ximg exists
[Thu Jun 20 07:19:18 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src61.csv
[Thu Jun 20 07:19:18 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu Jun 20 07:19:18 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src61.csv
[Thu Jun 20 07:19:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:21 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu Jun 20 07:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Jun 20 07:19:21 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu Jun 20 07:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Jun 20 07:19:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:56 2013] Source 61 is offset by -8.372217 and 2.350226 pixels which is larger than
2 X fitted extent = 1.056768 x 1.056768, not incorporating fit results
[Thu Jun 20 07:19:56 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:19:56 2013] Assessing source extent using major
[Thu Jun 20 07:19:56 2013] Source does appear to be extended
[Thu Jun 20 07:19:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:50 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:50 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Thu Jun 20 07:20:50 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.915
[Thu Jun 20 07:20:50 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 9.19"
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src46.ximg exists
[Thu Jun 20 07:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src46.csv
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src46_1.ximg exists
[Thu Jun 20 07:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src46.csv
[Thu Jun 20 07:20:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:53 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Thu Jun 20 07:20:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src46.csv
[Thu Jun 20 07:20:53 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Thu Jun 20 07:20:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src46.csv
[Thu Jun 20 07:20:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:21:19 2013] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 20.175913 pixels away
[Thu Jun 20 07:21:19 2013] Spatial fit model total counts = 968.448000, observed total counts = 795.000000
[Thu Jun 20 07:21:19 2013] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 07:21:19 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:19 2013] Assessing source extent using major
[Thu Jun 20 07:21:19 2013] Source does appear to be extended
[Thu Jun 20 07:21:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:22:03 2013] XMMSAS src. selection expression = ellipse(32302.323090, 24111.419647, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 07:22:03 2013] Not overwriting source region fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_src.reg
[Thu Jun 20 07:22:03 2013] Extracting stamp from image fullrun_pn_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (334, 240) - (409, 315)
[Thu Jun 20 07:22:03 2013] XMMSAS bgd. selection expression = annulus(32302.323090, 24111.419647, 1087.500000, 2175.000000, X, Y) && !ellipse(27140.070000, 25967.904000, 5177.016149, 5177.016149, 0.000000, X, Y) && !ellipse(29708.494000, 24805.444000, 1268.064036, 1268.064036, 0.000000, X, Y) && !ellipse(33266.650970, 21417.283096, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 07:22:03 2013] Writing fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61.gif
[Thu Jun 20 07:22:27 2013] ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_src.evt and ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_bgd.evt exist, delete to re-create
[Thu Jun 20 07:22:27 2013] Mean detx,y = (5567.60, 1654.63) 
[Thu Jun 20 07:22:27 2013] ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_src.img and ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_bgd.img exist, delete to re-create
[Thu Jun 20 07:22:27 2013] ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_bgd.pi exist, delete to re-create
[Thu Jun 20 07:22:27 2013] Setting source spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Thu Jun 20 07:22:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Thu Jun 20 07:22:27 2013] ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_bgd.lc exist, delete to re-create
[Thu Jun 20 09:52:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 09:52:01 2013] rmf not generated due to insufficient counts
[Thu Jun 20 09:52:01 2013] fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61.arf exists, delete to re-create
[Thu Jun 20 10:51:46 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:51:46 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 634.00
[Thu Jun 20 10:51:46 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_bgd.pi.gz = 2067.00
[Thu Jun 20 10:51:46 2013] Got source and background scale factors 1255796.000000, 6216861.000000
[Thu Jun 20 10:51:46 2013] User source parameters:
  Position = (371.8, 277.7) = 3 7 48.92 40 54 34.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 216.5 +/- 26.2
  Background aperture counts = 417.5
  Rate = 0.004 +/- 0.0005

[Thu Jun 20 10:51:46 2013] Updating counts from extracted products
[Thu Jun 20 10:51:46 2013] Set source signif. to 216.47/20.43 = 10.59
[Thu Jun 20 10:51:54 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:51:54 2013] Using photon index=1.80, rate=0.00435, arf fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61.arf
[Thu Jun 20 10:51:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:51:55 2013] Updating source flux to 2.1e-14
[Thu Jun 20 10:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 10:53:21 2013] xmm0112880701/analysis//spectral/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete