[Thu Jun 20 07:17:57 2013] Detection parameters:
  Position = (276.5, 157.0) = 3 8 25.49 40 45 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4616.0 +/- 82.8
  Background counts = 49.6
  Rate = 0.09 +/- 0.002

[Thu Jun 20 07:18:07 2013] Off-axis axis estimate = 10.38'
[Thu Jun 20 07:19:16 2013] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 07:19:16 2013] Initial guess for spatial extent in simple fitting = 11.62"
[Thu Jun 20 07:19:16 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.044
[Thu Jun 20 07:19:16 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.62"
[Thu Jun 20 07:19:17 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun 20 07:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src6.csv
[Thu Jun 20 07:19:17 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun 20 07:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src6.csv
[Thu Jun 20 07:19:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:19 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun 20 07:19:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 20 07:19:19 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun 20 07:19:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 20 07:19:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:55 2013] Warning, spatial fit 6 centroid is now closest to src. 12
[Thu Jun 20 07:19:55 2013] Spatial fit model total counts = 9647.860000, observed total counts = 9655.000000
[Thu Jun 20 07:19:55 2013] Offset between fit and detection position for source 6 = 1.832989 pixels
[Thu Jun 20 07:19:55 2013] Warning, changing simple spatial fit ID from 6 to 13
[Thu Jun 20 07:19:55 2013] 6977.650000 total counts/ 2313.120000 bgd. counts: snr = 96.985947
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.832989 pixels
  Position = (277.0, 158.7) = 3 8 25.29 40 45 59.0
  Extent = 11.5 (11.1-11.7)", rotation angle = 0
  Source counts = 4664.5 +/- 83.5
  Background counts = 2313.1
  Rate = 0.09 +/- 0.002
[Thu Jun 20 07:19:56 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:19:56 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:19:56 2013] Source does appear to be extended
[Thu Jun 20 07:19:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:19:56 2013] Source is confused with source 12
[Thu Jun 20 07:19:56 2013] Source is confused with source 13
[Thu Jun 20 07:20:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:50 2013] Initial guess for spatial extent in simple fitting = 11.47"
[Thu Jun 20 07:20:50 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Thu Jun 20 07:20:50 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 11.47"
[Thu Jun 20 07:20:51 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jun 20 07:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src6.csv
[Thu Jun 20 07:20:51 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jun 20 07:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src6.csv
[Thu Jun 20 07:20:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jun 20 07:20:52 2013] Fit fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Jun 20 07:21:19 2013] Warning, spatial fit 6 centroid is now closest to src. 13
[Thu Jun 20 07:21:19 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:19 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:21:19 2013] Source does appear to be extended
[Thu Jun 20 07:21:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:22:00 2013] Counts = 4664.530000, rescaling region sizes by 2.000000
[Thu Jun 20 07:22:00 2013] XMMSAS src. selection expression = ellipse(24053.076200, 13762.188000, 1376.088040, 1376.088040, 0.000000, X, Y)
[Thu Jun 20 07:22:00 2013] Not overwriting source region fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_src.reg
[Thu Jun 20 07:22:00 2013] Extracting stamp from image fullrun_pn_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (198, 80) - (356, 238)
[Thu Jun 20 07:22:00 2013] XMMSAS bgd. selection expression = annulus(24053.076200, 13762.188000, 4586.960132, 9173.920264, X, Y) && !ellipse(26286.897200, 22773.634000, 1219.320035, 1219.320035, 0.000000, X, Y) && !ellipse(26136.643532, 22043.523360, 1292.488037, 422.756812, 105.776400, X, Y) && !ellipse(26002.597600, 21508.544000, 989.568028, 989.568028, 0.000000, X, Y) && !ellipse(25615.335563, 19946.302636, 2200.768063, 477.622997, 104.655548, X, Y) && !ellipse(25510.442200, 19469.208000, 1055.648030, 1055.648030, 0.000000, X, Y) && !ellipse(25235.897083, 18398.104710, 1591.136046, 430.441902, 285.476670, X, Y) && !ellipse(25018.448860, 17564.832200, 1591.136046, 447.460013, 284.976000, X, Y) && !ellipse(24488.033600, 15484.476000, 1006.712029, 1006.712029, 0.000000, X, Y) && !ellipse(24405.947518, 15099.782253, 1799.048052, 454.816405, 105.968896, X, Y) && !ellipse(24257.486000, 14529.228800, 1799.048052, 463.509613, 105.980700, X, Y) && !ellipse(24147.334600, 14131.882000, 1054.464030, 1054.464030, 0.000000, X, Y) && !ellipse(26399.170200, 23065.094000, 929.664027, 929.664027, 0.000000, X, Y) && !ellipse(27140.070000, 25967.904000, 5177.016149, 5177.016149, 0.000000, X, Y) && !ellipse(25345.108215, 23638.712921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33266.650970, 21417.283096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17095.950775, 21176.126785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19915.191200, 20644.832800, 410.145612, 410.145612, 0.000000, X, Y) && !ellipse(28530.689362, 20178.361465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30233.505676, 19887.971619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20730.468600, 18566.763800, 448.130413, 448.130413, 0.000000, X, Y) && !ellipse(29144.471069, 18304.855972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25955.472900, 18214.993851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33607.593903, 18034.654968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33576.997345, 16220.036697, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 07:22:00 2013] Writing fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6.gif
[Thu Jun 20 07:22:06 2013] ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu Jun 20 07:22:06 2013] Mean detx,y = (103.10, 13383.07) 
[Thu Jun 20 07:22:06 2013] ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_src.img and ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu Jun 20 07:22:06 2013] ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu Jun 20 07:22:06 2013] Setting source spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jun 20 07:22:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jun 20 07:22:06 2013] ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu Jun 20 07:22:50 2013] fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6.rmf exists, delete to re-create
[Thu Jun 20 07:22:50 2013] fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Thu Jun 20 10:51:27 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:51:27 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 14335.00
[Thu Jun 20 10:51:27 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_bgd.pi.gz = 17676.00
[Thu Jun 20 10:51:27 2013] Got source and background scale factors 4022977.000000, 65247155.000000
[Thu Jun 20 10:51:27 2013] User source parameters:
  Position = (277.0, 158.7) = 3 8 25.29 40 45 59.0
  Extent = 11.5 (11.1-11.7)", rotation angle = 0
  Source aperture counts = 13245.1 +/- 120.7
  Background aperture counts = 1089.9
  Rate = 0.3 +/- 0.002

[Thu Jun 20 10:51:52 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:51:52 2013] Using photon index=1.80, rate=0.0936, arf fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6.arf
[Thu Jun 20 10:51:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:51:52 2013] Updating source flux to 7.7e-13
[Thu Jun 20 10:52:46 2013] Flag c found in src. 6 procflags, skipping spectral fitting
[Thu Jun 20 10:53:21 2013] xmm0112880701/analysis//spectral/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete