[Thu Jun 20 07:18:02 2013] Detection parameters:
  Position = (327.1, 362.2) = 3 8 6.06 41 0 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.3 +/- 21.2
  Background counts = 87.3
  Rate = 0.005 +/- 0.0006

[Thu Jun 20 07:18:07 2013] Off-axis axis estimate = 5.07'
[Thu Jun 20 07:19:16 2013] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:16 2013] Initial guess for spatial extent in simple fitting = 8.96"
[Thu Jun 20 07:19:16 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.953
[Thu Jun 20 07:19:16 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 8.96"
[Thu Jun 20 07:19:18 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src38.ximg exists
[Thu Jun 20 07:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src38.csv
[Thu Jun 20 07:19:18 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src38_1.ximg exists
[Thu Jun 20 07:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src38.csv
[Thu Jun 20 07:19:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:21 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Thu Jun 20 07:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src38.csv
[Thu Jun 20 07:19:21 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Thu Jun 20 07:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src38.csv
[Thu Jun 20 07:19:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:55 2013] Spatial fit model total counts = 1291.830000, observed total counts = 1104.000000
[Thu Jun 20 07:19:55 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 07:19:56 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:19:56 2013] Assessing source extent using major
[Thu Jun 20 07:19:56 2013] Source does appear to be extended
[Thu Jun 20 07:19:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:50 2013] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:50 2013] Initial guess for spatial extent in simple fitting = 8.96"
[Thu Jun 20 07:20:50 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.953
[Thu Jun 20 07:20:50 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 8.96"
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jun 20 07:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src31.csv
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jun 20 07:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src31.csv
[Thu Jun 20 07:20:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:53 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jun 20 07:20:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu Jun 20 07:20:53 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jun 20 07:20:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu Jun 20 07:20:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:21:19 2013] Spatial fit model total counts = 1291.950000, observed total counts = 1104.000000
[Thu Jun 20 07:21:19 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 07:21:19 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:19 2013] Assessing source extent using major
[Thu Jun 20 07:21:19 2013] Source does appear to be extended
[Thu Jun 20 07:21:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:22:02 2013] XMMSAS src. selection expression = ellipse(28411.924591, 31463.012573, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 07:22:02 2013] Not overwriting source region fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_src.reg
[Thu Jun 20 07:22:02 2013] Extracting stamp from image fullrun_pn_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (290, 325) - (365, 400)
[Thu Jun 20 07:22:02 2013] XMMSAS bgd. selection expression = annulus(28411.924591, 31463.012573, 1087.500000, 2175.000000, X, Y) && !ellipse(27490.130600, 27398.644600, 2175.331263, 2175.331263, 0.000000, X, Y) && !ellipse(27140.070000, 25967.904000, 5177.016149, 5177.016149, 0.000000, X, Y) && !ellipse(27590.532867, 28538.864197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.545471, 28645.251221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29982.642820, 32073.418000, 354.065610, 354.065610, 0.000000, X, Y) && !ellipse(30853.038177, 30402.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26344.044403, 28870.594177, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 07:22:02 2013] Writing fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38.gif
[Thu Jun 20 07:22:23 2013] ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Thu Jun 20 07:22:24 2013] Mean detx,y = (17.11, -4478.97) 
[Thu Jun 20 07:22:24 2013] ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_src.img and ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Thu Jun 20 07:22:24 2013] ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Thu Jun 20 07:22:24 2013] Setting source spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Jun 20 07:22:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu Jun 20 07:22:24 2013] ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Thu Jun 20 09:52:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 09:52:01 2013] rmf not generated due to insufficient counts
[Thu Jun 20 09:52:01 2013] fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38.arf exists, delete to re-create
[Thu Jun 20 10:51:37 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:51:37 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 850.00
[Thu Jun 20 10:51:37 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_bgd.pi.gz = 2509.00
[Thu Jun 20 10:51:37 2013] Got source and background scale factors 1240562.000000, 6014493.000000
[Thu Jun 20 10:51:37 2013] User source parameters:
  Position = (327.1, 362.2) = 3 8 6.06 41 0 45.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 332.5 +/- 30.2
  Background aperture counts = 517.5
  Rate = 0.007 +/- 0.0006

[Thu Jun 20 10:51:37 2013] Updating counts from extracted products
[Thu Jun 20 10:51:37 2013] Set source signif. to 332.49/22.75 = 14.62
[Thu Jun 20 10:51:54 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:51:54 2013] Using photon index=1.80, rate=0.00668, arf fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38.arf
[Thu Jun 20 10:51:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:51:54 2013] Updating source flux to 3.3e-14
[Thu Jun 20 10:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 10:53:21 2013] xmm0112880701/analysis//spectral/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete