[Thu Jun 20 07:18:00 2013] Detection parameters:
  Position = (446.8, 466.6) = 3 7 19.96 41 8 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.5 +/- 16.0
  Background counts = 29.6
  Rate = 0.003 +/- 0.0003

[Thu Jun 20 07:18:07 2013] Off-axis axis estimate = 16.26'
[Thu Jun 20 07:19:16 2013] Using EEF radius (= 14.56 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 07:19:16 2013] Initial guess for spatial extent in simple fitting = 14.56"
[Thu Jun 20 07:19:16 2013] source mask rpix=3.3, npix_max = 59, mask sum = 48, frac = 0.811
[Thu Jun 20 07:19:16 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 14.56"
[Thu Jun 20 07:19:18 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src26.ximg exists
[Thu Jun 20 07:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src26.csv
[Thu Jun 20 07:19:18 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Jun 20 07:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src26.csv
[Thu Jun 20 07:19:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:20 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Jun 20 07:19:20 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jun 20 07:19:20 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Jun 20 07:19:20 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jun 20 07:19:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:55 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 19.261524 pixels away
[Thu Jun 20 07:19:56 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:19:56 2013] Assessing source extent using major
[Thu Jun 20 07:19:56 2013] Source does appear to be extended
[Thu Jun 20 07:19:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:50 2013] Using EEF radius (= 14.56 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:50 2013] Initial guess for spatial extent in simple fitting = 14.56"
[Thu Jun 20 07:20:50 2013] source mask rpix=3.3, npix_max = 59, mask sum = 48, frac = 0.811
[Thu Jun 20 07:20:50 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 14.56"
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src25.ximg exists
[Thu Jun 20 07:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src25.csv
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Jun 20 07:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src25.csv
[Thu Jun 20 07:20:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:53 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Jun 20 07:20:53 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu Jun 20 07:20:53 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Jun 20 07:20:53 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu Jun 20 07:20:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:21:19 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 19.261524 pixels away
[Thu Jun 20 07:21:19 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:19 2013] Assessing source extent using major
[Thu Jun 20 07:21:19 2013] Source does appear to be extended
[Thu Jun 20 07:21:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:22:02 2013] XMMSAS src. selection expression = ellipse(38822.798920, 40549.518463, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 07:22:02 2013] Not overwriting source region fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_src.reg
[Thu Jun 20 07:22:02 2013] Extracting stamp from image fullrun_pn_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (409, 429) - (484, 504)
[Thu Jun 20 07:22:02 2013] XMMSAS bgd. selection expression = annulus(38822.798920, 40549.518463, 1087.500000, 2175.000000, X, Y)
[Thu Jun 20 07:22:02 2013] Writing fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26.gif
[Thu Jun 20 07:22:22 2013] ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Thu Jun 20 07:22:22 2013] Mean detx,y = (7843.47, -15739.56) 
[Thu Jun 20 07:22:22 2013] ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_src.img and ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Thu Jun 20 07:22:22 2013] ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Thu Jun 20 07:22:22 2013] Setting source spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jun 20 07:22:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Jun 20 07:22:22 2013] ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Thu Jun 20 09:52:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 09:52:01 2013] rmf not generated due to insufficient counts
[Thu Jun 20 09:52:01 2013] fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Thu Jun 20 10:51:35 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:51:35 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 281.00
[Thu Jun 20 10:51:35 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_bgd.pi.gz = 880.00
[Thu Jun 20 10:51:35 2013] Got source and background scale factors 874876.000000, 2483462.000000
[Thu Jun 20 10:51:35 2013] User source parameters:
  Position = (446.8, 466.6) = 3 7 19.96 41 8 17.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -29.0 +/- 17.8
  Background aperture counts = 310.0
  Rate = -0.0006 +/- 0.0004

[Thu Jun 20 10:51:35 2013] Updating counts from extracted products
[Thu Jun 20 10:51:35 2013] Set source signif. to -29.01/17.61 = -1.65
[Thu Jun 20 10:51:53 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:51:53 2013] Using photon index=1.80, rate=-0.000582, arf fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26.arf
[Thu Jun 20 10:51:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:51:53 2013] Updated flux is not positive, keeping original flux
[Thu Jun 20 10:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 10:53:21 2013] xmm0112880701/analysis//spectral/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete