[Thu Jun 20 07:17:59 2013] Detection parameters:
  Position = (309.1, 286.0) = 3 8 13.01 40 55 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3907.3 +/- 84.1
  Background counts = 114.8
  Rate = 0.09 +/- 0.002

[Thu Jun 20 07:18:07 2013] Off-axis axis estimate = 1.18'
[Thu Jun 20 07:19:16 2013] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:16 2013] Initial guess for spatial extent in simple fitting = 7.02"
[Thu Jun 20 07:19:16 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Thu Jun 20 07:19:16 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 7.02"
[Thu Jun 20 07:19:18 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src19.ximg exists
[Thu Jun 20 07:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src19.csv
[Thu Jun 20 07:19:18 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Jun 20 07:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src19.csv
[Thu Jun 20 07:19:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:20 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Jun 20 07:19:20 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Jun 20 07:19:20 2013] Fit fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Jun 20 07:19:55 2013] Spatial fit model total counts = 15269.500000, observed total counts = 15271.000000
[Thu Jun 20 07:19:55 2013] Offset between fit and detection position for source 19 = 5.458036 pixels
[Thu Jun 20 07:19:55 2013] 15203.780000 total counts/ 9456.390000 bgd. counts: snr = 59.102790
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 5.458036 pixels
  Position = (310.5, 291.3) = 3 8 12.45 40 55 35.5
  Extent = 14.0 (14.0-28.1)", rotation angle = 0
  Source counts = 5747.4 +/- 123.3
  Background counts = 9456.4
  Rate = 0.1 +/- 0.002
[Thu Jun 20 07:19:56 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:19:56 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:19:56 2013] Source does appear to be extended
[Thu Jun 20 07:19:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:19:56 2013] Source is confused with source 15
[Thu Jun 20 07:20:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:50 2013] Initial guess for spatial extent in simple fitting = 14.04"
[Thu Jun 20 07:20:50 2013] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.881
[Thu Jun 20 07:20:50 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 14.04"
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src18.ximg exists
[Thu Jun 20 07:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src18.csv
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Jun 20 07:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src18.csv
[Thu Jun 20 07:20:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:53 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Jun 20 07:20:53 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Jun 20 07:20:53 2013] Fit fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Thu Jun 20 07:21:19 2013] Spatial fit model total counts = 28639.200000, observed total counts = 28662.000000
[Thu Jun 20 07:21:19 2013] Offset between fit and detection position for source 19 = 8.013487 pixels
[Thu Jun 20 07:21:19 2013] 28185.900000 total counts/ 10800.400000 bgd. counts: snr = 167.288954
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 8.013487 pixels
  Position = (312.5, 299.0) = 3 8 11.69 40 56 9.3
  Extent = 21.6 (20.4-23.7)", rotation angle = 0
  Source counts = 17385.5 +/- 167.9
  Background counts = 10800.4
  Rate = 0.3 +/- 0.003
[Thu Jun 20 07:21:19 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:19 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:21:19 2013] Source does appear to be extended
[Thu Jun 20 07:21:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:22:01 2013] Counts = 17385.500000, rescaling region sizes by 3.000000
[Thu Jun 20 07:22:01 2013] XMMSAS src. selection expression = ellipse(27140.070000, 25967.904000, 3882.762112, 3882.762112, 0.000000, X, Y)
[Thu Jun 20 07:22:01 2013] Not overwriting source region fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_src.reg
[Thu Jun 20 07:22:01 2013] Extracting stamp from image fullrun_pn_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (89, 76) - (536, 522)
[Thu Jun 20 07:22:02 2013] XMMSAS bgd. selection expression = annulus(27140.070000, 25967.904000, 19413.810559, 38827.621117, X, Y) && !ellipse(26286.897200, 22773.634000, 1219.320035, 1219.320035, 0.000000, X, Y) && !ellipse(26136.643532, 22043.523360, 1292.488037, 422.756812, 105.776400, X, Y) && !ellipse(26002.597600, 21508.544000, 989.568028, 989.568028, 0.000000, X, Y) && !ellipse(25615.335563, 19946.302636, 2200.768063, 477.622997, 104.655548, X, Y) && !ellipse(25510.442200, 19469.208000, 1055.648030, 1055.648030, 0.000000, X, Y) && !ellipse(24053.076200, 13762.188000, 917.392026, 917.392026, 0.000000, X, Y) && !ellipse(25235.897083, 18398.104710, 1591.136046, 430.441902, 285.476670, X, Y) && !ellipse(25018.448860, 17564.832200, 1591.136046, 447.460013, 284.976000, X, Y) && !ellipse(24488.033600, 15484.476000, 1006.712029, 1006.712029, 0.000000, X, Y) && !ellipse(24405.947518, 15099.782253, 1799.048052, 454.816405, 105.968896, X, Y) && !ellipse(24257.486000, 14529.228800, 1799.048052, 463.509613, 105.980700, X, Y) && !ellipse(24147.334600, 14131.882000, 1054.464030, 1054.464030, 0.000000, X, Y) && !ellipse(27490.130600, 27398.644600, 2175.331263, 2175.331263, 0.000000, X, Y) && !ellipse(26744.947400, 24466.234000, 1443.224042, 388.212811, 285.080000, X, Y) && !ellipse(26647.486200, 24083.578000, 919.384026, 919.384026, 0.000000, X, Y) && !ellipse(26399.170200, 23065.094000, 929.664027, 929.664027, 0.000000, X, Y) && !ellipse(38141.221039, 16301.378830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27590.532867, 28538.864197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28610.780975, 28411.595367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29143.794037, 28113.032013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12047.871800, 27165.266600, 734.424821, 334.927210, 280.518000, X, Y) && !ellipse(38607.948639, 17078.645294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.545471, 28645.251221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38822.798920, 40549.518463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21472.994904, 39533.117493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34272.139400, 36362.277800, 524.336815, 368.670411, 13.732076, X, Y) && !ellipse(13172.933914, 36070.348633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29982.642820, 32073.418000, 354.065610, 354.065610, 0.000000, X, Y) && !ellipse(28411.924591, 31463.012573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32899.452454, 30780.919617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30853.038177, 30402.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10648.715919, 30074.411011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34555.675800, 29587.928600, 400.834412, 400.834412, 0.000000, X, Y) && !ellipse(33121.118200, 29292.725800, 407.602412, 407.602412, 0.000000, X, Y) && !ellipse(32679.018646, 29011.584198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26344.044403, 28870.594177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22424.108704, 28982.416046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31710.668396, 28917.301453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16453.369390, 28309.305121, 666.061618, 363.990112, 90.878988, X, Y) && !ellipse(21189.571340, 27010.521400, 399.762412, 399.762412, 0.000000, X, Y) && !ellipse(20940.522000, 25606.140000, 508.623215, 237.252007, 79.755000, X, Y) && !ellipse(29708.494000, 24805.444000, 1268.064036, 1268.064036, 0.000000, X, Y) && !ellipse(24144.132263, 24578.850830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32302.323090, 24111.419647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25345.108215, 23638.712921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39170.244019, 22501.388641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33266.650970, 21417.283096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17095.950775, 21176.126785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19915.191200, 20644.832800, 410.145612, 410.145612, 0.000000, X, Y) && !ellipse(28530.689362, 20178.361465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30233.505676, 19887.971619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20730.468600, 18566.763800, 448.130413, 448.130413, 0.000000, X, Y) && !ellipse(29144.471069, 18304.855972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25955.472900, 18214.993851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33607.593903, 18034.654968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33576.997345, 16220.036697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21484.001328, 44586.902039, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 07:22:02 2013] Writing fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19.gif
[Thu Jun 20 07:22:14 2013] ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Thu Jun 20 07:22:17 2013] Mean detx,y = (126.88, -202.99) 
[Thu Jun 20 07:22:17 2013] ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_src.img and ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Thu Jun 20 07:22:17 2013] ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Thu Jun 20 07:22:17 2013] Setting source spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jun 20 07:22:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Jun 20 07:22:17 2013] ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Thu Jun 20 07:22:50 2013] fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19.rmf exists, delete to re-create
[Thu Jun 20 10:51:32 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:51:32 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 1333967.00
[Thu Jun 20 10:51:32 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_bgd.pi.gz = 3314.00
[Thu Jun 20 10:51:32 2013] Got source and background scale factors 41808990.000000, 0.000000
[Thu Jun 20 10:51:32 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu Jun 20 10:51:53 2013] No arf file for this source, not re-computing flux
[Thu Jun 20 10:52:46 2013] Flag c found in src. 19 procflags, skipping spectral fitting
[Thu Jun 20 10:52:46 2013] Source 19 has no response, skipping
[Thu Jun 20 10:53:21 2013] xmm0112880701/analysis//spectral/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete