[Thu Jun 20 07:17:59 2013] Detection parameters:
  Position = (439.0, 187.9) = 3 7 23.25 40 48 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1158.1 +/- 40.5
  Background counts = 34.6
  Rate = 0.02 +/- 0.0008

[Thu Jun 20 07:18:07 2013] Off-axis axis estimate = 12.96'
[Thu Jun 20 07:19:16 2013] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 07:19:16 2013] Initial guess for spatial extent in simple fitting = 12.91"
[Thu Jun 20 07:19:16 2013] source mask rpix=3.0, npix_max = 48, mask sum = 41, frac = 0.852
[Thu Jun 20 07:19:16 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 12.91"
[Thu Jun 20 07:19:18 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src18.ximg exists
[Thu Jun 20 07:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src18.csv
[Thu Jun 20 07:19:18 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Jun 20 07:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src18.csv
[Thu Jun 20 07:19:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:20 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Jun 20 07:19:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jun 20 07:19:20 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Jun 20 07:19:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jun 20 07:19:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:55 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 16.471611 pixels away
[Thu Jun 20 07:19:56 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:19:56 2013] Assessing source extent using major
[Thu Jun 20 07:19:56 2013] Source does appear to be extended
[Thu Jun 20 07:19:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:50 2013] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:50 2013] Initial guess for spatial extent in simple fitting = 12.91"
[Thu Jun 20 07:20:50 2013] source mask rpix=3.0, npix_max = 48, mask sum = 41, frac = 0.852
[Thu Jun 20 07:20:50 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 12.91"
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src17.ximg exists
[Thu Jun 20 07:20:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src17.csv
[Thu Jun 20 07:20:52 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Jun 20 07:20:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src17.csv
[Thu Jun 20 07:20:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:53 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Jun 20 07:20:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu Jun 20 07:20:53 2013] fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Jun 20 07:20:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu Jun 20 07:20:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:21:19 2013] Source 18 is offset by 7.781138 and 4.172308 pixels which is larger than
2 X fitted extent = 7.318805 x 7.318805, not incorporating fit results
[Thu Jun 20 07:21:19 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:19 2013] Assessing source extent using major
[Thu Jun 20 07:21:19 2013] Source does appear to be extended
[Thu Jun 20 07:21:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:22:01 2013] Counts = 1158.125244, rescaling region sizes by 2.000000
[Thu Jun 20 07:22:01 2013] XMMSAS src. selection expression = ellipse(38141.221039, 16301.378830, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 20 07:22:01 2013] Not overwriting source region fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_src.reg
[Thu Jun 20 07:22:01 2013] Extracting stamp from image fullrun_pn_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (364, 113) - (514, 263)
[Thu Jun 20 07:22:01 2013] XMMSAS bgd. selection expression = annulus(38141.221039, 16301.378830, 4350.000000, 8700.000000, X, Y) && !ellipse(27140.070000, 25967.904000, 5177.016149, 5177.016149, 0.000000, X, Y) && !ellipse(38607.948639, 17078.645294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29708.494000, 24805.444000, 1268.064036, 1268.064036, 0.000000, X, Y) && !ellipse(32302.323090, 24111.419647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39170.244019, 22501.388641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33266.650970, 21417.283096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30233.505676, 19887.971619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.471069, 18304.855972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33607.593903, 18034.654968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33576.997345, 16220.036697, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 07:22:01 2013] Writing fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18.gif
[Thu Jun 20 07:22:13 2013] ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0112880701/products/events/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Thu Jun 20 07:22:14 2013] Mean detx,y = (13023.98, 7627.18) 
[Thu Jun 20 07:22:14 2013] ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_src.img and ../../xmm0112880701/products/images/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Thu Jun 20 07:22:14 2013] ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Thu Jun 20 07:22:14 2013] Setting source spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jun 20 07:22:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Jun 20 07:22:14 2013] ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Thu Jun 20 07:22:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 07:22:50 2013] rmf not generated due to insufficient counts
[Thu Jun 20 07:22:50 2013] fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Thu Jun 20 10:51:31 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:51:31 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 2061.00
[Thu Jun 20 10:51:32 2013] Total counts from fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_bgd.pi.gz = 13555.00
[Thu Jun 20 10:51:32 2013] Got source and background scale factors 3117135.000000, 49697200.000000
[Thu Jun 20 10:51:32 2013] User source parameters:
  Position = (439.0, 187.9) = 3 7 23.25 40 48 3.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1210.8 +/- 46.4
  Background aperture counts = 850.2
  Rate = 0.02 +/- 0.0009

[Thu Jun 20 10:51:32 2013] Updating counts from extracted products
[Thu Jun 20 10:51:32 2013] Set source signif. to 1210.80/29.16 = 41.52
[Thu Jun 20 10:51:53 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:51:53 2013] Using photon index=1.80, rate=0.0243, arf fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18.arf
[Thu Jun 20 10:51:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:51:53 2013] Updating source flux to 2.8e-13
[Thu Jun 20 10:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 10:53:21 2013] xmm0112880701/analysis//spectral/fullrun_pn_xmm0112880701_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete