[Thu Jun 20 07:18:18 2013] Detection parameters:
  Position = (342.3, 170.7) = 3 8 0.28 40 46 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.3 +/- 8.5
  Background counts = 13.0
  Rate = 0.001 +/- 0.0003

[Thu Jun 20 07:18:20 2013] Off-axis axis estimate = 9.79'
[Thu Jun 20 07:19:24 2013] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:24 2013] Initial guess for spatial extent in simple fitting = 11.33"
[Thu Jun 20 07:19:24 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Thu Jun 20 07:19:24 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 11.33"
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src47.ximg exists
[Thu Jun 20 07:19:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src47.csv
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src47_1.ximg exists
[Thu Jun 20 07:19:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src47.csv
[Thu Jun 20 07:19:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:28 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Thu Jun 20 07:19:28 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Thu Jun 20 07:19:28 2013] Fit fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Thu Jun 20 07:20:26 2013] Spatial fit model total counts = 170.081000, observed total counts = 170.000000
[Thu Jun 20 07:20:26 2013] Offset between fit and detection position for source 43 = 0.312824 pixels
[Thu Jun 20 07:20:26 2013] 172.287500 total counts/ 160.137000 bgd. counts: snr = 0.960170
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.312824 pixels
  Position = (342.6, 170.6) = 3 8 0.17 40 46 50.4
  Extent = 2.8" x 2.8", rotation angle = 0
  Source counts = 12.2 +/- 13.1
  Background counts = 160.1
  Rate = 0.0002 +/- 0.0003
  Deleting source due to low Poisson probability