[Thu Jun 20 07:18:16 2013] Detection parameters:
  Position = (307.0, 284.1) = 3 8 13.81 40 54 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.1 +/- 20.3
  Background counts = 49.8
  Rate = 0.003 +/- 0.0004

[Thu Jun 20 07:18:20 2013] Off-axis axis estimate = 1.21'
[Thu Jun 20 07:19:24 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:24 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Thu Jun 20 07:19:24 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Thu Jun 20 07:19:24 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 7.03"
[Thu Jun 20 07:19:26 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jun 20 07:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src21.csv
[Thu Jun 20 07:19:26 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jun 20 07:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src21.csv
[Thu Jun 20 07:19:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jun 20 07:19:27 2013] Fit fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Jun 20 07:20:26 2013] Source 26 is offset by -0.946604 and -7.367283 pixels which is larger than
2 X fitted extent = 6.467724 x 6.467724, not incorporating fit results
[Thu Jun 20 07:20:26 2013] Spatial fit model total counts = 1298.000000, observed total counts = 1211.000000
[Thu Jun 20 07:20:26 2013] Offset between fit and detection position for source 26 = 2.715713 pixels
[Thu Jun 20 07:20:26 2013] Warning, changing simple spatial fit ID from 21 to 26
[Thu Jun 20 07:20:26 2013] 1328.810000 total counts/ 1227.610000 bgd. counts: snr = 2.888353
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 2.715713 pixels
  Position = (306.8, 281.4) = 3 8 13.90 40 54 52.6
  Extent = 14.5 (14.4-28.9)" x 4.3 (2.7-6.5)", rotation angle = 96 (83-108) degrees
  Source counts = 101.2 +/- 36.5
  Background counts = 1227.6
  Rate = 0.002 +/- 0.0007
[Thu Jun 20 07:20:26 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:26 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:20:26 2013] Source does appear to be extended
[Thu Jun 20 07:20:26 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.23
[Thu Jun 20 07:20:26 2013] Source is asymmetric
[Thu Jun 20 07:20:26 2013] Source is confused with source 28
[Thu Jun 20 07:20:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:56 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Thu Jun 20 07:20:56 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.884
[Thu Jun 20 07:20:56 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 9.39"
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src21.csv
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src21.csv
[Thu Jun 20 07:20:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jun 20 07:20:57 2013] Fit fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu Jun 20 07:21:38 2013] Warning, spatial fit 21 centroid is now closest to src. 28
[Thu Jun 20 07:21:38 2013] Spatial fit model total counts = 1291.160000, observed total counts = 1211.000000
[Thu Jun 20 07:21:38 2013] Offset between fit and detection position for source 26 = 1.244591 pixels
[Thu Jun 20 07:21:38 2013] Warning, changing simple spatial fit ID from 21 to 26
[Thu Jun 20 07:21:38 2013] 1260.055800 total counts/ 1204.840000 bgd. counts: snr = 1.590738
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.244591 pixels
  Position = (306.8, 282.6) = 3 8 13.89 40 54 58.0
  Extent = 5.2 (2.1-11.4)", rotation angle = 0
  Source counts = 55.2 +/- 35.5
  Background counts = 1204.8
  Rate = 0.001 +/- 0.0007
  Deleting source due to low Poisson probability