[Thu Jun 20 07:18:15 2013] Detection parameters:
  Position = (398.0, 341.0) = 3 7 38.85 40 59 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.5 +/- 12.5
  Background counts = 14.5
  Rate = 0.003 +/- 0.0004

[Thu Jun 20 07:18:20 2013] Off-axis axis estimate = 7.85'
[Thu Jun 20 07:19:24 2013] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:24 2013] Initial guess for spatial extent in simple fitting = 10.35"
[Thu Jun 20 07:19:24 2013] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.025
[Thu Jun 20 07:19:24 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 10.35"
[Thu Jun 20 07:19:26 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src20.ximg exists
[Thu Jun 20 07:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src20.csv
[Thu Jun 20 07:19:26 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Jun 20 07:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src20.csv
[Thu Jun 20 07:19:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Jun 20 07:19:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Jun 20 07:19:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu Jun 20 07:19:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:26 2013] Warning, spatial fit 20 centroid is now closest to src. 24
[Thu Jun 20 07:20:26 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:26 2013] Assessing source extent using major
[Thu Jun 20 07:20:26 2013] Source does appear to be extended
[Thu Jun 20 07:20:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:56 2013] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:56 2013] Initial guess for spatial extent in simple fitting = 10.35"
[Thu Jun 20 07:20:56 2013] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.025
[Thu Jun 20 07:20:56 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 10.35"
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src20.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src20.csv
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src20.csv
[Thu Jun 20 07:20:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jun 20 07:20:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:21:38 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 14.183683 pixels away
[Thu Jun 20 07:21:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:38 2013] Assessing source extent using major
[Thu Jun 20 07:21:38 2013] Source does appear to be extended
[Thu Jun 20 07:21:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 10:49:21 2013] XMMSAS src. selection expression = ellipse(34574.603363, 29616.280396, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 10:49:21 2013] Not overwriting source region fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_src.reg
[Thu Jun 20 10:49:21 2013] Extracting stamp from image fullrun_mos2_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (360, 303) - (435, 378)
[Thu Jun 20 10:49:21 2013] XMMSAS bgd. selection expression = annulus(34574.603363, 29616.280396, 1087.500000, 2175.000000, X, Y) && !ellipse(32975.234000, 29179.777800, 1524.328044, 398.864811, 331.101000, X, Y) && !ellipse(32164.608000, 28631.120000, 1524.328044, 1524.328044, 0.000000, X, Y)
[Thu Jun 20 10:49:21 2013] Writing fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23.gif
[Thu Jun 20 10:49:23 2013] ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Thu Jun 20 10:49:23 2013] Mean detx,y = (-6227.25, 4122.84) 
[Thu Jun 20 10:49:23 2013] ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_src.img and ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Thu Jun 20 10:49:23 2013] ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Thu Jun 20 10:49:23 2013] Setting source spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Jun 20 10:49:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Jun 20 10:49:23 2013] ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Thu Jun 20 10:49:35 2013] Not generating rmf since there are only 92 counts
[Thu Jun 20 10:49:35 2013] rmf not generated due to insufficient counts
[Thu Jun 20 10:49:35 2013] fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Thu Jun 20 10:52:10 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:52:10 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 185.00
[Thu Jun 20 10:52:10 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_bgd.pi.gz = 717.00
[Thu Jun 20 10:52:10 2013] Got source and background scale factors 1190144.000000, 8624144.000000
[Thu Jun 20 10:52:10 2013] User source parameters:
  Position = (398.0, 341.0) = 3 7 38.85 40 59 10.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 86.1 +/- 14.6
  Background aperture counts = 98.9
  Rate = 0.002 +/- 0.0003

[Thu Jun 20 10:52:10 2013] Updating counts from extracted products
[Thu Jun 20 10:52:10 2013] Set source signif. to 86.05/9.95 = 8.65
[Thu Jun 20 10:52:17 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:52:17 2013] Using photon index=1.80, rate=0.00165, arf fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23.arf
[Thu Jun 20 10:52:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:52:17 2013] Updating source flux to 3.4e-14
[Thu Jun 20 10:52:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 10:52:46 2013] xmm0112880701/analysis//spectral/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete