[Thu Jun 20 07:18:15 2013] Detection parameters:
  Position = (331.9, 372.9) = 3 8 4.21 41 1 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.9 +/- 13.5
  Background counts = 21.1
  Rate = 0.002 +/- 0.0004

[Thu Jun 20 07:18:20 2013] Off-axis axis estimate = 5.92'
[Thu Jun 20 07:19:24 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:24 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Thu Jun 20 07:19:24 2013] source mask rpix=2.2, npix_max = 28, mask sum = 34, frac = 1.203
[Thu Jun 20 07:19:24 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.39"
[Thu Jun 20 07:19:26 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src25.ximg exists
[Thu Jun 20 07:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src25.csv
[Thu Jun 20 07:19:26 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Jun 20 07:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src25.csv
[Thu Jun 20 07:19:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Jun 20 07:19:27 2013] Fit fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Jun 20 07:20:26 2013] Warning, spatial fit 25 centroid is now closest to src. 37
[Thu Jun 20 07:20:26 2013] Spatial fit model total counts = 445.072000, observed total counts = 370.000000
[Thu Jun 20 07:20:26 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 07:20:26 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:26 2013] Assessing source extent using major
[Thu Jun 20 07:20:26 2013] Source does appear to be extended
[Thu Jun 20 07:20:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:26 2013] Source is confused with source 16
[Thu Jun 20 07:20:56 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:56 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Thu Jun 20 07:20:56 2013] source mask rpix=2.2, npix_max = 28, mask sum = 34, frac = 1.203
[Thu Jun 20 07:20:56 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.39"
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src25.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src25.csv
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src25.csv
[Thu Jun 20 07:20:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu Jun 20 07:20:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:21:38 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.281734 pixels away
[Thu Jun 20 07:21:38 2013] Source 21 is offset by -5.329462 and -5.873356 pixels which is larger than
2 X fitted extent = 1.092828 x 1.092828, not incorporating fit results
[Thu Jun 20 07:21:38 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.080950 pixels away
[Thu Jun 20 07:21:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:38 2013] Assessing source extent using major
[Thu Jun 20 07:21:38 2013] Source does appear to be extended
[Thu Jun 20 07:21:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 10:49:21 2013] XMMSAS src. selection expression = ellipse(28829.228821, 32390.940002, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 10:49:21 2013] Not overwriting source region fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_src.reg
[Thu Jun 20 10:49:21 2013] Extracting stamp from image fullrun_mos2_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (294, 335) - (369, 410)
[Thu Jun 20 10:49:21 2013] XMMSAS bgd. selection expression = annulus(28829.228821, 32390.940002, 1087.500000, 2175.000000, X, Y) && !ellipse(28523.537666, 31469.604410, 1434.368041, 482.116557, 109.436040, X, Y) && !ellipse(25464.346000, 29604.714000, 1241.992036, 1241.992036, 0.000000, X, Y) && !ellipse(30026.065582, 32056.390381, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 10:49:21 2013] Writing fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21.gif
[Thu Jun 20 10:49:23 2013] ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Thu Jun 20 10:49:23 2013] Mean detx,y = (33.83, 5337.95) 
[Thu Jun 20 10:49:23 2013] ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_src.img and ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Thu Jun 20 10:49:23 2013] ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Thu Jun 20 10:49:23 2013] Setting source spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Jun 20 10:49:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Jun 20 10:49:23 2013] ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Thu Jun 20 10:49:35 2013] Not generating rmf since there are only 93 counts
[Thu Jun 20 10:49:35 2013] rmf not generated due to insufficient counts
[Thu Jun 20 10:49:35 2013] fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21.arf exists, delete to re-create
[Thu Jun 20 10:52:12 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:52:12 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 310.00
[Thu Jun 20 10:52:12 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_bgd.pi.gz = 778.00
[Thu Jun 20 10:52:12 2013] Got source and background scale factors 1161532.000000, 7139270.000000
[Thu Jun 20 10:52:12 2013] User source parameters:
  Position = (331.9, 372.9) = 3 8 4.21 41 1 31.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 183.4 +/- 18.6
  Background aperture counts = 126.6
  Rate = 0.004 +/- 0.0004

[Thu Jun 20 10:52:12 2013] Updating counts from extracted products
[Thu Jun 20 10:52:12 2013] Set source signif. to 183.42/11.25 = 16.30
[Thu Jun 20 10:52:17 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:52:17 2013] Using photon index=1.80, rate=0.00352, arf fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21.arf
[Thu Jun 20 10:52:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:52:17 2013] Updating source flux to 6.2e-14
[Thu Jun 20 10:52:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 10:52:46 2013] xmm0112880701/analysis//spectral/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete