[Thu Jun 20 07:18:15 2013] Detection parameters:
  Position = (299.2, 209.4) = 3 8 16.81 40 49 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.2 +/- 15.2
  Background counts = 15.1
  Rate = 0.004 +/- 0.0004

[Thu Jun 20 07:18:20 2013] Off-axis axis estimate = 6.46'
[Thu Jun 20 07:19:24 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:24 2013] Initial guess for spatial extent in simple fitting = 9.66"
[Thu Jun 20 07:19:24 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Thu Jun 20 07:19:24 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 9.66"
[Thu Jun 20 07:19:26 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src12.ximg exists
[Thu Jun 20 07:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src12.csv
[Thu Jun 20 07:19:26 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Jun 20 07:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src12.csv
[Thu Jun 20 07:19:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jun 20 07:19:27 2013] Fit fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Jun 20 07:20:26 2013] Spatial fit model total counts = 305.590000, observed total counts = 295.000000
[Thu Jun 20 07:20:26 2013] Offset between fit and detection position for source 15 = 0.377845 pixels
[Thu Jun 20 07:20:26 2013] 305.620000 total counts/ 188.803000 bgd. counts: snr = 8.501618
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.377845 pixels
  Position = (299.4, 209.7) = 3 8 16.72 40 49 40.5
  Extent = 7.3 (5.1-9.9)", rotation angle = 0
  Source counts = 116.8 +/- 17.5
  Background counts = 188.8
  Rate = 0.002 +/- 0.0003
[Thu Jun 20 07:20:26 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:26 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:20:26 2013] Source does appear to be extended
[Thu Jun 20 07:20:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:56 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Jun 20 07:20:56 2013] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.326
[Thu Jun 20 07:20:56 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.27"
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src12.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src12.csv
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src12.csv
[Thu Jun 20 07:20:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Jun 20 07:20:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:21:38 2013] Warning, spatial fit 12 centroid is now closest to src. 51
[Thu Jun 20 07:21:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:38 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:21:38 2013] Source does appear to be extended
[Thu Jun 20 07:21:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 10:49:21 2013] XMMSAS src. selection expression = ellipse(25999.835000, 18192.272800, 436.081813, 436.081813, 0.000000, X, Y)
[Thu Jun 20 10:49:21 2013] Not overwriting source region fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_src.reg
[Thu Jun 20 10:49:21 2013] Extracting stamp from image fullrun_mos2_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (274, 185) - (324, 235)
[Thu Jun 20 10:49:21 2013] XMMSAS bgd. selection expression = annulus(25999.835000, 18192.272800, 726.803021, 1453.606042, X, Y)
[Thu Jun 20 10:49:21 2013] Writing fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15.gif
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Thu Jun 20 10:49:22 2013] Mean detx,y = (-826.32, -9061.60) 
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_src.img and ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Thu Jun 20 10:49:22 2013] Setting source spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 20 10:49:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Thu Jun 20 10:49:35 2013] fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15.rmf exists, delete to re-create
[Thu Jun 20 10:49:35 2013] fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Thu Jun 20 10:52:07 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:52:08 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 180.00
[Thu Jun 20 10:52:08 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_bgd.pi.gz = 395.00
[Thu Jun 20 10:52:08 2013] Got source and background scale factors 599032.000000, 4393094.000000
[Thu Jun 20 10:52:08 2013] User source parameters:
  Position = (299.4, 209.7) = 3 8 16.72 40 49 40.5
  Extent = 7.3 (5.1-9.9)", rotation angle = 0
  Source aperture counts = 126.1 +/- 14.4
  Background aperture counts = 53.9
  Rate = 0.002 +/- 0.0003

[Thu Jun 20 10:52:17 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:52:17 2013] Using photon index=1.80, rate=0.00224, arf fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15.arf
[Thu Jun 20 10:52:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:52:17 2013] Updating source flux to 4.5e-14
[Thu Jun 20 10:52:46 2013] xmm0112880701/analysis//spectral/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete