[Thu Jun 20 07:18:14 2013] Detection parameters:
  Position = (329.7, 328.0) = 3 8 5.08 40 58 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 469.8 +/- 33.3
  Background counts = 35.3
  Rate = 0.01 +/- 0.0008

[Thu Jun 20 07:18:20 2013] Off-axis axis estimate = 3.12'
[Thu Jun 20 07:19:24 2013] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:24 2013] Initial guess for spatial extent in simple fitting = 7.99"
[Thu Jun 20 07:19:24 2013] source mask rpix=1.8, npix_max = 21, mask sum = 11, frac = 0.504
[Thu Jun 20 07:19:24 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.99"
[Thu Jun 20 07:19:25 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun 20 07:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src6.csv
[Thu Jun 20 07:19:25 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun 20 07:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src6.csv
[Thu Jun 20 07:19:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun 20 07:19:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun 20 07:19:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 20 07:19:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:26 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 10.135586 pixels away
[Thu Jun 20 07:20:26 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:26 2013] Assessing source extent using major
[Thu Jun 20 07:20:26 2013] Source does appear to be extended
[Thu Jun 20 07:20:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:56 2013] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:56 2013] Initial guess for spatial extent in simple fitting = 7.99"
[Thu Jun 20 07:20:56 2013] source mask rpix=1.8, npix_max = 21, mask sum = 11, frac = 0.504
[Thu Jun 20 07:20:56 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.99"
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src6.csv
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src6.csv
[Thu Jun 20 07:20:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 20 07:20:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:21:38 2013] Source 12 is offset by 7.039319 and 6.347424 pixels which is larger than
2 X fitted extent = 2.483191 x 2.483191, not incorporating fit results
[Thu Jun 20 07:21:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:38 2013] Assessing source extent using major
[Thu Jun 20 07:21:38 2013] Source does appear to be extended
[Thu Jun 20 07:21:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 10:49:21 2013] XMMSAS src. selection expression = ellipse(28634.864746, 28487.669922, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 10:49:21 2013] Not overwriting source region fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 20 10:49:21 2013] Extracting stamp from image fullrun_mos2_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (292, 291) - (367, 366)
[Thu Jun 20 10:49:21 2013] XMMSAS bgd. selection expression = annulus(28634.864746, 28487.669922, 1087.500000, 2175.000000, X, Y) && !ellipse(27489.131280, 27380.379940, 2212.125664, 2212.125664, 0.000000, X, Y) && !ellipse(28376.705627, 26990.097992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28147.032318, 26489.255920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.337189, 25875.129059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25716.414062, 28243.627594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28523.537666, 31469.604410, 1434.368041, 482.116557, 109.436040, X, Y) && !ellipse(25464.346000, 29604.714000, 1241.992036, 1241.992036, 0.000000, X, Y) && !ellipse(32164.608000, 28631.120000, 1524.328044, 1524.328044, 0.000000, X, Y)
[Thu Jun 20 10:49:21 2013] Writing fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12.gif
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Thu Jun 20 10:49:22 2013] Mean detx,y = (-689.60, 1382.28) 
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_src.img and ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Thu Jun 20 10:49:22 2013] Setting source spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 20 10:49:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Thu Jun 20 10:49:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 10:49:35 2013] rmf not generated due to insufficient counts
[Thu Jun 20 10:49:35 2013] fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Thu Jun 20 10:52:06 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:52:06 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 3231.00
[Thu Jun 20 10:52:06 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_bgd.pi.gz = 1747.00
[Thu Jun 20 10:52:06 2013] Got source and background scale factors 1136216.000000, 5325480.000000
[Thu Jun 20 10:52:06 2013] User source parameters:
  Position = (329.7, 328.0) = 3 8 5.08 40 58 13.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2858.3 +/- 57.8
  Background aperture counts = 372.7
  Rate = 0.05 +/- 0.001

[Thu Jun 20 10:52:06 2013] Updating counts from extracted products
[Thu Jun 20 10:52:06 2013] Set source signif. to 2858.27/19.31 = 148.05
[Thu Jun 20 10:52:16 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:52:16 2013] Using photon index=1.80, rate=0.0549, arf fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12.arf
[Thu Jun 20 10:52:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:52:16 2013] Updating source flux to 7.3e-13
[Thu Jun 20 10:52:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 10:52:46 2013] xmm0112880701/analysis//spectral/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete