[Thu Jun 20 07:18:14 2013] Detection parameters:
  Position = (229.8, 238.2) = 3 8 43.41 40 51 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.7 +/- 15.6
  Background counts = 11.2
  Rate = 0.005 +/- 0.0006

[Thu Jun 20 07:18:20 2013] Off-axis axis estimate = 6.62'
[Thu Jun 20 07:19:24 2013] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:24 2013] Initial guess for spatial extent in simple fitting = 9.74"
[Thu Jun 20 07:19:24 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.200
[Thu Jun 20 07:19:24 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 9.74"
[Thu Jun 20 07:19:26 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun 20 07:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src9.csv
[Thu Jun 20 07:19:26 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun 20 07:19:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src9.csv
[Thu Jun 20 07:19:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun 20 07:19:27 2013] Fit fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jun 20 07:20:26 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.394935 pixels away
[Thu Jun 20 07:20:26 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:26 2013] Assessing source extent using major
[Thu Jun 20 07:20:26 2013] Source does appear to be extended
[Thu Jun 20 07:20:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:56 2013] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:56 2013] Initial guess for spatial extent in simple fitting = 9.74"
[Thu Jun 20 07:20:56 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.200
[Thu Jun 20 07:20:56 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 9.74"
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src9.csv
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jun 20 07:20:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src9.csv
[Thu Jun 20 07:20:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun 20 07:20:57 2013] Fit fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jun 20 07:21:38 2013] Spatial fit model total counts = 253.640000, observed total counts = 253.000000
[Thu Jun 20 07:21:38 2013] Offset between fit and detection position for source 11 = 0.232717 pixels
[Thu Jun 20 07:21:38 2013] 256.536400 total counts/ 158.239000 bgd. counts: snr = 7.814213
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.232717 pixels
  Position = (230.0, 238.2) = 3 8 43.32 40 51 44.5
  Extent = 6.6 (4.6-9.0)", rotation angle = 0
  Source counts = 98.3 +/- 16.0
  Background counts = 158.2
  Rate = 0.002 +/- 0.0003
[Thu Jun 20 07:21:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:38 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:21:38 2013] Source does appear to be extended
[Thu Jun 20 07:21:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 10:49:21 2013] XMMSAS src. selection expression = ellipse(19964.193840, 20674.815200, 395.421011, 395.421011, 0.000000, X, Y)
[Thu Jun 20 10:49:21 2013] Not overwriting source region fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 20 10:49:21 2013] Extracting stamp from image fullrun_mos2_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (207, 215) - (253, 261)
[Thu Jun 20 10:49:21 2013] XMMSAS bgd. selection expression = annulus(19964.193840, 20674.815200, 659.035019, 1318.070038, X, Y)
[Thu Jun 20 10:49:21 2013] Writing fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11.gif
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Jun 20 10:49:22 2013] Mean detx,y = (5634.91, -8202.27) 
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_src.img and ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Thu Jun 20 10:49:22 2013] Setting source spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 20 10:49:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Jun 20 10:49:35 2013] Not generating rmf since there are only 98 counts
[Thu Jun 20 10:49:35 2013] rmf not generated due to insufficient counts
[Thu Jun 20 10:49:35 2013] fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Thu Jun 20 10:52:07 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:52:07 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 138.00
[Thu Jun 20 10:52:07 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_bgd.pi.gz = 264.00
[Thu Jun 20 10:52:07 2013] Got source and background scale factors 441980.000000, 4001876.000000
[Thu Jun 20 10:52:07 2013] User source parameters:
  Position = (230.0, 238.2) = 3 8 43.32 40 51 44.5
  Extent = 6.6 (4.6-9.0)", rotation angle = 0
  Source aperture counts = 108.8 +/- 12.8
  Background aperture counts = 29.2
  Rate = 0.002 +/- 0.0002

[Thu Jun 20 10:52:16 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:52:16 2013] Using photon index=1.80, rate=0.00189, arf fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11.arf
[Thu Jun 20 10:52:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:52:17 2013] Updating source flux to 4.7e-14
[Thu Jun 20 10:52:34 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 20 10:52:46 2013] xmm0112880701/analysis//spectral/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete