[Thu Jun 20 07:18:13 2013] Detection parameters:
  Position = (316.8, 315.1) = 3 8 10.05 40 57 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288769.4 +/- 620.1
  Background counts = 44.9
  Rate = 6 +/- 0.01

[Thu Jun 20 07:18:20 2013] Off-axis axis estimate = 1.80'
[Thu Jun 20 07:19:24 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:24 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Thu Jun 20 07:19:24 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Thu Jun 20 07:19:24 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Thu Jun 20 07:19:25 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 20 07:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src1.csv
[Thu Jun 20 07:19:25 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 20 07:19:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src1.csv
[Thu Jun 20 07:19:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 20 07:19:27 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 20 07:19:27 2013] Fit fullrun_mos2_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 20 07:20:26 2013] Spatial fit model total counts = 325142.000000, observed total counts = 300217.000000
[Thu Jun 20 07:20:26 2013] Offset between fit and detection position for source 1 = 0.274658 pixels
[Thu Jun 20 07:20:26 2013] 289550.000000 total counts/ 25600.000000 bgd. counts: snr = 1649.687500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.274658 pixels
  Position = (316.5, 315.3) = 3 8 10.14 40 57 19.9
  Extent = 9.2 (9.2-9.2)", rotation angle = 0
  Source counts = 263950.0 +/- 538.1
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Thu Jun 20 07:20:26 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:26 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:20:26 2013] Source does appear to be extended
[Thu Jun 20 07:20:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:56 2013] Initial guess for spatial extent in simple fitting = 9.22"
[Thu Jun 20 07:20:56 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.911
[Thu Jun 20 07:20:56 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.22"
[Thu Jun 20 07:20:56 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 20 07:20:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src1.csv
[Thu Jun 20 07:20:56 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 20 07:20:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src1.csv
[Thu Jun 20 07:20:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 20 07:20:57 2013] fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 20 07:20:57 2013] Fit fullrun_mos2_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 20 07:21:38 2013] Spatial fit model total counts = 326368.000000, observed total counts = 304962.000000
[Thu Jun 20 07:21:38 2013] Offset between fit and detection position for source 1 = 0.015492 pixels
[Thu Jun 20 07:21:38 2013] 293905.000000 total counts/ 28900.000000 bgd. counts: snr = 1558.852941
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015492 pixels
  Position = (316.5, 315.3) = 3 8 10.14 40 57 19.9
  Extent = 9.2 (9.2-9.2)", rotation angle = 0
  Source counts = 265005.0 +/- 542.1
  Background counts = 28900.0
  Rate = 5 +/- 0.01
[Thu Jun 20 07:21:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:38 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:21:38 2013] Source does appear to be extended
[Thu Jun 20 07:21:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 10:49:20 2013] Counts = 265005.000000, rescaling region sizes by 3.000000
[Thu Jun 20 10:49:20 2013] XMMSAS src. selection expression = ellipse(27489.131280, 27380.379940, 1659.094248, 1659.094248, 0.000000, X, Y)
[Thu Jun 20 10:49:20 2013] Not overwriting source region fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 20 10:49:20 2013] Extracting stamp from image fullrun_mos2_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (221, 220) - (412, 411)
[Thu Jun 20 10:49:20 2013] XMMSAS bgd. selection expression = annulus(27489.131280, 27380.379940, 8295.471239, 16590.942477, X, Y) && !ellipse(28376.705627, 26990.097992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28147.032318, 26489.255920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.337189, 25875.129059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.864746, 28487.669922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38141.080322, 16230.956833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25716.414062, 28243.627594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19964.193840, 20674.815200, 527.228015, 527.228015, 0.000000, X, Y) && !ellipse(28490.032898, 24496.906006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28523.537666, 31469.604410, 1434.368041, 482.116557, 109.436040, X, Y) && !ellipse(25999.835000, 18192.272800, 581.442417, 581.442417, 0.000000, X, Y) && !ellipse(33620.311493, 16187.920135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20886.192800, 25714.277200, 1042.128030, 446.850413, 65.730000, X, Y) && !ellipse(33258.647560, 21432.179200, 518.755215, 518.755215, 0.000000, X, Y) && !ellipse(25464.346000, 29604.714000, 1241.992036, 1241.992036, 0.000000, X, Y) && !ellipse(30026.065582, 32056.390381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26157.953420, 22035.550630, 940.134270, 456.327079, 131.437126, X, Y) && !ellipse(34574.603363, 29616.280396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30247.760529, 19933.134995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32975.234000, 29179.777800, 1524.328044, 398.864811, 331.101000, X, Y) && !ellipse(28829.228821, 32390.940002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26327.046000, 23847.472000, 1502.728043, 1502.728043, 0.000000, X, Y) && !ellipse(25975.576782, 21534.509277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32164.608000, 28631.120000, 1524.328044, 1524.328044, 0.000000, X, Y) && !ellipse(25824.933800, 21101.772000, 1320.664038, 1320.664038, 0.000000, X, Y) && !ellipse(16465.677353, 28286.989532, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 10:49:20 2013] Writing fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1.gif
[Thu Jun 20 10:49:21 2013] ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112880701/products/events/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Jun 20 10:49:22 2013] Mean detx,y = (46.67, 166.70) 
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112880701/products/images/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Jun 20 10:49:22 2013] Setting source spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 20 10:49:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 20 10:49:22 2013] ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Jun 20 10:49:35 2013] fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Thu Jun 20 10:49:35 2013] fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Thu Jun 20 10:52:05 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:52:05 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 346999.00
[Thu Jun 20 10:52:05 2013] Total counts from fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 39982.00
[Thu Jun 20 10:52:05 2013] Got source and background scale factors 8157776.000000, 596263281.000000
[Thu Jun 20 10:52:05 2013] User source parameters:
  Position = (316.5, 315.3) = 3 8 10.14 40 57 19.9
  Extent = 9.2 (9.2-9.2)", rotation angle = 0
  Source aperture counts = 346452.0 +/- 590.1
  Background aperture counts = 547.0
  Rate = 7 +/- 0.01

[Thu Jun 20 10:52:16 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:52:16 2013] Using photon index=1.80, rate=5.09, arf fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1.arf
[Thu Jun 20 10:52:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:52:16 2013] Updating source flux to 5.7e-11
[Thu Jun 20 10:52:46 2013] xmm0112880701/analysis//spectral/fullrun_mos2_xmm0112880701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete