[Thu Jun 20 07:18:08 2013] Detection parameters:
  Position = (333.7, 331.4) = 3 8 3.56 40 58 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.7 +/- 27.0
  Background counts = 42.0
  Rate = 0.005 +/- 0.0006

[Thu Jun 20 07:18:13 2013] Off-axis axis estimate = 3.50'
[Thu Jun 20 07:19:22 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:22 2013] Initial guess for spatial extent in simple fitting = 8.18"
[Thu Jun 20 07:19:22 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.839
[Thu Jun 20 07:19:22 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.18"
[Thu Jun 20 07:19:22 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 20 07:19:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src3.csv
[Thu Jun 20 07:19:22 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 20 07:19:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src3.csv
[Thu Jun 20 07:19:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 20 07:19:23 2013] Fit fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 20 07:20:10 2013] Source 8 is offset by 6.653577 and 6.739764 pixels which is larger than
2 X fitted extent = 3.624874 x 3.624874, not incorporating fit results
[Thu Jun 20 07:20:10 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:10 2013] Assessing source extent using major
[Thu Jun 20 07:20:10 2013] Source does appear to be extended
[Thu Jun 20 07:20:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:53 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:53 2013] Initial guess for spatial extent in simple fitting = 8.18"
[Thu Jun 20 07:20:53 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.839
[Thu Jun 20 07:20:53 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.18"
[Thu Jun 20 07:20:54 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 20 07:20:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src3.csv
[Thu Jun 20 07:20:54 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 20 07:20:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src3.csv
[Thu Jun 20 07:20:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:55 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 20 07:20:55 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 20 07:20:55 2013] Fit fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 20 07:21:29 2013] Source 8 is offset by 6.657048 and 6.740914 pixels which is larger than
2 X fitted extent = 3.633687 x 3.633687, not incorporating fit results
[Thu Jun 20 07:21:29 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:29 2013] Assessing source extent using major
[Thu Jun 20 07:21:29 2013] Source does appear to be extended
[Thu Jun 20 07:21:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 09:52:01 2013] XMMSAS src. selection expression = ellipse(28979.413208, 28781.621490, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 09:52:01 2013] Not overwriting source region fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_src.reg
[Thu Jun 20 09:52:01 2013] Extracting stamp from image fullrun_mos1_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (296, 294) - (371, 369)
[Thu Jun 20 09:52:01 2013] XMMSAS bgd. selection expression = annulus(28979.413208, 28781.621490, 1087.500000, 2175.000000, X, Y) && !ellipse(27497.830760, 27390.908740, 2242.238465, 2242.238465, 0.000000, X, Y) && !ellipse(27631.922119, 29130.991486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26840.383545, 29310.073212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28318.462250, 29088.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31828.616003, 26311.906551, 2845.408082, 416.926542, 16.609599, X, Y) && !ellipse(32401.776000, 26148.015000, 2845.408082, 384.413611, 17.063000, X, Y) && !ellipse(31602.070000, 26294.366000, 1379.808040, 1379.808040, 0.000000, X, Y)
[Thu Jun 20 09:52:01 2013] Writing fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8.gif
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/events/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0112880701/products/events/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Thu Jun 20 09:52:02 2013] Mean detx,y = (1962.18, 813.16) 
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/images/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_src.img and ../../xmm0112880701/products/images/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/spectra/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Thu Jun 20 09:52:02 2013] Setting source spectrum file to fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jun 20 09:52:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/lightcurves/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Thu Jun 20 10:16:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 10:16:29 2013] rmf not generated due to insufficient counts
[Thu Jun 20 10:51:56 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:51:56 2013] Total counts from fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 1803.00
[Thu Jun 20 10:51:56 2013] Total counts from fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1997.00
[Thu Jun 20 10:51:56 2013] Got source and background scale factors 1263508.000000, 5661540.000000
[Thu Jun 20 10:51:56 2013] User source parameters:
  Position = (333.7, 331.4) = 3 8 3.56 40 58 26.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1357.3 +/- 43.5
  Background aperture counts = 445.7
  Rate = 0.03 +/- 0.0008

[Thu Jun 20 10:51:56 2013] Updating counts from extracted products
[Thu Jun 20 10:51:56 2013] Set source signif. to 1357.32/21.11 = 64.29
[Thu Jun 20 10:52:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:52:04 2013] Using photon index=1.80, rate=0.0261, arf fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8.arf
[Thu Jun 20 10:52:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:52:04 2013] Updating source flux to 3.4e-13
[Thu Jun 20 10:52:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 10:52:34 2013] xmm0112880701/analysis//spectral/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete