[Thu Jun 20 07:18:10 2013] Detection parameters:
  Position = (244.2, 311.1) = 3 8 37.92 40 57 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.3 +/- 10.1
  Background counts = 18.6
  Rate = 0.001 +/- 0.0003

[Thu Jun 20 07:18:13 2013] Off-axis axis estimate = 4.04'
[Thu Jun 20 07:19:22 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:22 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Thu Jun 20 07:19:22 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Thu Jun 20 07:19:22 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 8.45"
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src40.ximg exists
[Thu Jun 20 07:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src40.csv
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu Jun 20 07:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src40.csv
[Thu Jun 20 07:19:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:24 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu Jun 20 07:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu Jun 20 07:19:24 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu Jun 20 07:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu Jun 20 07:19:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:10 2013] Spatial fit model total counts = 201.155000, observed total counts = 172.000000
[Thu Jun 20 07:20:10 2013] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 07:20:10 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:10 2013] Assessing source extent using major
[Thu Jun 20 07:20:10 2013] Source does appear to be extended
[Thu Jun 20 07:20:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:10 2013] Deleting source due to low Poisson probability 0.9