[Thu Jun 20 07:18:10 2013] Detection parameters:
  Position = (250.6, 332.1) = 3 8 35.45 40 58 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.8 +/- 11.3
  Background counts = 19.7
  Rate = 0.002 +/- 0.0003

[Thu Jun 20 07:18:13 2013] Off-axis axis estimate = 4.24'
[Thu Jun 20 07:19:22 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:22 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Thu Jun 20 07:19:22 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029
[Thu Jun 20 07:19:22 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.55"
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jun 20 07:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src33.csv
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jun 20 07:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src33.csv
[Thu Jun 20 07:19:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:24 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jun 20 07:19:24 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jun 20 07:19:24 2013] Fit fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu Jun 20 07:20:10 2013] Spatial fit model total counts = 263.582000, observed total counts = 266.000000
[Thu Jun 20 07:20:10 2013] Offset between fit and detection position for source 31 = 2.394797 pixels
[Thu Jun 20 07:20:10 2013] 275.008400 total counts/ 85.066400 bgd. counts: snr = 20.594060
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 2.394797 pixels
  Position = (248.3, 332.5) = 3 8 36.36 40 58 34.6
  Extent = 17.1 (17.0-34.2)", rotation angle = 0
  Source counts = 189.9 +/- 16.6
  Background counts = 85.1
  Rate = 0.004 +/- 0.0003
[Thu Jun 20 07:20:10 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:10 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:20:10 2013] Source does appear to be extended
[Thu Jun 20 07:20:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:10 2013] Source is confused with source 30
[Thu Jun 20 07:20:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:53 2013] Initial guess for spatial extent in simple fitting = 17.09"
[Thu Jun 20 07:20:53 2013] source mask rpix=3.9, npix_max = 78, mask sum = 57, frac = 0.726
[Thu Jun 20 07:20:53 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 17.09"
[Thu Jun 20 07:20:55 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src24.ximg exists
[Thu Jun 20 07:20:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src24.csv
[Thu Jun 20 07:20:55 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Jun 20 07:20:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src24.csv
[Thu Jun 20 07:20:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:55 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Jun 20 07:20:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Jun 20 07:20:55 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Jun 20 07:20:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Jun 20 07:20:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:21:29 2013] Warning, spatial fit 24 centroid is now closest to src. 32
[Thu Jun 20 07:21:29 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:29 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:21:29 2013] Source does appear to be extended
[Thu Jun 20 07:21:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 09:52:01 2013] XMMSAS src. selection expression = ellipse(21551.678200, 28875.161600, 1025.664030, 1025.664030, 0.000000, X, Y)
[Thu Jun 20 09:52:01 2013] Not overwriting source region fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_src.reg
[Thu Jun 20 09:52:01 2013] Extracting stamp from image fullrun_mos1_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (189, 274) - (307, 391)
[Thu Jun 20 09:52:01 2013] XMMSAS bgd. selection expression = annulus(21551.678200, 28875.161600, 1709.440049, 3418.880098, X, Y) && !ellipse(22722.807465, 28596.693390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20946.989792, 25637.628723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22405.018000, 28733.694200, 1306.520038, 1306.520038, 0.000000, X, Y) && !ellipse(24127.462000, 28254.600400, 1229.712035, 317.707209, 14.315892, X, Y)
[Thu Jun 20 09:52:01 2013] Writing fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31.gif
[Thu Jun 20 09:52:03 2013] ../../xmm0112880701/products/events/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0112880701/products/events/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Thu Jun 20 09:52:03 2013] Mean detx,y = (359.89, -6015.65) 
[Thu Jun 20 09:52:03 2013] ../../xmm0112880701/products/images/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_src.img and ../../xmm0112880701/products/images/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Thu Jun 20 09:52:03 2013] ../../xmm0112880701/products/spectra/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Thu Jun 20 09:52:03 2013] Setting source spectrum file to fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jun 20 09:52:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Jun 20 09:52:03 2013] ../../xmm0112880701/products/lightcurves/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Thu Jun 20 10:52:01 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:52:01 2013] Total counts from fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 388.00
[Thu Jun 20 10:52:01 2013] Total counts from fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_bgd.pi.gz = 2355.00
[Thu Jun 20 10:52:01 2013] Got source and background scale factors 2526152.000000, 22964245.000000
[Thu Jun 20 10:52:02 2013] User source parameters:
  Position = (248.3, 332.5) = 3 8 36.36 40 58 34.6
  Extent = 17.1 (17.0-34.2)", rotation angle = 0
  Source aperture counts = 128.9 +/- 20.7
  Background aperture counts = 259.1
  Rate = 0.002 +/- 0.0004

[Thu Jun 20 10:52:05 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:52:05 2013] Using photon index=1.80, rate=0.00365, arf fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31.arf
[Thu Jun 20 10:52:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:52:05 2013] Updating source flux to 6e-14
[Thu Jun 20 10:52:21 2013] Flag c found in src. 31 procflags, skipping spectral fitting
[Thu Jun 20 10:52:34 2013] xmm0112880701/analysis//spectral/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete