[Thu Jun 20 07:18:07 2013] Detection parameters:
  Position = (309.1, 337.5) = 3 8 13.00 40 58 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.8 +/- 24.7
  Background counts = 33.8
  Rate = 0.004 +/- 0.0006

[Thu Jun 20 07:18:13 2013] Off-axis axis estimate = 2.93'
[Thu Jun 20 07:19:22 2013] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:22 2013] Initial guess for spatial extent in simple fitting = 7.89"
[Thu Jun 20 07:19:22 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Thu Jun 20 07:19:22 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.89"
[Thu Jun 20 07:19:22 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 20 07:19:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src5.csv
[Thu Jun 20 07:19:22 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 20 07:19:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src5.csv
[Thu Jun 20 07:19:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 20 07:19:23 2013] Fit fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jun 20 07:20:10 2013] Source 3 is offset by -1.763247 and 7.494750 pixels which is larger than
2 X fitted extent = 2.774175 x 2.774175, not incorporating fit results
[Thu Jun 20 07:20:10 2013] Source 3 is offset by 2.549604 and -5.199181 pixels which is larger than
2 X fitted extent = 1.634616 x 1.634616, not incorporating fit results
[Thu Jun 20 07:20:10 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:10 2013] Assessing source extent using major
[Thu Jun 20 07:20:10 2013] Source does appear to be extended
[Thu Jun 20 07:20:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:53 2013] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:53 2013] Initial guess for spatial extent in simple fitting = 7.89"
[Thu Jun 20 07:20:53 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Thu Jun 20 07:20:53 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.89"
[Thu Jun 20 07:20:54 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 20 07:20:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src5.csv
[Thu Jun 20 07:20:54 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 20 07:20:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src5.csv
[Thu Jun 20 07:20:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:55 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 20 07:20:55 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 20 07:20:55 2013] Fit fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jun 20 07:21:29 2013] Source 3 is offset by -2.757316 and 8.762727 pixels which is larger than
2 X fitted extent = 1.471200 x 1.471200, not incorporating fit results
[Thu Jun 20 07:21:29 2013] Source 3 is offset by -1.781964 and 6.491600 pixels which is larger than
2 X fitted extent = 1.841122 x 1.841122, not incorporating fit results
[Thu Jun 20 07:21:29 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:29 2013] Assessing source extent using major
[Thu Jun 20 07:21:29 2013] Source does appear to be extended
[Thu Jun 20 07:21:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 09:52:01 2013] XMMSAS src. selection expression = ellipse(26840.383545, 29310.073212, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 09:52:01 2013] Not overwriting source region fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 20 09:52:01 2013] Extracting stamp from image fullrun_mos1_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (272, 300) - (347, 375)
[Thu Jun 20 09:52:01 2013] XMMSAS bgd. selection expression = annulus(26840.383545, 29310.073212, 1087.500000, 2175.000000, X, Y) && !ellipse(27497.830760, 27390.908740, 2242.238465, 2242.238465, 0.000000, X, Y) && !ellipse(28979.413208, 28781.621490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.922119, 29130.991486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28318.462250, 29088.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31828.616003, 26311.906551, 2845.408082, 416.926542, 16.609599, X, Y) && !ellipse(24127.462000, 28254.600400, 1229.712035, 317.707209, 14.315892, X, Y)
[Thu Jun 20 09:52:01 2013] Writing fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3.gif
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/events/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112880701/products/events/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Jun 20 09:52:02 2013] Mean detx,y = (1907.70, -1247.11) 
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/images/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112880701/products/images/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/spectra/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Jun 20 09:52:02 2013] Setting source spectrum file to fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 20 09:52:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/lightcurves/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Jun 20 10:16:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 10:16:52 2013] rmf not generated due to insufficient counts
[Thu Jun 20 10:51:56 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:51:56 2013] Total counts from fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1206.00
[Thu Jun 20 10:51:56 2013] Total counts from fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1130.00
[Thu Jun 20 10:51:57 2013] Got source and background scale factors 1260604.000000, 5491184.000000
[Thu Jun 20 10:51:57 2013] User source parameters:
  Position = (309.1, 337.5) = 3 8 13.00 40 58 49.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 946.6 +/- 35.7
  Background aperture counts = 259.4
  Rate = 0.02 +/- 0.0007

[Thu Jun 20 10:51:57 2013] Updating counts from extracted products
[Thu Jun 20 10:51:57 2013] Set source signif. to 946.59/16.11 = 58.77
[Thu Jun 20 10:52:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:52:04 2013] Using photon index=1.80, rate=0.0182, arf fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3.arf
[Thu Jun 20 10:52:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:52:04 2013] Updating source flux to 2.4e-13
[Thu Jun 20 10:52:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 10:52:34 2013] xmm0112880701/analysis//spectral/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete