[Thu Jun 20 07:18:09 2013] Detection parameters:
  Position = (258.6, 419.6) = 3 8 32.42 41 4 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.9 +/- 8.4
  Background counts = 12.5
  Rate = 0.0007 +/- 0.0002

[Thu Jun 20 07:18:13 2013] Off-axis axis estimate = 9.25'
[Thu Jun 20 07:19:22 2013] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:22 2013] Initial guess for spatial extent in simple fitting = 11.05"
[Thu Jun 20 07:19:22 2013] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.892
[Thu Jun 20 07:19:22 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 11.05"
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src52.ximg exists
[Thu Jun 20 07:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src52.csv
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src52_1.ximg exists
[Thu Jun 20 07:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src52.csv
[Thu Jun 20 07:19:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:24 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Thu Jun 20 07:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src52.csv
[Thu Jun 20 07:19:24 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Thu Jun 20 07:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src52.csv
[Thu Jun 20 07:19:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:10 2013] Spatial fit model total counts = 171.241000, observed total counts = 141.000000
[Thu Jun 20 07:20:10 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 07:20:10 2013] Source 24 is offset by 1.999813 and 0.180790 pixels which is larger than
2 X fitted extent = 1.324405 x 1.324405, not incorporating fit results
[Thu Jun 20 07:20:10 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:10 2013] Assessing source extent using major
[Thu Jun 20 07:20:10 2013] Source does appear to be extended
[Thu Jun 20 07:20:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:10 2013] Deleting source due to low Poisson probability 0.8