[Thu Jun 20 07:18:08 2013] Detection parameters:
  Position = (445.0, 197.2) = 3 7 20.94 40 48 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.6 +/- 15.3
  Background counts = 11.9
  Rate = 0.003 +/- 0.0003

[Thu Jun 20 07:18:13 2013] Off-axis axis estimate = 12.91'
[Thu Jun 20 07:19:22 2013] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:22 2013] Initial guess for spatial extent in simple fitting = 12.88"
[Thu Jun 20 07:19:22 2013] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.876
[Thu Jun 20 07:19:22 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 12.88"
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src12.ximg exists
[Thu Jun 20 07:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src12.csv
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Jun 20 07:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src12.csv
[Thu Jun 20 07:19:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jun 20 07:19:23 2013] Fit fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Jun 20 07:20:10 2013] Spatial fit model total counts = 473.745000, observed total counts = 470.000000
[Thu Jun 20 07:20:10 2013] Offset between fit and detection position for source 17 = 8.971007 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 8.971007 pixels
  Position = (449.9, 204.7) = 3 7 19.06 40 49 18.2
  Extent = 25.8 (25.7-25.8)", rotation angle = 0
  Source counts = 374.8 +/- 19.4
  Background counts = 0.0
  Rate = 0.007 +/- 0.0004
 Deleting source due to low signal-to-noise ratio