[Thu Jun 20 07:18:07 2013] Detection parameters:
  Position = (316.9, 315.1) = 3 8 10.01 40 57 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 301805.5 +/- 630.0
  Background counts = 45.6
  Rate = 6 +/- 0.01

[Thu Jun 20 07:18:13 2013] Off-axis axis estimate = 1.80'
[Thu Jun 20 07:19:22 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:19:22 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Thu Jun 20 07:19:22 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Thu Jun 20 07:19:22 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Thu Jun 20 07:19:22 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 20 07:19:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src1.csv
[Thu Jun 20 07:19:22 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 20 07:19:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src1.csv
[Thu Jun 20 07:19:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 20 07:19:23 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 20 07:19:23 2013] Fit fullrun_mos1_xmm0112880701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 20 07:20:10 2013] Spatial fit model total counts = 294057.000000, observed total counts = 306257.000000
[Thu Jun 20 07:20:10 2013] Offset between fit and detection position for source 1 = 0.347282 pixels
[Thu Jun 20 07:20:10 2013] 293753.000000 total counts/ 25600.000000 bgd. counts: snr = 1675.956250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.347282 pixels
  Position = (316.6, 315.4) = 3 8 10.10 40 57 20.5
  Extent = 9.3 (9.3-9.4)", rotation angle = 0
  Source counts = 268153.0 +/- 542.0
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Thu Jun 20 07:20:10 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:20:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:20:10 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:20:10 2013] Source does appear to be extended
[Thu Jun 20 07:20:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 07:20:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:20:53 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Thu Jun 20 07:20:53 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.894
[Thu Jun 20 07:20:53 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.33"
[Thu Jun 20 07:20:54 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 20 07:20:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src1.csv
[Thu Jun 20 07:20:54 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 20 07:20:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src1.csv
[Thu Jun 20 07:20:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 07:20:55 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 20 07:20:55 2013] fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 20 07:20:55 2013] Fit fullrun_mos1_xmm0112880701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 20 07:21:29 2013] Spatial fit model total counts = 297784.000000, observed total counts = 310878.000000
[Thu Jun 20 07:21:29 2013] Offset between fit and detection position for source 1 = 0.005831 pixels
[Thu Jun 20 07:21:29 2013] 297541.000000 total counts/ 28900.000000 bgd. counts: snr = 1580.241176
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005831 pixels
  Position = (316.6, 315.4) = 3 8 10.11 40 57 20.5
  Extent = 9.3 (9.3-9.4)", rotation angle = 0
  Source counts = 268641.0 +/- 545.5
  Background counts = 28900.0
  Rate = 5 +/- 0.01
[Thu Jun 20 07:21:29 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 07:21:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 07:21:29 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 07:21:29 2013] Source does appear to be extended
[Thu Jun 20 07:21:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 09:52:01 2013] Counts = 268641.000000, rescaling region sizes by 3.000000
[Thu Jun 20 09:52:01 2013] XMMSAS src. selection expression = ellipse(27497.830760, 27390.908740, 1681.678848, 1681.678848, 0.000000, X, Y)
[Thu Jun 20 09:52:01 2013] Not overwriting source region fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 20 09:52:01 2013] Extracting stamp from image fullrun_mos1_xmm0112880701_pi300-10000_cl_sm2.00.img.gz, (220, 219) - (413, 412)
[Thu Jun 20 09:52:01 2013] XMMSAS bgd. selection expression = annulus(27497.830760, 27390.908740, 8408.394242, 16816.788484, X, Y) && !ellipse(38161.338196, 16300.419037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28979.413208, 28781.621490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.922119, 29130.991486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26840.383545, 29310.073212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28318.462250, 29088.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25976.113098, 18204.644547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32691.701721, 29016.376526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22722.807465, 28596.693390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33132.364899, 29246.291443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20946.989792, 25637.628723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31828.616003, 26311.906551, 2845.408082, 416.926542, 16.609599, X, Y) && !ellipse(32401.776000, 26148.015000, 2845.408082, 384.413611, 17.063000, X, Y) && !ellipse(17081.210960, 21178.675000, 734.909621, 734.909621, 0.000000, X, Y) && !ellipse(12056.012207, 27179.414856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22405.018000, 28733.694200, 1306.520038, 1306.520038, 0.000000, X, Y) && !ellipse(21551.678200, 28875.161600, 1367.552039, 1367.552039, 0.000000, X, Y) && !ellipse(32818.548000, 26024.032000, 1469.200042, 1469.200042, 0.000000, X, Y) && !ellipse(31602.070000, 26294.366000, 1379.808040, 1379.808040, 0.000000, X, Y) && !ellipse(33411.032000, 25832.314000, 1558.976045, 1558.976045, 0.000000, X, Y) && !ellipse(24127.462000, 28254.600400, 1229.712035, 317.707209, 14.315892, X, Y) && !ellipse(31744.830400, 21129.422200, 1385.984040, 905.128026, 10.767662, X, Y)
[Thu Jun 20 09:52:01 2013] Writing fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1.gif
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/events/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112880701/products/events/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Jun 20 09:52:02 2013] Mean detx,y = (406.09, -193.06) 
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/images/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112880701/products/images/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/spectra/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112880701/products/spectra/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Jun 20 09:52:02 2013] Setting source spectrum file to fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 20 09:52:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 20 09:52:02 2013] ../../xmm0112880701/products/lightcurves/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112880701/products/lightcurves/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Jun 20 10:51:55 2013] Updating aperture counts using extracted products
[Thu Jun 20 10:51:55 2013] Total counts from fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 354002.00
[Thu Jun 20 10:51:55 2013] Total counts from fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 41244.00
[Thu Jun 20 10:51:55 2013] Got source and background scale factors 8756876.000000, 604932439.000000
[Thu Jun 20 10:51:55 2013] User source parameters:
  Position = (316.6, 315.4) = 3 8 10.11 40 57 20.5
  Extent = 9.3 (9.3-9.4)", rotation angle = 0
  Source aperture counts = 353405.0 +/- 596.0
  Background aperture counts = 597.0
  Rate = 7 +/- 0.01

[Thu Jun 20 10:52:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 10:52:04 2013] Using photon index=1.80, rate=5.16, arf fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1.arf
[Thu Jun 20 10:52:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 10:52:04 2013] Updating source flux to 5.7e-11
[Thu Jun 20 10:52:34 2013] xmm0112880701/analysis//spectral/fullrun_mos1_xmm0112880701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete