[Sat Jul  7 02:30:27 2012] Detection parameters:
  Position = (316.8, 314.0) = 0 43 35.25 -17 59 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56033.0 +/- 282.8
  Background counts = 7.5
  Rate = 5 +/- 0.02

[Sat Jul  7 02:30:27 2012] Off-axis axis estimate = 1.74'
[Sat Jul  7 06:57:17 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 06:57:17 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Jul  7 06:57:17 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sat Jul  7 06:57:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sat Jul  7 07:15:08 2012] fullrun_mos1_xmm0112880601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul  7 07:15:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880601_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 07:15:08 2012] fullrun_mos1_xmm0112880601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul  7 07:15:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880601_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 07:15:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 07:15:08 2012] fullrun_mos1_xmm0112880601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul  7 07:15:08 2012] fullrun_mos1_xmm0112880601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul  7 07:15:08 2012] Fit fullrun_mos1_xmm0112880601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul  7 08:30:32 2012] Spatial fit model total counts = 53984.900000, observed total counts = 53986.000000
[Sat Jul  7 08:30:32 2012] Offset between fit and detection position for source 1 = 0.226515 pixels
[Sat Jul  7 08:30:32 2012] 53898.100000 total counts/ 11278.400000 bgd. counts: snr = 401.316154
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.226515 pixels
  Position = (316.6, 313.9) = 0 43 35.32 -17 59 12.0
  Extent = 7.2 (7.1-7.2)", rotation angle = 0
  Source counts = 42619.7 +/- 232.2
  Background counts = 11278.4
  Rate = 3 +/- 0.02
[Sat Jul  7 08:30:32 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 08:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 08:30:32 2012] Assessing source extent using major axis lower bound
[Sat Jul  7 08:30:32 2012] Source does appear to be extended
[Sat Jul  7 08:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 09:50:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul  7 09:50:24 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Sat Jul  7 09:50:24 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.083
[Sat Jul  7 09:50:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.17"
[Sat Jul  7 10:03:45 2012] fullrun_mos1_xmm0112880601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul  7 10:03:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880601_pi300-10000_cl_pass1_src1.csv
[Sat Jul  7 10:03:45 2012] fullrun_mos1_xmm0112880601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul  7 10:03:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880601_pi300-10000_cl_pass1_src1.csv
[Sat Jul  7 10:03:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 10:03:45 2012] fullrun_mos1_xmm0112880601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul  7 10:03:45 2012] fullrun_mos1_xmm0112880601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul  7 10:03:45 2012] Fit fullrun_mos1_xmm0112880601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul  7 11:10:18 2012] Spatial fit model total counts = 53964.200000, observed total counts = 53986.000000
[Sat Jul  7 11:10:18 2012] Offset between fit and detection position for source 1 = 0.000818 pixels
[Sat Jul  7 11:10:18 2012] 53878.900000 total counts/ 11293.200000 bgd. counts: snr = 400.733160
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000818 pixels
  Position = (316.6, 313.9) = 0 43 35.32 -17 59 12.0
  Extent = 7.2 (7.1-7.2)", rotation angle = 0
  Source counts = 42585.7 +/- 232.1
  Background counts = 11293.2
  Rate = 3 +/- 0.02
[Sat Jul  7 11:10:18 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 11:10:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 11:10:18 2012] Assessing source extent using major axis lower bound
[Sat Jul  7 11:10:18 2012] Source does appear to be extended
[Sat Jul  7 11:10:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 23:05:46 2012] Counts = 42585.700000, rescaling region sizes by 3.000000
[Sat Jul  7 23:05:46 2012] XMMSAS src. selection expression = ellipse(27496.373600, 27261.862000, 1292.047237, 1292.047237, 0.000000, X, Y)
[Sat Jul  7 23:05:46 2012] Writing source region out to fullrun_mos1_xmm0112880601_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul  7 23:05:46 2012] Extracting stamp from image fullrun_mos1_xmm0112880601_pi300-10000_cl_sm2.00.img.gz, (242, 240) - (391, 388)
[Sat Jul  7 23:05:46 2012] XMMSAS bgd. selection expression = annulus(27496.373600, 27261.862000, 6460.236186, 12920.472372, X, Y) && !ellipse(26277.912000, 25250.900000, 1023.243630, 1023.243630, 0.000000, X, Y) && !ellipse(28975.128000, 27590.430000, 1285.944037, 1285.944037, 0.000000, X, Y)
[Sat Jul  7 23:05:46 2012] Writing fullrun_mos1_xmm0112880601_pi300-10000_pass1_cl_src1.gif
[Sat Jul  7 23:05:51 2012] Mean detx,y = (355.40, -269.34) 
[Sat Jul  7 23:05:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul  7 23:10:28 2012] Binned source spectrum to 10 counts/bin
[Sat Jul  7 23:10:28 2012] Setting source spectrum file to fullrun_mos1_xmm0112880601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul  7 23:10:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112880601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul  7 23:39:17 2012] Updating aperture counts using extracted products
[Sat Jul  7 23:39:17 2012] Error reading totcts from fullrun_mos1_xmm0112880601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul  7 23:39:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul  7 23:39:17 2012] Using photon index=1.80, rate=3.41, arf fullrun_mos1_xmm0112880601_pi300-10000_pass1_cl_src1.arf
[Sat Jul  7 23:39:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  7 23:39:17 2012] Updating source flux to 3.7e-11
[Sat Jul  7 23:39:59 2012] Reading fit data from xmm0112880601/analysis//spectral/fullrun_mos1_xmm0112880601_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul  7 23:39:59 2012] Spectral fit parameter nH value = 7.54372e+21
[Sat Jul  7 23:39:59 2012] Spectral fit parameter PhoIndex value = 6.99101
[Sat Jul  7 23:39:59 2012] Failed to get F(0.3-8.0) from xmm0112880601/analysis//spectral/fullrun_mos1_xmm0112880601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul  7 23:39:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul  7 23:39:59 2012] Using Nh = 7.5e+21, photon index=6.99, rate=3.41, arf fullrun_mos1_xmm0112880601_pi300-10000_pass1_cl_src1.arf
[Sat Jul  7 23:39:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  7 23:39:59 2012] Updating source flux to 2.2e-11