[Thu May 24 16:04:08 2012] Detection parameters:
  Position = (278.1, 220.1) = 3 33 7.91 -9 34 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.4 +/- 14.5
  Background counts = 13.0
  Rate = 0.02 +/- 0.002

[Thu May 24 16:04:08 2012] Off-axis axis estimate = 5.87'
[Thu May 24 16:05:54 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Thu May 24 16:05:54 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Thu May 24 16:05:54 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.279
[Thu May 24 16:05:54 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.36"
[Thu May 24 19:39:45 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_src37.ximg exists
[Thu May 24 19:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_src37.csv
[Thu May 24 19:39:45 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu May 24 19:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_src37.csv
[Thu May 24 19:39:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 19:39:46 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu May 24 19:39:46 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu May 24 19:39:46 2012] Fit fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu May 24 21:21:28 2012] Spatial fit model total counts = 457.325000, observed total counts = 458.000000
[Thu May 24 21:21:28 2012] Offset between fit and detection position for source 37 = 6.254140 pixels
[Thu May 24 21:21:28 2012] 413.025300 total counts/ 67.699300 bgd. counts: snr = 41.969828
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 6.254140 pixels
  Position = (280.7, 225.8) = 3 33 7.15 -9 33 40.8
  Extent = 18.5 (18.0-18.7)", rotation angle = 0
  Source counts = 345.3 +/- 20.3
  Background counts = 67.7
  Rate = 0.03 +/- 0.002
[Thu May 24 21:21:28 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:21:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:21:28 2012] Assessing source extent using major axis lower bound
[Thu May 24 21:21:28 2012] Source does appear to be extended
[Thu May 24 21:21:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 21:21:28 2012] Source is confused with source 38
[Thu May 24 21:21:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 21:21:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 21:21:42 2012] Initial guess for spatial extent in simple fitting = 18.47"
[Thu May 24 21:21:42 2012] source mask rpix=4.2, npix_max = 90, mask sum = 90, frac = 0.999
[Thu May 24 21:21:42 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 18.47"
[Thu May 24 23:33:05 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src29.ximg exists
[Thu May 24 23:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src29.csv
[Thu May 24 23:33:05 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu May 24 23:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src29.csv
[Thu May 24 23:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 23:33:06 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu May 24 23:33:06 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu May 24 23:33:06 2012] Fit fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri May 25 00:28:35 2012] Warning, spatial fit 29 centroid is now closest to src. 36
[Fri May 25 00:28:36 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:28:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:28:36 2012] Assessing source extent using major axis lower bound
[Fri May 25 00:28:36 2012] Source does appear to be extended
[Fri May 25 00:28:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 00:28:48 2012] XMMSAS src. selection expression = ellipse(24375.632000, 19594.058000, 1108.122032, 1108.122032, 0.000000, X, Y)
[Fri May 25 00:28:48 2012] Writing source region out to fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src37_src.reg
[Fri May 25 00:28:48 2012] Extracting stamp from image fullrun_pn_xmm0112880501_pi300-10000_cl_sm2.00.img.gz, (217, 162) - (344, 289)
[Fri May 25 00:28:48 2012] XMMSAS bgd. selection expression = annulus(24375.632000, 19594.058000, 1846.870053, 3693.740106, X, Y) && !ellipse(26265.616000, 23897.008000, 1142.656033, 1142.656033, 0.000000, X, Y) && !ellipse(26105.766200, 23471.155600, 1199.312035, 341.332010, 115.594000, X, Y) && !ellipse(25799.172600, 22795.920000, 1355.088039, 506.127215, 115.992464, X, Y) && !ellipse(21910.833130, 23095.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.769040, 22338.794800, 626.329618, 626.329618, 0.000000, X, Y) && !ellipse(21996.645004, 21613.714111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21082.394958, 20930.474182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.042000, 21156.404000, 1225.048035, 1225.048035, 0.000000, X, Y) && !ellipse(24729.134000, 20293.586000, 2320.920067, 2320.920067, 0.000000, X, Y) && !ellipse(23994.920000, 18723.922000, 1267.480036, 1267.480036, 0.000000, X, Y) && !ellipse(23645.922000, 17988.248000, 1764.480051, 1764.480051, 0.000000, X, Y) && !ellipse(23416.361709, 17537.618009, 1598.928046, 506.210097, 114.187978, X, Y) && !ellipse(23290.988282, 17274.795296, 1682.096048, 461.545603, 118.729282, X, Y) && !ellipse(23017.070600, 16684.924440, 2123.592061, 472.449614, 294.317000, X, Y) && !ellipse(22863.012000, 16425.932000, 2191.536063, 1297.680037, 90.000000, X, Y) && !ellipse(22585.928400, 15761.643200, 1746.480050, 445.052813, 296.650800, X, Y) && !ellipse(22295.424800, 15141.991600, 1827.864053, 424.707212, 295.878000, X, Y) && !ellipse(22017.054600, 14536.997600, 1827.864053, 469.364814, 295.932000, X, Y) && !ellipse(21937.298000, 14559.384000, 1996.480057, 1996.480057, 0.000000, X, Y)
[Fri May 25 00:28:48 2012] Writing fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src37.gif
[Fri May 25 00:46:12 2012] Mean detx,y = (167.87, 7906.80) 
[Fri May 25 00:46:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 00:47:00 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 00:47:00 2012] Setting source spectrum file to fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Fri May 25 00:47:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Fri May 25 02:56:23 2012] Updating aperture counts using extracted products
[Fri May 25 02:56:23 2012] Error reading totcts from fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Fri May 25 02:56:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 02:56:24 2012] Using photon index=1.80, rate=0.0299, arf fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src37.arf
[Fri May 25 02:56:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 02:56:24 2012] Updating source flux to 1.4e-13
[Fri May 25 02:57:01 2012] Flag c found in src. 37 procflags, skipping spectral fitting