[Thu May 24 16:04:08 2012] Detection parameters:
  Position = (283.1, 232.0) = 3 33 6.46 -9 33 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.8 +/- 14.7
  Background counts = 13.7
  Rate = 0.01 +/- 0.002

[Thu May 24 16:04:08 2012] Off-axis axis estimate = 4.94'
[Thu May 24 16:05:54 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu May 24 16:05:54 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Thu May 24 16:05:54 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.157
[Thu May 24 16:05:54 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 8.90"
[Thu May 24 19:39:45 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_src36.ximg exists
[Thu May 24 19:39:45 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu May 24 19:39:45 2012] Fit fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_src36 appears to have run properly
[Thu May 24 19:39:46 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu May 24 19:39:46 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu May 24 19:39:46 2012] Fit fullrun_pn_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Thu May 24 21:21:28 2012] Spatial fit model total counts = 447.914000, observed total counts = 445.000000
[Thu May 24 21:21:28 2012] Offset between fit and detection position for source 36 = 7.708091 pixels
[Thu May 24 21:21:28 2012] 396.578600 total counts/ 70.647600 bgd. counts: snr = 38.777246
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 7.708091 pixels
  Position = (286.6, 238.9) = 3 33 5.42 -9 32 43.8
  Extent = 17.8 (17.8-17.8)", rotation angle = 0
  Source counts = 325.9 +/- 19.9
  Background counts = 70.6
  Rate = 0.03 +/- 0.002
[Thu May 24 21:21:28 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:21:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:21:28 2012] Assessing source extent using major axis lower bound
[Thu May 24 21:21:28 2012] Source does appear to be extended
[Thu May 24 21:21:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 21:21:28 2012] Source is confused with source 35
[Thu May 24 21:21:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 21:21:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 21:21:42 2012] Initial guess for spatial extent in simple fitting = 17.79"
[Thu May 24 21:21:42 2012] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.961
[Thu May 24 21:21:42 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 17.79"
[Thu May 24 23:33:05 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src28.ximg exists
[Thu May 24 23:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src28.csv
[Thu May 24 23:33:05 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu May 24 23:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src28.csv
[Thu May 24 23:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 23:33:06 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu May 24 23:33:06 2012] fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu May 24 23:33:06 2012] Fit fullrun_pn_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri May 25 00:28:35 2012] Warning, spatial fit 28 centroid is now closest to src. 35
[Fri May 25 00:28:35 2012] Spatial fit model total counts = 796.220000, observed total counts = 798.000000
[Fri May 25 00:28:35 2012] Offset between fit and detection position for source 36 = 5.364186 pixels
[Fri May 25 00:28:35 2012] Warning, changing simple spatial fit ID from 28 to 29
[Fri May 25 00:28:35 2012] 748.047000 total counts/ 166.375000 bgd. counts: snr = 45.095595
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 5.364186 pixels
  Position = (284.8, 233.8) = 3 33 5.95 -9 33 5.8
  Extent = 29.0 (25.7-34.9)", rotation angle = 0
  Source counts = 581.7 +/- 27.4
  Background counts = 166.4
  Rate = 0.05 +/- 0.002
[Fri May 25 00:28:36 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:28:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:28:36 2012] Assessing source extent using major axis lower bound
[Fri May 25 00:28:36 2012] Source does appear to be extended
[Fri May 25 00:28:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 00:28:48 2012] XMMSAS src. selection expression = ellipse(24729.134000, 20293.586000, 1740.690050, 1740.690050, 0.000000, X, Y)
[Fri May 25 00:28:48 2012] Writing source region out to fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src36_src.reg
[Fri May 25 00:28:48 2012] Extracting stamp from image fullrun_pn_xmm0112880501_pi300-10000_cl_sm2.00.img.gz, (185, 134) - (385, 334)
[Fri May 25 00:28:48 2012] XMMSAS bgd. selection expression = annulus(24729.134000, 20293.586000, 2901.150083, 5802.300167, X, Y) && !ellipse(27735.238600, 26994.210800, 1451.253642, 1451.253642, 0.000000, X, Y) && !ellipse(30298.453003, 25980.472656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22614.137150, 24569.750600, 377.212011, 377.212011, 0.000000, X, Y) && !ellipse(26523.054443, 24315.665741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26265.616000, 23897.008000, 1142.656033, 1142.656033, 0.000000, X, Y) && !ellipse(26105.766200, 23471.155600, 1199.312035, 341.332010, 115.594000, X, Y) && !ellipse(25799.172600, 22795.920000, 1355.088039, 506.127215, 115.992464, X, Y) && !ellipse(21910.833130, 23095.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.769040, 22338.794800, 626.329618, 626.329618, 0.000000, X, Y) && !ellipse(21996.645004, 21613.714111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21082.394958, 20930.474182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.042000, 21156.404000, 1225.048035, 1225.048035, 0.000000, X, Y) && !ellipse(24375.632000, 19594.058000, 1477.496043, 1477.496043, 0.000000, X, Y) && !ellipse(23994.920000, 18723.922000, 1267.480036, 1267.480036, 0.000000, X, Y) && !ellipse(23645.922000, 17988.248000, 1764.480051, 1764.480051, 0.000000, X, Y) && !ellipse(23416.361709, 17537.618009, 1598.928046, 506.210097, 114.187978, X, Y) && !ellipse(23290.988282, 17274.795296, 1682.096048, 461.545603, 118.729282, X, Y) && !ellipse(23017.070600, 16684.924440, 2123.592061, 472.449614, 294.317000, X, Y) && !ellipse(22863.012000, 16425.932000, 2191.536063, 1297.680037, 90.000000, X, Y) && !ellipse(22585.928400, 15761.643200, 1746.480050, 445.052813, 296.650800, X, Y) && !ellipse(22295.424800, 15141.991600, 1827.864053, 424.707212, 295.878000, X, Y) && !ellipse(22017.054600, 14536.997600, 1827.864053, 469.364814, 295.932000, X, Y) && !ellipse(21937.298000, 14559.384000, 1996.480057, 1996.480057, 0.000000, X, Y)
[Fri May 25 00:28:48 2012] Writing fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src36.gif
[Fri May 25 00:44:46 2012] Mean detx,y = (187.87, 7026.20) 
[Fri May 25 00:44:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 00:46:03 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 00:46:03 2012] Setting source spectrum file to fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri May 25 00:46:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Fri May 25 02:56:23 2012] Updating aperture counts using extracted products
[Fri May 25 02:56:23 2012] Error reading totcts from fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri May 25 02:56:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 02:56:24 2012] Using photon index=1.80, rate=0.0504, arf fullrun_pn_xmm0112880501_pi300-10000_pass1_cl_src36.arf
[Fri May 25 02:56:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 02:56:24 2012] Updating source flux to 2e-13
[Fri May 25 02:57:01 2012] Flag c found in src. 36 procflags, skipping spectral fitting