[Thu May 24 16:04:52 2012] Detection parameters:
  Position = (282.3, 341.8) = 3 33 6.68 -9 25 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.1 +/- 14.6
  Background counts = 4.8
  Rate = 0.01 +/- 0.001

[Thu May 24 16:04:52 2012] Off-axis axis estimate = 3.35'
[Thu May 24 20:04:18 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Thu May 24 20:04:18 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Thu May 24 20:04:18 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.119
[Thu May 24 20:04:18 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.10"
[Thu May 24 21:21:18 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 24 21:21:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src2.csv
[Thu May 24 21:21:18 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 24 21:21:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src2.csv
[Thu May 24 21:21:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:21:18 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 24 21:21:18 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 24 21:21:18 2012] Fit fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May 24 21:21:34 2012] Spatial fit model total counts = 172.534000, observed total counts = 173.000000
[Thu May 24 21:21:34 2012] Offset between fit and detection position for source 5 = 0.191612 pixels
[Thu May 24 21:21:34 2012] 172.831600 total counts/ 78.742100 bgd. counts: snr = 10.603217
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.191612 pixels
  Position = (282.2, 341.6) = 3 33 6.72 -9 25 16.9
  Extent = 5.2 (4.2-6.4)", rotation angle = 0
  Source counts = 94.1 +/- 13.1
  Background counts = 78.7
  Rate = 0.007 +/- 0.001
[Thu May 24 21:21:34 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:21:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:21:34 2012] Assessing source extent using major axis lower bound
[Thu May 24 21:21:34 2012] Source does appear to be extended
[Thu May 24 21:21:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 23:48:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 23:48:26 2012] Initial guess for spatial extent in simple fitting = 5.22"
[Thu May 24 23:48:26 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.037
[Thu May 24 23:48:26 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.22"
[Fri May 25 00:28:27 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 25 00:28:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src2.csv
[Fri May 25 00:28:27 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 25 00:28:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src2.csv
[Fri May 25 00:28:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 00:28:27 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 25 00:28:27 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 25 00:28:27 2012] Fit fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri May 25 00:28:39 2012] Spatial fit model total counts = 172.534000, observed total counts = 173.000000
[Fri May 25 00:28:39 2012] Offset between fit and detection position for source 5 = 0.000005 pixels
[Fri May 25 00:28:39 2012] 172.832000 total counts/ 78.742000 bgd. counts: snr = 10.603280
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000005 pixels
  Position = (282.2, 341.6) = 3 33 6.72 -9 25 16.9
  Extent = 5.2 (4.2-6.4)", rotation angle = 0
  Source counts = 94.1 +/- 13.1
  Background counts = 78.7
  Rate = 0.007 +/- 0.001
[Fri May 25 00:28:39 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:28:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:28:39 2012] Assessing source extent using major axis lower bound
[Fri May 25 00:28:39 2012] Source does appear to be extended
[Fri May 25 00:28:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 02:46:09 2012] XMMSAS src. selection expression = ellipse(24502.132780, 29672.412600, 313.369209, 313.369209, 0.000000, X, Y)
[Fri May 25 02:46:09 2012] Writing source region out to fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src5_src.reg
[Fri May 25 02:46:09 2012] Extracting stamp from image fullrun_mos2_xmm0112880501_pi300-10000_cl_sm2.00.img.gz, (264, 324) - (300, 360)
[Fri May 25 02:46:09 2012] XMMSAS bgd. selection expression = annulus(24502.132780, 29672.412600, 522.282015, 1044.564030, X, Y)
[Fri May 25 02:46:09 2012] Writing fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src5.gif
[Fri May 25 02:49:26 2012] Mean detx,y = (4061.48, 1166.46) 
[Fri May 25 02:49:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 02:49:34 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 02:49:34 2012] Setting source spectrum file to fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May 25 02:49:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri May 25 02:55:16 2012] Not generating rmf since there are only 94 counts
[Fri May 25 02:55:16 2012] rmf not generated due to insufficient counts
[Fri May 25 02:56:24 2012] Updating aperture counts using extracted products
[Fri May 25 02:56:24 2012] Error reading totcts from fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May 25 02:56:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 02:56:24 2012] Using photon index=1.80, rate=0.00715, arf fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src5.arf
[Fri May 25 02:56:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 02:56:24 2012] Updating source flux to 1.3e-13
[Fri May 25 02:56:43 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting