[Thu May 24 16:04:52 2012] Detection parameters:
  Position = (319.5, 310.9) = 3 32 55.75 -9 27 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17192.8 +/- 154.7
  Background counts = 5.5
  Rate = 1 +/- 0.01

[Thu May 24 16:04:52 2012] Off-axis axis estimate = 1.77'
[Thu May 24 20:04:18 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu May 24 20:04:18 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu May 24 20:04:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Thu May 24 20:04:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Thu May 24 21:21:18 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 24 21:21:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src1.csv
[Thu May 24 21:21:18 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 24 21:21:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src1.csv
[Thu May 24 21:21:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:21:18 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 21:21:18 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 21:21:18 2012] Fit fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 21:21:34 2012] Spatial fit model total counts = 15941.900000, observed total counts = 15444.000000
[Thu May 24 21:21:34 2012] Offset between fit and detection position for source 3 = 0.215105 pixels
[Thu May 24 21:21:34 2012] 15943.680000 total counts/ 3828.180000 bgd. counts: snr = 195.814644
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.215105 pixels
  Position = (319.3, 310.7) = 3 32 55.80 -9 27 31.3
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 12115.5 +/- 126.3
  Background counts = 3828.2
  Rate = 0.9 +/- 0.01
[Thu May 24 21:21:34 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:21:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:21:34 2012] Assessing source extent using major axis lower bound
[Thu May 24 21:21:34 2012] Source does appear to be extended
[Thu May 24 21:21:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 23:48:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 23:48:26 2012] Initial guess for spatial extent in simple fitting = 5.74"
[Thu May 24 23:48:26 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.208
[Thu May 24 23:48:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.74"
[Fri May 25 00:28:27 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 25 00:28:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src1.csv
[Fri May 25 00:28:27 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 25 00:28:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src1.csv
[Fri May 25 00:28:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 00:28:27 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 25 00:28:27 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 25 00:28:27 2012] Fit fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 25 00:28:39 2012] Spatial fit model total counts = 15876.200000, observed total counts = 15461.000000
[Fri May 25 00:28:39 2012] Offset between fit and detection position for source 3 = 0.018148 pixels
[Fri May 25 00:28:39 2012] 15968.160000 total counts/ 3784.560000 bgd. counts: snr = 198.046848
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.018148 pixels
  Position = (319.3, 310.7) = 3 32 55.80 -9 27 31.3
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 12183.6 +/- 126.4
  Background counts = 3784.6
  Rate = 0.9 +/- 0.01
[Fri May 25 00:28:39 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:28:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:28:39 2012] Assessing source extent using major axis lower bound
[Fri May 25 00:28:39 2012] Source does appear to be extended
[Fri May 25 00:28:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 02:46:09 2012] Counts = 12183.600000, rescaling region sizes by 3.000000
[Fri May 25 02:46:09 2012] XMMSAS src. selection expression = ellipse(27732.236400, 26982.539800, 1043.114430, 1043.114430, 0.000000, X, Y)
[Fri May 25 02:46:09 2012] Writing source region out to fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src3_src.reg
[Fri May 25 02:46:09 2012] Extracting stamp from image fullrun_mos2_xmm0112880501_pi300-10000_cl_sm2.00.img.gz, (259, 251) - (379, 371)
[Fri May 25 02:46:09 2012] XMMSAS bgd. selection expression = annulus(27732.236400, 26982.539800, 5215.572150, 10431.144300, X, Y) && !ellipse(24502.132780, 29672.412600, 417.825612, 417.825612, 0.000000, X, Y) && !ellipse(21119.378189, 21001.542679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25125.850586, 21038.872391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30322.528500, 25931.047600, 418.523212, 418.523212, 0.000000, X, Y) && !ellipse(28132.846497, 26038.681519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30657.381400, 37316.533000, 773.428022, 773.428022, 0.000000, X, Y) && !ellipse(28532.709839, 26460.308136, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 02:46:09 2012] Writing fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src3.gif
[Fri May 25 02:46:12 2012] Mean detx,y = (5.38, 105.10) 
[Fri May 25 02:46:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 02:49:24 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 02:49:24 2012] Setting source spectrum file to fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 25 02:49:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 25 02:56:24 2012] Updating aperture counts using extracted products
[Fri May 25 02:56:24 2012] Error reading totcts from fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 25 02:56:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 02:56:24 2012] Using photon index=1.80, rate=0.925, arf fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src3.arf
[Fri May 25 02:56:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 02:56:24 2012] Updating source flux to 1.1e-11
[Fri May 25 02:57:01 2012] Reading fit data from xmm0112880501/analysis//spectral/fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src3_pl.csv
[Fri May 25 02:57:01 2012] Spectral fit parameter nH value = 6.70546e+21
[Fri May 25 02:57:01 2012] Spectral fit parameter PhoIndex value = 7.95054
[Fri May 25 02:57:01 2012] Failed to get F(0.3-8.0) from xmm0112880501/analysis//spectral/fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri May 25 02:57:01 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 02:57:01 2012] Using Nh = 6.7e+21, photon index=7.95, rate=0.925, arf fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src3.arf
[Fri May 25 02:57:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 02:57:01 2012] Updating source flux to 7.1e-12