[Thu May 24 16:04:52 2012] Detection parameters:
  Position = (328.5, 304.7) = 3 32 53.09 -9 28 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.3 +/- 12.4
  Background counts = 5.2
  Rate = 0.004 +/- 0.001

[Thu May 24 16:04:52 2012] Off-axis axis estimate = 2.23'
[Thu May 24 20:04:18 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Thu May 24 20:04:18 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Thu May 24 20:04:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 24, frac = 1.202
[Thu May 24 20:04:18 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.54"
[Thu May 24 21:21:18 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src13.ximg exists
[Thu May 24 21:21:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src13.csv
[Thu May 24 21:21:18 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu May 24 21:21:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src13.csv
[Thu May 24 21:21:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:21:19 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu May 24 21:21:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu May 24 21:21:19 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu May 24 21:21:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu May 24 21:21:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880501_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:21:34 2012] Source 14 is offset by 7.455240 and -6.002113 pixels which is larger than
2 X fitted extent = 2.392920 x 2.392920, not incorporating fit results
[Thu May 24 21:21:34 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:21:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:21:34 2012] Assessing source extent using major
[Thu May 24 21:21:34 2012] Source does appear to be extended
[Thu May 24 21:21:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 21:21:34 2012] Source is confused with source 16
[Thu May 24 23:48:26 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Thu May 24 23:48:26 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Thu May 24 23:48:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 24, frac = 1.202
[Thu May 24 23:48:26 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.54"
[Fri May 25 00:28:27 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src13.ximg exists
[Fri May 25 00:28:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src13.csv
[Fri May 25 00:28:27 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May 25 00:28:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src13.csv
[Fri May 25 00:28:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 00:28:28 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May 25 00:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 25 00:28:28 2012] fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 25 00:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 25 00:28:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880501_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 00:28:39 2012] Source 14 is offset by 7.455240 and -6.015332 pixels which is larger than
2 X fitted extent = 2.282253 x 2.282253, not incorporating fit results
[Fri May 25 00:28:39 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:28:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:28:39 2012] Assessing source extent using major
[Fri May 25 00:28:39 2012] Source does appear to be extended
[Fri May 25 00:28:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 02:46:09 2012] XMMSAS src. selection expression = ellipse(28532.709839, 26460.308136, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 02:46:09 2012] Writing source region out to fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src14_src.reg
[Fri May 25 02:46:09 2012] Extracting stamp from image fullrun_mos2_xmm0112880501_pi300-10000_cl_sm2.00.img.gz, (291, 267) - (366, 342)
[Fri May 25 02:46:09 2012] XMMSAS bgd. selection expression = annulus(28532.709839, 26460.308136, 1087.500000, 2175.000000, X, Y) && !ellipse(27732.236400, 26982.539800, 1390.819240, 1390.819240, 0.000000, X, Y) && !ellipse(30322.528500, 25931.047600, 418.523212, 418.523212, 0.000000, X, Y) && !ellipse(28132.846497, 26038.681519, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 02:46:09 2012] Writing fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src14.gif
[Fri May 25 02:51:34 2012] Mean detx,y = (-674.25, -31.67) 
[Fri May 25 02:51:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 02:51:43 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 02:51:43 2012] Setting source spectrum file to fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri May 25 02:51:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri May 25 02:55:57 2012] Not generating rmf since there are only 50 counts
[Fri May 25 02:55:57 2012] rmf not generated due to insufficient counts
[Fri May 25 02:56:24 2012] Updating aperture counts using extracted products
[Fri May 25 02:56:24 2012] Error reading totcts from fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri May 25 02:56:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 02:56:24 2012] Using photon index=1.80, rate=0.00405, arf fullrun_mos2_xmm0112880501_pi300-10000_pass1_cl_src14.arf
[Fri May 25 02:56:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 02:56:24 2012] Updating source flux to 4.8e-14
[Fri May 25 02:56:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting