[Thu May  9 20:10:57 2013] Detection parameters:
  Position = (262.3, 356.2) = 4 59 41.33 1 52 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.0 +/- 6.7
  Background counts = 5.2
  Rate = 0.002 +/- 0.0005

[Thu May  9 20:10:57 2013] Off-axis axis estimate = 4.94'
[Thu May  9 20:11:23 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu May  9 20:11:23 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Thu May  9 20:11:23 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.964
[Thu May  9 20:11:23 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.90"
[Thu May  9 20:11:24 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src20.ximg exists
[Thu May  9 20:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src20.csv
[Thu May  9 20:11:24 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu May  9 20:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src20.csv
[Thu May  9 20:11:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:11:24 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu May  9 20:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu May  9 20:11:24 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu May  9 20:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu May  9 20:11:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:11:46 2013] Spatial fit model total counts = 77.418900, observed total counts = 63.000000
[Thu May  9 20:11:46 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  9 20:11:46 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:11:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:11:46 2013] Assessing source extent using major
[Thu May  9 20:11:46 2013] Source does appear to be extended
[Thu May  9 20:11:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 20:11:59 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu May  9 20:11:59 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Thu May  9 20:11:59 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.964
[Thu May  9 20:11:59 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.90"
[Thu May  9 20:11:59 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_src19.ximg exists
[Thu May  9 20:11:59 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu May  9 20:11:59 2013] Fit fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_src19 appears to have run properly
[Thu May  9 20:11:59 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu May  9 20:11:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu May  9 20:11:59 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu May  9 20:11:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu May  9 20:11:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:12:12 2013] Spatial fit model total counts = 58.513800, observed total counts = 63.000000
[Thu May  9 20:12:12 2013] Offset between fit and detection position for source 21 = 0.162207 pixels
[Thu May  9 20:12:12 2013] 58.044300 total counts/ 37.672800 bgd. counts: snr = 3.319014
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.162207 pixels
  Position = (262.4, 356.1) = 4 59 41.32 1 52 36.8
  Extent = 5.0" x 5.0", rotation angle = 0
  Source counts = 20.4 +/- 7.6
  Background counts = 37.7
  Rate = 0.001 +/- 0.0004
[Thu May  9 20:12:12 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:12:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:12:12 2013] Assessing source extent using major
[Thu May  9 20:12:12 2013] Source does appear to be extended
[Thu May  9 20:12:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 20:12:38 2013] XMMSAS src. selection expression = ellipse(22780.676200, 30931.017800, 300.440409, 300.440409, 0.000000, X, Y)
[Thu May  9 20:12:38 2013] Not overwriting source region fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_src.reg
[Thu May  9 20:12:38 2013] Extracting stamp from image fullrun_mos2_xmm0112880401_pi300-10000_cl_sm2.00.img.gz, (245, 339) - (280, 373)
[Thu May  9 20:12:38 2013] XMMSAS bgd. selection expression = annulus(22780.676200, 30931.017800, 500.734014, 1001.468029, X, Y) && !ellipse(23614.048044, 30296.903200, 550.047216, 169.867205, 196.573000, X, Y)
[Thu May  9 20:12:38 2013] Writing fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21.gif
[Thu May  9 20:12:39 2013] ../../xmm0112880401/products/events/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0112880401/products/events/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Thu May  9 20:12:39 2013] Mean detx,y = (-2428.46, -6330.50) 
[Thu May  9 20:12:39 2013] ../../xmm0112880401/products/images/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_src.img and ../../xmm0112880401/products/images/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Thu May  9 20:12:39 2013] ../../xmm0112880401/products/spectra/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_src.pi and ../../xmm0112880401/products/spectra/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Thu May  9 20:12:39 2013] Setting source spectrum file to fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_src.pi.gz
[Thu May  9 20:12:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu May  9 20:12:39 2013] ../../xmm0112880401/products/lightcurves/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0112880401/products/lightcurves/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Thu May  9 20:13:41 2013] Not generating rmf since there are only 20 counts
[Thu May  9 20:13:41 2013] rmf not generated due to insufficient counts
[Thu May  9 20:14:46 2013] Updating aperture counts using extracted products
[Thu May  9 20:14:46 2013] Total counts from fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_src.pi.gz = 26.00
[Thu May  9 20:14:46 2013] Total counts from fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_bgd.pi.gz = 48.00
[Thu May  9 20:14:46 2013] Got source and background scale factors 277876.000000, 1908482.000000
[Thu May  9 20:14:46 2013] User source parameters:
  Position = (262.4, 356.1) = 4 59 41.32 1 52 36.8
  Extent = 5.0" x 5.0", rotation angle = 0
  Source aperture counts = 19.0 +/- 6.2
  Background aperture counts = 7.0
  Rate = 0.001 +/- 0.0003

[Thu May  9 20:14:47 2013] No arf file for this source, not re-computing flux
[Thu May  9 20:14:50 2013] Flag p found in src. 21 procflags, skipping spectral fitting
[Thu May  9 20:14:50 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 20:14:51 2013] xmm0112880401/analysis//spectral/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete