[Thu May  9 20:10:56 2013] Detection parameters:
  Position = (157.6, 179.8) = 5 0 11.71 1 39 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.1 +/- 14.1
  Background counts = 3.7
  Rate = 0.007 +/- 0.0007

[Thu May  9 20:10:57 2013] Off-axis axis estimate = 13.35'
[Thu May  9 20:11:23 2013] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Thu May  9 20:11:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 20:11:23 2013] Initial guess for spatial extent in simple fitting = 13.10"
[Thu May  9 20:11:23 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.993
[Thu May  9 20:11:23 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 13.10"
[Thu May  9 20:11:24 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src3.ximg exists
[Thu May  9 20:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src3.csv
[Thu May  9 20:11:24 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May  9 20:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src3.csv
[Thu May  9 20:11:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:11:24 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May  9 20:11:24 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May  9 20:11:24 2013] Fit fullrun_mos2_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May  9 20:11:46 2013] Spatial fit model total counts = 157.995000, observed total counts = 158.000000
[Thu May  9 20:11:46 2013] Offset between fit and detection position for source 1 = 0.225102 pixels
[Thu May  9 20:11:46 2013] 160.630900 total counts/ 80.287100 bgd. counts: snr = 8.966635
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.225102 pixels
  Position = (157.8, 179.7) = 5 0 11.65 1 39 49.6
  Extent = 5.1 (4.0-6.4)", rotation angle = 0
  Source counts = 80.3 +/- 12.7
  Background counts = 80.3
  Rate = 0.004 +/- 0.0007
[Thu May  9 20:11:46 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:11:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:11:46 2013] Assessing source extent using major axis lower bound
[Thu May  9 20:11:46 2013] Source does appear to be extended
[Thu May  9 20:11:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 20:11:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 20:11:59 2013] Initial guess for spatial extent in simple fitting = 5.12"
[Thu May  9 20:11:59 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.066
[Thu May  9 20:11:59 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 5.12"
[Thu May  9 20:11:59 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_src3.ximg exists
[Thu May  9 20:11:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_src3.csv
[Thu May  9 20:11:59 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May  9 20:11:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_src3.csv
[Thu May  9 20:11:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:11:59 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May  9 20:11:59 2013] fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May  9 20:11:59 2013] Fit fullrun_mos2_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May  9 20:12:12 2013] Spatial fit model total counts = 144.997000, observed total counts = 145.000000
[Thu May  9 20:12:12 2013] Offset between fit and detection position for source 1 = 0.003827 pixels
[Thu May  9 20:12:12 2013] 146.895500 total counts/ 66.279300 bgd. counts: snr = 9.902238
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003827 pixels
  Position = (157.8, 179.7) = 5 0 11.65 1 39 49.6
  Extent = 5.1 (4.0-6.4)", rotation angle = 0
  Source counts = 80.6 +/- 12.1
  Background counts = 66.3
  Rate = 0.004 +/- 0.0006
[Thu May  9 20:12:12 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:12:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:12:12 2013] Assessing source extent using major axis lower bound
[Thu May  9 20:12:12 2013] Source does appear to be extended
[Thu May  9 20:12:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 20:12:38 2013] XMMSAS src. selection expression = ellipse(13683.351240, 15587.979400, 308.242809, 308.242809, 0.000000, X, Y)
[Thu May  9 20:12:38 2013] Not overwriting source region fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_src.reg
[Thu May  9 20:12:38 2013] Extracting stamp from image fullrun_mos2_xmm0112880401_pi300-10000_cl_sm2.00.img.gz, (140, 162) - (176, 197)
[Thu May  9 20:12:38 2013] XMMSAS bgd. selection expression = annulus(13683.351240, 15587.979400, 513.738015, 1027.476030, X, Y)
[Thu May  9 20:12:38 2013] Writing fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1.gif
[Thu May  9 20:12:39 2013] ../../xmm0112880401/products/events/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112880401/products/events/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu May  9 20:12:39 2013] Mean detx,y = (-9943.57, 9868.14) 
[Thu May  9 20:12:39 2013] ../../xmm0112880401/products/images/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112880401/products/images/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu May  9 20:12:39 2013] ../../xmm0112880401/products/spectra/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_src.pi and ../../xmm0112880401/products/spectra/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu May  9 20:12:39 2013] Setting source spectrum file to fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu May  9 20:12:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May  9 20:12:39 2013] ../../xmm0112880401/products/lightcurves/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112880401/products/lightcurves/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu May  9 20:13:40 2013] Not generating rmf since there are only 80 counts
[Thu May  9 20:13:40 2013] rmf not generated due to insufficient counts
[Thu May  9 20:14:44 2013] Updating aperture counts using extracted products
[Thu May  9 20:14:44 2013] Total counts from fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_src.pi.gz = 92.00
[Thu May  9 20:14:44 2013] Total counts from fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 60.00
[Thu May  9 20:14:44 2013] Got source and background scale factors 300800.000000, 2488780.000000
[Thu May  9 20:14:44 2013] User source parameters:
  Position = (157.8, 179.7) = 5 0 11.65 1 39 49.6
  Extent = 5.1 (4.0-6.4)", rotation angle = 0
  Source aperture counts = 84.7 +/- 10.6
  Background aperture counts = 7.3
  Rate = 0.004 +/- 0.0006

[Thu May  9 20:14:47 2013] No arf file for this source, not re-computing flux
[Thu May  9 20:14:50 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 20:14:51 2013] xmm0112880401/analysis//spectral/fullrun_mos2_xmm0112880401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete