[Thu May  9 20:10:55 2013] Detection parameters:
  Position = (157.3, 180.0) = 5 0 11.81 1 39 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.8 +/- 13.4
  Background counts = 4.3
  Rate = 0.006 +/- 0.0007

[Thu May  9 20:10:56 2013] Off-axis axis estimate = 13.36'
[Thu May  9 20:11:22 2013] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Thu May  9 20:11:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 20:11:22 2013] Initial guess for spatial extent in simple fitting = 13.11"
[Thu May  9 20:11:22 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.992
[Thu May  9 20:11:22 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 13.11"
[Thu May  9 20:11:23 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_src4.ximg exists
[Thu May  9 20:11:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_src4.csv
[Thu May  9 20:11:23 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May  9 20:11:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_src4.csv
[Thu May  9 20:11:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:11:23 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May  9 20:11:23 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May  9 20:11:23 2013] Fit fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu May  9 20:11:40 2013] Spatial fit model total counts = 157.998000, observed total counts = 158.000000
[Thu May  9 20:11:40 2013] Offset between fit and detection position for source 3 = 0.669841 pixels
[Thu May  9 20:11:40 2013] 159.510900 total counts/ 67.447900 bgd. counts: snr = 11.209879
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.669841 pixels
  Position = (157.9, 179.8) = 5 0 11.62 1 39 49.9
  Extent = 7.2 (5.6-9.5)", rotation angle = 0
  Source counts = 92.1 +/- 12.6
  Background counts = 67.4
  Rate = 0.005 +/- 0.0007
[Thu May  9 20:11:40 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:11:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:11:40 2013] Assessing source extent using major axis lower bound
[Thu May  9 20:11:40 2013] Source does appear to be extended
[Thu May  9 20:11:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 20:11:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 20:11:58 2013] Initial guess for spatial extent in simple fitting = 7.15"
[Thu May  9 20:11:58 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.870
[Thu May  9 20:11:58 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.15"
[Thu May  9 20:11:58 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src4.ximg exists
[Thu May  9 20:11:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src4.csv
[Thu May  9 20:11:58 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May  9 20:11:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src4.csv
[Thu May  9 20:11:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:11:58 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May  9 20:11:58 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May  9 20:11:58 2013] Fit fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu May  9 20:12:09 2013] Warning, spatial fit 4 centroid is now closest to src. 28
[Thu May  9 20:12:09 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:12:09 2013] Assessing source extent using major axis lower bound
[Thu May  9 20:12:09 2013] Source does appear to be extended
[Thu May  9 20:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 20:12:34 2013] XMMSAS src. selection expression = ellipse(13691.961200, 15593.919600, 429.008002, 429.008002, 0.000000, X, Y)
[Thu May  9 20:12:34 2013] Not overwriting source region fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_src.reg
[Thu May  9 20:12:34 2013] Extracting stamp from image fullrun_mos1_xmm0112880401_pi300-10000_cl_sm2.00.img.gz, (133, 155) - (183, 204)
[Thu May  9 20:12:34 2013] XMMSAS bgd. selection expression = annulus(13691.961200, 15593.919600, 715.013337, 1430.026674, X, Y)
[Thu May  9 20:12:34 2013] Writing fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3.gif
[Thu May  9 20:12:34 2013] ../../xmm0112880401/products/events/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112880401/products/events/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu May  9 20:12:34 2013] Mean detx,y = (10028.11, 9818.12) 
[Thu May  9 20:12:34 2013] ../../xmm0112880401/products/images/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112880401/products/images/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu May  9 20:12:34 2013] ../../xmm0112880401/products/spectra/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_src.pi and ../../xmm0112880401/products/spectra/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu May  9 20:12:34 2013] Setting source spectrum file to fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_src.pi.gz
[Thu May  9 20:12:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May  9 20:12:34 2013] ../../xmm0112880401/products/lightcurves/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112880401/products/lightcurves/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu May  9 20:12:36 2013] Not generating rmf since there are only 92 counts
[Thu May  9 20:12:36 2013] rmf not generated due to insufficient counts
[Thu May  9 20:14:42 2013] Updating aperture counts using extracted products
[Thu May  9 20:14:42 2013] Total counts from fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_src.pi.gz = 104.00
[Thu May  9 20:14:42 2013] Total counts from fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 110.00
[Thu May  9 20:14:42 2013] Got source and background scale factors 582400.000000, 4822400.000000
[Thu May  9 20:14:42 2013] User source parameters:
  Position = (157.9, 179.8) = 5 0 11.62 1 39 49.9
  Extent = 7.2 (5.6-9.5)", rotation angle = 0
  Source aperture counts = 90.7 +/- 11.2
  Background aperture counts = 13.3
  Rate = 0.005 +/- 0.0006

[Thu May  9 20:14:44 2013] No arf file for this source, not re-computing flux
[Thu May  9 20:14:49 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 20:14:50 2013] xmm0112880401/analysis//spectral/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete