[Thu May  9 20:10:56 2013] Detection parameters:
  Position = (365.1, 279.2) = 4 59 11.52 1 47 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.4 +/- 6.8
  Background counts = 3.8
  Rate = 0.002 +/- 0.0005

[Thu May  9 20:10:56 2013] Off-axis axis estimate = 5.03'
[Thu May  9 20:11:22 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Thu May  9 20:11:22 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Thu May  9 20:11:22 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.957
[Thu May  9 20:11:22 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 8.94"
[Thu May  9 20:11:23 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_src16.ximg exists
[Thu May  9 20:11:23 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu May  9 20:11:23 2013] Fit fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_src16 appears to have run properly
[Thu May  9 20:11:23 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu May  9 20:11:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu May  9 20:11:23 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu May  9 20:11:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu May  9 20:11:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880401_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:11:40 2013] Spatial fit model total counts = 46.767300, observed total counts = 48.000000
[Thu May  9 20:11:40 2013] Offset between fit and detection position for source 20 = 0.096938 pixels
[Thu May  9 20:11:40 2013] 50.074900 total counts/ 28.447800 bgd. counts: snr = 4.054842
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.096938 pixels
  Position = (365.0, 279.2) = 4 59 11.54 1 47 2.5
  Extent = 6.0 (3.6-9.7)" x 3.7 (2.2-7.5)", rotation angle = 0
  Source counts = 21.6 +/- 7.1
  Background counts = 28.4
  Rate = 0.001 +/- 0.0004
[Thu May  9 20:11:40 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:11:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:11:40 2013] Assessing source extent using major axis lower bound
[Thu May  9 20:11:40 2013] Source does appear to be extended
[Thu May  9 20:11:40 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.49
[Thu May  9 20:11:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 20:11:58 2013] Initial guess for spatial extent in simple fitting = 4.89"
[Thu May  9 20:11:58 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.137
[Thu May  9 20:11:58 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 4.89"
[Thu May  9 20:11:58 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src15.ximg exists
[Thu May  9 20:11:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src15.csv
[Thu May  9 20:11:58 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu May  9 20:11:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src15.csv
[Thu May  9 20:11:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:11:58 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu May  9 20:11:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu May  9 20:11:58 2013] fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu May  9 20:11:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu May  9 20:11:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880401_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:12:09 2013] Spatial fit model total counts = 43.739500, observed total counts = 48.000000
[Thu May  9 20:12:09 2013] Offset between fit and detection position for source 20 = 0.096741 pixels
[Thu May  9 20:12:09 2013] 47.338100 total counts/ 22.694500 bgd. counts: snr = 5.173016
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.096741 pixels
  Position = (365.0, 279.1) = 4 59 11.54 1 47 2.1
  Extent = 5.8 (3.4-8.1)", rotation angle = 0
  Source counts = 24.6 +/- 6.9
  Background counts = 22.7
  Rate = 0.001 +/- 0.0004
[Thu May  9 20:12:09 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:12:09 2013] Assessing source extent using major axis lower bound
[Thu May  9 20:12:09 2013] Source does appear to be extended
[Thu May  9 20:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 20:12:34 2013] XMMSAS src. selection expression = ellipse(31709.572780, 24236.955000, 349.855846, 349.855846, 0.000000, X, Y)
[Thu May  9 20:12:34 2013] Not overwriting source region fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_src.reg
[Thu May  9 20:12:34 2013] Extracting stamp from image fullrun_mos1_xmm0112880401_pi300-10000_cl_sm2.00.img.gz, (345, 259) - (385, 299)
[Thu May  9 20:12:34 2013] XMMSAS bgd. selection expression = annulus(31709.572780, 24236.955000, 583.093077, 1166.186154, X, Y)
[Thu May  9 20:12:34 2013] Writing fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20.gif
[Thu May  9 20:12:34 2013] ../../xmm0112880401/products/events/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0112880401/products/events/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Thu May  9 20:12:34 2013] Mean detx,y = (-294.71, -7303.96) 
[Thu May  9 20:12:34 2013] ../../xmm0112880401/products/images/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_src.img and ../../xmm0112880401/products/images/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Thu May  9 20:12:34 2013] ../../xmm0112880401/products/spectra/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_src.pi and ../../xmm0112880401/products/spectra/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Thu May  9 20:12:34 2013] Setting source spectrum file to fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_src.pi.gz
[Thu May  9 20:12:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu May  9 20:12:34 2013] ../../xmm0112880401/products/lightcurves/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0112880401/products/lightcurves/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Thu May  9 20:12:37 2013] Not generating rmf since there are only 24 counts
[Thu May  9 20:12:37 2013] rmf not generated due to insufficient counts
[Thu May  9 20:14:43 2013] Updating aperture counts using extracted products
[Thu May  9 20:14:43 2013] Total counts from fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_src.pi.gz = 28.00
[Thu May  9 20:14:43 2013] Total counts from fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_bgd.pi.gz = 57.00
[Thu May  9 20:14:43 2013] Got source and background scale factors 384588.000000, 2528982.000000
[Thu May  9 20:14:43 2013] User source parameters:
  Position = (365.0, 279.1) = 4 59 11.54 1 47 2.1
  Extent = 5.8 (3.4-8.1)", rotation angle = 0
  Source aperture counts = 19.3 +/- 6.4
  Background aperture counts = 8.7
  Rate = 0.001 +/- 0.0003

[Thu May  9 20:14:44 2013] No arf file for this source, not re-computing flux
[Thu May  9 20:14:49 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 20:14:50 2013] xmm0112880401/analysis//spectral/fullrun_mos1_xmm0112880401_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete