[Thu Aug 23 14:03:57 2012] Detection parameters:
  Position = (276.3, 272.1) = 23 31 50.30 19 55 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.4 +/- 17.1
  Background counts = 17.8
  Rate = 0.006 +/- 0.001

[Thu Aug 23 14:03:57 2012] Off-axis axis estimate = 2.49'
[Thu Aug 23 14:05:52 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 14:05:52 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Thu Aug 23 14:05:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975
[Thu Aug 23 14:05:52 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 7.68"
[Thu Aug 23 17:23:04 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src36.ximg exists
[Thu Aug 23 17:23:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src36.csv
[Thu Aug 23 17:23:05 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Aug 23 17:23:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src36.csv
[Thu Aug 23 17:23:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:23:05 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Aug 23 17:23:05 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Aug 23 17:23:05 2012] Fit fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Thu Aug 23 18:11:56 2012] Warning, spatial fit 36 centroid is now closest to src. 37
[Thu Aug 23 18:11:56 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 18:11:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 18:11:56 2012] Assessing source extent using major
[Thu Aug 23 18:11:56 2012] Source does appear to be extended
[Thu Aug 23 18:11:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 18:11:56 2012] Source is confused with source 37
[Thu Aug 23 18:11:56 2012] Source is confused with source 42
[Thu Aug 23 18:12:10 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 18:12:10 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Thu Aug 23 18:12:10 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975
[Thu Aug 23 18:12:10 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 7.68"
[Thu Aug 23 20:03:08 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src33.ximg exists
[Thu Aug 23 20:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src33.csv
[Thu Aug 23 20:03:08 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Aug 23 20:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src33.csv
[Thu Aug 23 20:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 20:03:09 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Aug 23 20:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu Aug 23 20:03:09 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Aug 23 20:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu Aug 23 20:03:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 20:38:10 2012] Source 36 is offset by 5.761569 and 1.653989 pixels which is larger than
2 X fitted extent = 1.318989 x 3.884506, not incorporating fit results
[Thu Aug 23 20:38:10 2012] Warning, spatial fit 33 centroid is now closest to src. 42
[Thu Aug 23 20:38:10 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 20:38:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 20:38:10 2012] Assessing source extent using major
[Thu Aug 23 20:38:10 2012] Source does appear to be extended
[Thu Aug 23 20:38:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 20:38:22 2012] XMMSAS src. selection expression = ellipse(23990.772461, 23624.381073, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 23 20:38:22 2012] Writing source region out to fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src36_src.reg
[Thu Aug 23 20:38:22 2012] Extracting stamp from image fullrun_pn_xmm0112880301_pi300-10000_cl_sm2.00.img.gz, (239, 235) - (314, 310)
[Thu Aug 23 20:38:22 2012] XMMSAS bgd. selection expression = annulus(23990.772461, 23624.381073, 1087.500000, 2175.000000, X, Y) && !ellipse(23465.699000, 24820.496000, 1478.143243, 1478.143243, 0.000000, X, Y) && !ellipse(24330.882000, 26497.164000, 1138.128033, 1138.128033, 0.000000, X, Y) && !ellipse(22594.914703, 24290.586334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23988.170200, 24132.586000, 1150.016033, 1150.016033, 0.000000, X, Y) && !ellipse(24430.779846, 24894.902863, 3480.000000, 3480.000000, 0.000000, X, Y)
[Thu Aug 23 20:38:22 2012] Writing fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src36.gif
[Thu Aug 23 21:07:02 2012] Mean detx,y = (-289.96, -1394.96) 
[Thu Aug 23 21:07:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 21:07:22 2012] grppha failed
[Thu Aug 23 21:07:22 2012] Setting source spectrum file to fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src36_src.pi.gz
[Thu Aug 23 21:07:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu Aug 23 21:12:51 2012] Not generating rmf since there are only 73 counts
[Thu Aug 23 21:12:51 2012] rmf not generated due to insufficient counts
[Thu Aug 23 21:31:52 2012] Updating aperture counts using extracted products
[Thu Aug 23 21:31:52 2012] Error reading totcts from fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src36_src.pi.gz
[Thu Aug 23 21:31:52 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 21:31:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 23 21:31:57 2012] xmm0112880301/analysis//spectral/fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete