[Thu Aug 23 14:03:56 2012] Detection parameters:
  Position = (270.2, 285.9) = 23 31 52.18 19 56 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74667.1 +/- 312.0
  Background counts = 19.6
  Rate = 7 +/- 0.03

[Thu Aug 23 14:03:57 2012] Off-axis axis estimate = 2.24'
[Thu Aug 23 14:05:52 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 14:05:52 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Thu Aug 23 14:05:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801
[Thu Aug 23 14:05:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.55"
[Thu Aug 23 17:23:04 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 23 17:23:04 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 17:23:04 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 23 17:23:04 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 17:23:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:23:05 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 23 17:23:05 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 23 17:23:05 2012] Fit fullrun_pn_xmm0112880301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug 23 18:11:56 2012] Spatial fit model total counts = 69438.800000, observed total counts = 66891.000000
[Thu Aug 23 18:11:56 2012] Offset between fit and detection position for source 1 = 0.106667 pixels
[Thu Aug 23 18:11:56 2012] 69658.400000 total counts/ 13893.000000 bgd. counts: snr = 473.115094
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.106667 pixels
  Position = (270.3, 285.8) = 23 31 52.17 19 56 13.7
  Extent = 6.2 (6.1-6.2)", rotation angle = 0
  Source counts = 55765.4 +/- 263.9
  Background counts = 13893.0
  Rate = 5 +/- 0.02
[Thu Aug 23 18:11:56 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 18:11:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 18:11:56 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 18:11:56 2012] Source does appear to be extended
[Thu Aug 23 18:11:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 18:11:56 2012] Source is confused with source 42
[Thu Aug 23 18:12:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 18:12:10 2012] Initial guess for spatial extent in simple fitting = 6.18"
[Thu Aug 23 18:12:10 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.084
[Thu Aug 23 18:12:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.18"
[Thu Aug 23 20:03:07 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 23 20:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src1.csv
[Thu Aug 23 20:03:07 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 23 20:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src1.csv
[Thu Aug 23 20:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 20:03:08 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 23 20:03:08 2012] fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 23 20:03:08 2012] Fit fullrun_pn_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 23 20:38:10 2012] Spatial fit model total counts = 70109.800000, observed total counts = 67090.000000
[Thu Aug 23 20:38:10 2012] Offset between fit and detection position for source 1 = 0.012758 pixels
[Thu Aug 23 20:38:10 2012] 69954.100000 total counts/ 14366.500000 bgd. counts: snr = 463.769769
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012758 pixels
  Position = (270.3, 285.9) = 23 31 52.17 19 56 13.7
  Extent = 6.2 (6.1-6.2)", rotation angle = 0
  Source counts = 55587.6 +/- 264.5
  Background counts = 14366.5
  Rate = 5 +/- 0.02
[Thu Aug 23 20:38:10 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 20:38:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 20:38:10 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 20:38:10 2012] Source does appear to be extended
[Thu Aug 23 20:38:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 20:38:21 2012] Counts = 55587.600000, rescaling region sizes by 3.000000
[Thu Aug 23 20:38:21 2012] XMMSAS src. selection expression = ellipse(23465.699000, 24820.496000, 1108.607432, 1108.607432, 0.000000, X, Y)
[Thu Aug 23 20:38:21 2012] Writing source region out to fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 23 20:38:21 2012] Extracting stamp from image fullrun_pn_xmm0112880301_pi300-10000_cl_sm2.00.img.gz, (207, 222) - (334, 350)
[Thu Aug 23 20:38:21 2012] XMMSAS bgd. selection expression = annulus(23465.699000, 24820.496000, 5543.037159, 11086.074319, X, Y) && !ellipse(30106.452000, 37125.202000, 1356.536039, 1356.536039, 0.000000, X, Y) && !ellipse(29688.667200, 36428.844600, 2257.632065, 519.200015, 298.683000, X, Y) && !ellipse(17866.789413, 36484.995178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29379.986308, 35816.772526, 1746.512050, 511.207999, 302.061188, X, Y) && !ellipse(29506.617600, 36053.288200, 1746.512050, 511.118415, 301.189800, X, Y) && !ellipse(19227.576889, 35912.058441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34399.705963, 35417.360107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.409693, 34952.352998, 2031.308351, 1323.500431, 102.165316, X, Y) && !ellipse(14020.416611, 34765.513245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20896.836288, 34280.171234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28403.330660, 33988.440200, 1590.488046, 426.276012, 118.894000, X, Y) && !ellipse(27821.149200, 32866.872400, 1474.504042, 448.608013, 298.293000, X, Y) && !ellipse(27564.686173, 32441.799500, 1474.504042, 453.908485, 298.327274, X, Y) && !ellipse(27280.662000, 31801.214000, 1329.320038, 1329.320038, 0.000000, X, Y) && !ellipse(26927.122000, 31280.594000, 1379.896040, 1379.896040, 0.000000, X, Y) && !ellipse(26560.950300, 30592.083200, 1348.648039, 432.059212, 297.407000, X, Y) && !ellipse(26250.709503, 29964.415802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25963.748000, 29523.642000, 1293.512037, 1293.512037, 0.000000, X, Y) && !ellipse(25979.797800, 29479.851600, 2598.400075, 442.130413, 118.790000, X, Y) && !ellipse(25707.618000, 28952.774000, 1113.888032, 1113.888032, 0.000000, X, Y) && !ellipse(25128.498036, 27929.637033, 1162.712033, 420.984159, 121.114481, X, Y) && !ellipse(33885.084290, 27636.273712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.931200, 27933.398000, 480.755214, 480.755214, 0.000000, X, Y) && !ellipse(24330.882000, 26497.164000, 1138.128033, 1138.128033, 0.000000, X, Y) && !ellipse(12115.426453, 27102.588928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13816.680283, 26477.910980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22594.914703, 24290.586334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23990.772461, 23624.381073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23988.170200, 24132.586000, 1150.016033, 1150.016033, 0.000000, X, Y) && !ellipse(29409.867798, 19106.984131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22351.691000, 19005.941400, 335.948810, 335.948810, 0.000000, X, Y) && !ellipse(12273.001114, 18901.482208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24430.779846, 24894.902863, 3480.000000, 3480.000000, 0.000000, X, Y)
[Thu Aug 23 20:38:21 2012] Writing fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src1.gif
[Thu Aug 23 20:38:35 2012] Mean detx,y = (575.34, -629.37) 
[Thu Aug 23 20:38:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 20:42:20 2012] grppha failed
[Thu Aug 23 20:42:20 2012] Setting source spectrum file to fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 23 20:42:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 23 21:31:52 2012] Updating aperture counts using extracted products
[Thu Aug 23 21:31:52 2012] Error reading totcts from fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 23 21:31:52 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 21:31:56 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Aug 23 21:31:56 2012] Source 1 has no response, skipping
[Thu Aug 23 21:31:57 2012] xmm0112880301/analysis//spectral/fullrun_pn_xmm0112880301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete