[Thu Aug 23 14:04:42 2012] Detection parameters: Position = (159.2, 304.9) = 23 32 26.45 19 57 38.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 42.1 +/- 8.7 Background counts = 5.5 Rate = 0.005 +/- 0.001 [Thu Aug 23 14:04:42 2012] Off-axis axis estimate = 10.11' [Thu Aug 23 17:47:40 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting [Thu Aug 23 17:47:40 2012] Initial guess for spatial extent in simple fitting = 11.48" [Thu Aug 23 17:47:40 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913 [Thu Aug 23 17:47:40 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.48" [Thu Aug 23 18:11:46 2012] fullrun_mos2_xmm0112880301_pi300-10000_cl_pass0_src4.ximg exists [Thu Aug 23 18:11:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112880301_pi300-10000_cl_pass0_src4.csv [Thu Aug 23 18:11:46 2012] fullrun_mos2_xmm0112880301_pi300-10000_cl_pass0_src4_1.ximg exists [Thu Aug 23 18:11:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112880301_pi300-10000_cl_pass0_src4.csv [Thu Aug 23 18:11:46 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112880301_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112880301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Aug 23 18:11:47 2012] fullrun_mos2_xmm0112880301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Thu Aug 23 18:11:47 2012] fullrun_mos2_xmm0112880301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Thu Aug 23 18:11:47 2012] Fit fullrun_mos2_xmm0112880301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Thu Aug 23 18:12:02 2012] Source 16 is offset by 8.443191 and 3.655534 pixels which is larger than 2 X fitted extent = 1.403214 x 1.403214, not incorporating fit results [Thu Aug 23 18:12:02 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.242972 pixels away [Thu Aug 23 18:12:02 2012] Vigneting correction estimate = 1.000000 [Thu Aug 23 18:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 23 18:12:02 2012] Assessing source extent using major [Thu Aug 23 18:12:02 2012] Source does appear to be extended [Thu Aug 23 18:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 23 20:13:22 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting [Thu Aug 23 20:13:22 2012] Initial guess for spatial extent in simple fitting = 11.48" [Thu Aug 23 20:13:22 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913 [Thu Aug 23 20:13:22 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.48" [Thu Aug 23 20:38:01 2012] fullrun_mos2_xmm0112880301_pi300-10000_cl_pass1_src4.ximg exists [Thu Aug 23 20:38:01 2012] fullrun_mos2_xmm0112880301_pi300-10000_cl_pass1_src4_1.ximg exists [Thu Aug 23 20:38:01 2012] Fit fullrun_mos2_xmm0112880301_pi300-10000_cl_pass1_src4 appears to have run properly [Thu Aug 23 20:38:01 2012] fullrun_mos2_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Thu Aug 23 20:38:01 2012] fullrun_mos2_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Thu Aug 23 20:38:01 2012] Fit fullrun_mos2_xmm0112880301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly [Thu Aug 23 20:38:14 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 15.215989 pixels away [Thu Aug 23 20:38:14 2012] Vigneting correction estimate = 1.000000 [Thu Aug 23 20:38:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 23 20:38:14 2012] Assessing source extent using major [Thu Aug 23 20:38:14 2012] Source does appear to be extended [Thu Aug 23 20:38:14 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 23 21:18:43 2012] XMMSAS src. selection expression = ellipse(13799.195587, 26480.393433, 652.500000, 652.500000, 0.000000, X, Y) [Thu Aug 23 21:18:43 2012] Writing source region out to fullrun_mos2_xmm0112880301_pi300-10000_pass1_cl_src16_src.reg [Thu Aug 23 21:18:43 2012] Extracting stamp from image fullrun_mos2_xmm0112880301_pi300-10000_cl_sm2.00.img.gz, (122, 267) - (197, 342) [Thu Aug 23 21:18:43 2012] XMMSAS bgd. selection expression = annulus(13799.195587, 26480.393433, 1087.500000, 2175.000000, X, Y) && !ellipse(12097.299240, 27119.862549, 870.000000, 870.000000, 0.000000, X, Y) [Thu Aug 23 21:18:43 2012] Writing fullrun_mos2_xmm0112880301_pi300-10000_pass1_cl_src16.gif [Thu Aug 23 21:27:07 2012] Mean detx,y = (-9707.23, 3713.07) [Thu Aug 23 21:27:08 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 23 21:27:16 2012] grppha failed [Thu Aug 23 21:27:16 2012] Setting source spectrum file to fullrun_mos2_xmm0112880301_pi300-10000_pass1_cl_src16_src.pi.gz [Thu Aug 23 21:27:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112880301_pi300-10000_pass1_cl_src16_bgd.pi.gz [Thu Aug 23 21:31:33 2012] Not generating rmf since there are only 42 counts [Thu Aug 23 21:31:33 2012] rmf not generated due to insufficient counts [Thu Aug 23 21:31:52 2012] Updating aperture counts using extracted products [Thu Aug 23 21:31:52 2012] Error reading totcts from fullrun_mos2_xmm0112880301_pi300-10000_pass1_cl_src16_src.pi.gz [Thu Aug 23 21:31:52 2012] No arf file for this source, not re-computing flux [Thu Aug 23 21:31:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Aug 23 21:31:56 2012] xmm0112880301/analysis//spectral/fullrun_mos2_xmm0112880301_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete