[Tue May 21 18:02:45 2013] Detection parameters:
  Position = (398.5, 197.0) = 11 1 16.92 -34 51 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.5 +/- 19.4
  Background counts = 24.2
  Rate = 0.007 +/- 0.0007

[Tue May 21 18:02:47 2013] Off-axis axis estimate = 10.33'
[Tue May 21 18:03:12 2013] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:12 2013] Initial guess for spatial extent in simple fitting = 11.59"
[Tue May 21 18:03:12 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.048
[Tue May 21 18:03:12 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 11.59"
[Tue May 21 18:03:13 2013] fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_src25.ximg exists
[Tue May 21 18:03:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_src25.csv
[Tue May 21 18:03:13 2013] fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue May 21 18:03:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_src25.csv
[Tue May 21 18:03:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:14 2013] fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue May 21 18:03:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue May 21 18:03:14 2013] fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue May 21 18:03:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue May 21 18:03:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:26 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.751281 pixels away
[Tue May 21 18:03:26 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:26 2013] Assessing source extent using major
[Tue May 21 18:03:26 2013] Source does appear to be extended
[Tue May 21 18:03:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:26 2013] Source is confused with source 24
[Tue May 21 18:03:47 2013] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:47 2013] Initial guess for spatial extent in simple fitting = 11.59"
[Tue May 21 18:03:47 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.048
[Tue May 21 18:03:47 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.59"
[Tue May 21 18:03:48 2013] fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_src25.ximg exists
[Tue May 21 18:03:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_src25.csv
[Tue May 21 18:03:48 2013] fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue May 21 18:03:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_src25.csv
[Tue May 21 18:03:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:49 2013] fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue May 21 18:03:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue May 21 18:03:49 2013] fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue May 21 18:03:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue May 21 18:03:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:04:02 2013] Spatial fit model total counts = 707.283000, observed total counts = 608.000000
[Tue May 21 18:04:02 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 18:04:02 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:02 2013] Assessing source extent using major
[Tue May 21 18:04:02 2013] Source does appear to be extended
[Tue May 21 18:04:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:04:20 2013] XMMSAS src. selection expression = ellipse(34619.473358, 17089.082214, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 18:04:20 2013] Not overwriting source region fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_src.reg
[Tue May 21 18:04:20 2013] Extracting stamp from image fullrun_pn_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (361, 159) - (436, 234)
[Tue May 21 18:04:20 2013] XMMSAS bgd. selection expression = annulus(34619.473358, 17089.082214, 1087.500000, 2175.000000, X, Y) && !ellipse(31833.574000, 20467.056000, 1525.936044, 1525.936044, 0.000000, X, Y) && !ellipse(32825.995595, 19225.906698, 1667.088048, 427.752143, 49.774690, X, Y) && !ellipse(33772.076200, 18107.348000, 1791.968052, 459.347213, 50.620000, X, Y) && !ellipse(33535.802000, 18354.236000, 1780.976051, 1780.976051, 0.000000, X, Y) && !ellipse(30628.398000, 21890.326000, 2969.480085, 2969.480085, 0.000000, X, Y) && !ellipse(31173.220000, 21436.354000, 3001.288086, 3001.288086, 0.000000, X, Y)
[Tue May 21 18:04:20 2013] Writing fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26.gif
[Tue May 21 18:04:24 2013] ../../xmm0112880201/products/events/fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0112880201/products/events/fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Tue May 21 18:04:24 2013] Mean detx,y = (160.55, 13797.45) 
[Tue May 21 18:04:24 2013] ../../xmm0112880201/products/images/fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_src.img and ../../xmm0112880201/products/images/fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Tue May 21 18:04:24 2013] ../../xmm0112880201/products/spectra/fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0112880201/products/spectra/fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Tue May 21 18:04:24 2013] Setting source spectrum file to fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue May 21 18:04:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue May 21 18:04:24 2013] ../../xmm0112880201/products/lightcurves/fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0112880201/products/lightcurves/fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Tue May 21 18:54:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 21 18:54:57 2013] rmf not generated due to insufficient counts
[Tue May 21 20:35:31 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:31 2013] Total counts from fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 503.00
[Tue May 21 20:35:31 2013] Total counts from fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_bgd.pi.gz = 341.00
[Tue May 21 20:35:31 2013] Got source and background scale factors 1299898.000000, 438167.000000
[Tue May 21 20:35:31 2013] User source parameters:
  Position = (398.5, 197.0) = 11 1 16.92 -34 51 28.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -508.6 +/- 23.4
  Background aperture counts = 1011.6
  Rate = -0.02 +/- 0.0009

[Tue May 21 20:35:31 2013] Updating counts from extracted products
[Tue May 21 20:35:31 2013] Set source signif. to -508.64/31.81 = -15.99
[Tue May 21 20:35:39 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:39 2013] Using photon index=1.80, rate=-0.0192, arf fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26.arf
[Tue May 21 20:35:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:39 2013] Updated flux is not positive, keeping original flux
[Tue May 21 20:36:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 20:36:18 2013] xmm0112880201/analysis//spectral/fullrun_pn_xmm0112880201_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete