[Tue May 21 18:02:48 2013] Detection parameters:
  Position = (372.8, 344.9) = 11 1 26.07 -34 40 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.2 +/- 13.1
  Background counts = 8.7
  Rate = 0.005 +/- 0.0006

[Tue May 21 18:02:49 2013] Off-axis axis estimate = 6.35'
[Tue May 21 18:03:15 2013] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:15 2013] Initial guess for spatial extent in simple fitting = 9.61"
[Tue May 21 18:03:15 2013] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.954
[Tue May 21 18:03:15 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.61"
[Tue May 21 18:03:15 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src4.ximg exists
[Tue May 21 18:03:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src4.csv
[Tue May 21 18:03:15 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue May 21 18:03:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src4.csv
[Tue May 21 18:03:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue May 21 18:03:16 2013] Fit fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue May 21 18:03:36 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.479156 pixels away
[Tue May 21 18:03:36 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:36 2013] Assessing source extent using major
[Tue May 21 18:03:36 2013] Source does appear to be extended
[Tue May 21 18:03:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:50 2013] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:50 2013] Initial guess for spatial extent in simple fitting = 9.61"
[Tue May 21 18:03:50 2013] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.954
[Tue May 21 18:03:50 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.61"
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src4.ximg exists
[Tue May 21 18:03:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src4.csv
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue May 21 18:03:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src4.csv
[Tue May 21 18:03:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue May 21 18:03:51 2013] Fit fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue May 21 18:04:09 2013] Spatial fit model total counts = 177.497000, observed total counts = 175.000000
[Tue May 21 18:04:09 2013] Offset between fit and detection position for source 7 = 0.329282 pixels
[Tue May 21 18:04:09 2013] 179.940900 total counts/ 109.113000 bgd. counts: snr = 6.780569
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.329282 pixels
  Position = (372.4, 344.9) = 11 1 26.19 -34 40 45.0
  Extent = 4.4 (3.7-5.5)", rotation angle = 0
  Source counts = 70.8 +/- 13.4
  Background counts = 109.1
  Rate = 0.002 +/- 0.0005
[Tue May 21 18:04:09 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:09 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:04:09 2013] Source does appear to be extended
[Tue May 21 18:04:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 20:05:05 2013] XMMSAS src. selection expression = ellipse(32353.162800, 29961.435600, 261.883208, 261.883208, 0.000000, X, Y)
[Tue May 21 20:05:05 2013] Writing source region out to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src7_src.reg
[Tue May 21 20:05:05 2013] Extracting stamp from image fullrun_mos2_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (357, 330) - (387, 360)
[Tue May 21 20:05:05 2013] XMMSAS bgd. selection expression = annulus(32353.162800, 29961.435600, 436.472013, 872.944025, X, Y)
[Tue May 21 20:05:05 2013] Writing fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src7.gif
[Tue May 21 20:12:53 2013] Mean detx,y = (-6360.17, -2457.07) 
[Tue May 21 20:12:55 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 20:13:06 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 20:13:07 2013] Setting source spectrum file to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue May 21 20:13:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue May 21 20:27:41 2013] Not generating rmf since there are only 70 counts
[Tue May 21 20:27:41 2013] rmf not generated due to insufficient counts
[Tue May 21 20:35:47 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:47 2013] Total counts from fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 83.00
[Tue May 21 20:35:47 2013] Total counts from fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src7_bgd.pi.gz = 98.00
[Tue May 21 20:35:47 2013] Got source and background scale factors 207606.000000, 1728128.000000
[Tue May 21 20:35:47 2013] User source parameters:
  Position = (372.4, 344.9) = 11 1 26.19 -34 40 45.0
  Extent = 4.4 (3.7-5.5)", rotation angle = 0
  Source aperture counts = 71.2 +/- 10.2
  Background aperture counts = 11.8
  Rate = 0.002 +/- 0.0004

[Tue May 21 20:35:49 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:49 2013] Using photon index=1.80, rate=0.00246, arf fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src7.arf
[Tue May 21 20:35:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:49 2013] Updating source flux to 4.8e-14
[Tue May 21 20:35:56 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 20:36:01 2013] xmm0112880201/analysis//spectral/fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete