[Tue May 21 18:02:48 2013] Detection parameters:
  Position = (307.7, 430.2) = 11 1 49.02 -34 34 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.1 +/- 12.2
  Background counts = 7.5
  Rate = 0.004 +/- 0.0004

[Tue May 21 18:02:49 2013] Off-axis axis estimate = 9.58'
[Tue May 21 18:03:15 2013] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:15 2013] Initial guess for spatial extent in simple fitting = 11.22"
[Tue May 21 18:03:15 2013] source mask rpix=2.6, npix_max = 37, mask sum = 25, frac = 0.659
[Tue May 21 18:03:15 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.22"
[Tue May 21 18:03:15 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src10.ximg exists
[Tue May 21 18:03:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src10.csv
[Tue May 21 18:03:15 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May 21 18:03:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src10.csv
[Tue May 21 18:03:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May 21 18:03:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May 21 18:03:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 21 18:03:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:36 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.670593 pixels away
[Tue May 21 18:03:36 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:36 2013] Assessing source extent using major
[Tue May 21 18:03:36 2013] Source does appear to be extended
[Tue May 21 18:03:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:50 2013] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:50 2013] Initial guess for spatial extent in simple fitting = 11.22"
[Tue May 21 18:03:50 2013] source mask rpix=2.6, npix_max = 37, mask sum = 25, frac = 0.659
[Tue May 21 18:03:50 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 11.22"
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src10.ximg exists
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue May 21 18:03:51 2013] Fit fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src10 appears to have run properly
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue May 21 18:03:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May 21 18:03:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 21 18:03:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:04:09 2013] Spatial fit model total counts = 173.569000, observed total counts = 173.000000
[Tue May 21 18:04:09 2013] Offset between fit and detection position for source 5 = 0.369239 pixels
[Tue May 21 18:04:09 2013] 169.034100 total counts/ 109.605000 bgd. counts: snr = 5.676543
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.369239 pixels
  Position = (307.4, 430.0) = 11 1 49.12 -34 34 35.2
  Extent = 6.5" x 2.8", rotation angle = 338
  Source counts = 59.4 +/- 13.0
  Background counts = 109.6
  Rate = 0.002 +/- 0.0005
[Tue May 21 18:04:09 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:09 2013] Assessing source extent using major
[Tue May 21 18:04:09 2013] Source does appear to be extended
[Tue May 21 18:04:09 2013] Computing asymmetry using major and minor axis, asym = 2.33
[Tue May 21 18:04:09 2013] Source is asymmetric
[Tue May 21 20:05:05 2013] XMMSAS src. selection expression = ellipse(26696.139672, 37361.176117, 392.502823, 168.276605, 338.313037, X, Y)
[Tue May 21 20:05:05 2013] Writing source region out to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src5_src.reg
[Tue May 21 20:05:05 2013] Extracting stamp from image fullrun_mos2_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (285, 407) - (330, 453)
[Tue May 21 20:05:05 2013] XMMSAS bgd. selection expression = annulus(26696.139672, 37361.176117, 654.171372, 1308.342745, X, Y)
[Tue May 21 20:05:05 2013] Writing fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src5.gif
[Tue May 21 20:15:32 2013] Mean detx,y = (-6521.68, 6883.34) 
[Tue May 21 20:15:35 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 20:16:00 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 20:16:00 2013] Setting source spectrum file to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 21 20:16:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue May 21 20:33:23 2013] Not generating rmf since there are only 59 counts
[Tue May 21 20:33:23 2013] rmf not generated due to insufficient counts
[Tue May 21 20:35:48 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:48 2013] Total counts from fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 80.00
[Tue May 21 20:35:48 2013] Total counts from fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 176.00
[Tue May 21 20:35:48 2013] Got source and background scale factors 160396.000000, 3536378.000000
[Tue May 21 20:35:48 2013] User source parameters:
  Position = (307.4, 430.0) = 11 1 49.12 -34 34 35.2
  Extent = 6.5" x 2.8", rotation angle = 338
  Source aperture counts = 72.0 +/- 10.0
  Background aperture counts = 8.0
  Rate = 0.003 +/- 0.0003

[Tue May 21 20:35:49 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:49 2013] Using photon index=1.80, rate=0.00207, arf fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src5.arf
[Tue May 21 20:35:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:49 2013] Updating source flux to 6.5e-14
[Tue May 21 20:35:56 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 20:36:01 2013] xmm0112880201/analysis//spectral/fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete