[Tue May 21 18:02:48 2013] Detection parameters:
  Position = (297.1, 322.1) = 11 1 52.74 -34 42 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20739.4 +/- 170.5
  Background counts = 9.6
  Rate = 0.7 +/- 0.006

[Tue May 21 18:02:49 2013] Off-axis axis estimate = 1.72'
[Tue May 21 18:03:15 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:15 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Tue May 21 18:03:15 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Tue May 21 18:03:15 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue May 21 18:03:15 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 21 18:03:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src1.csv
[Tue May 21 18:03:15 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 21 18:03:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src1.csv
[Tue May 21 18:03:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 21 18:03:16 2013] Fit fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 21 18:03:36 2013] Spatial fit model total counts = 18674.200000, observed total counts = 18339.000000
[Tue May 21 18:03:36 2013] Offset between fit and detection position for source 3 = 0.209788 pixels
[Tue May 21 18:03:36 2013] 18707.520000 total counts/ 4126.820000 bgd. counts: snr = 226.971125
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.209788 pixels
  Position = (296.9, 322.2) = 11 1 52.80 -34 42 24.2
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 14580.7 +/- 136.8
  Background counts = 4126.8
  Rate = 0.5 +/- 0.005
[Tue May 21 18:03:36 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:36 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:03:36 2013] Source does appear to be extended
[Tue May 21 18:03:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:50 2013] Initial guess for spatial extent in simple fitting = 5.74"
[Tue May 21 18:03:50 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.208
[Tue May 21 18:03:50 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.74"
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 21 18:03:51 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src1.csv
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 21 18:03:51 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src1.csv
[Tue May 21 18:03:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 21 18:03:51 2013] Fit fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 21 18:04:09 2013] Spatial fit model total counts = 18725.600000, observed total counts = 18339.000000
[Tue May 21 18:04:09 2013] Offset between fit and detection position for source 3 = 0.002739 pixels
[Tue May 21 18:04:09 2013] 18762.110000 total counts/ 4169.310000 bgd. counts: snr = 225.999010
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.002739 pixels
  Position = (297.0, 322.2) = 11 1 52.80 -34 42 24.2
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 14592.8 +/- 137.0
  Background counts = 4169.3
  Rate = 0.5 +/- 0.005
[Tue May 21 18:04:09 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:09 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:04:09 2013] Source does appear to be extended
[Tue May 21 18:04:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 20:05:05 2013] Counts = 14592.800000, rescaling region sizes by 3.000000
[Tue May 21 20:05:05 2013] XMMSAS src. selection expression = ellipse(25786.211180, 27981.465400, 1029.988830, 1029.988830, 0.000000, X, Y)
[Tue May 21 20:05:05 2013] Writing source region out to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src3_src.reg
[Tue May 21 20:05:05 2013] Extracting stamp from image fullrun_mos2_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (238, 263) - (356, 381)
[Tue May 21 20:05:05 2013] XMMSAS bgd. selection expression = annulus(25786.211180, 27981.465400, 5149.944148, 10299.888296, X, Y) && !ellipse(32353.162800, 29961.435600, 349.177610, 349.177610, 0.000000, X, Y) && !ellipse(28199.304535, 18726.274170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26696.139672, 37361.176117, 523.337098, 224.368806, 338.313037, X, Y) && !ellipse(26794.111694, 27987.563293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21769.056000, 16563.656000, 1680.264048, 1680.264048, 0.000000, X, Y)
[Tue May 21 20:05:05 2013] Writing fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src3.gif
[Tue May 21 20:05:14 2013] Mean detx,y = (20.43, 66.50) 
[Tue May 21 20:05:16 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 20:12:10 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 20:12:10 2013] Setting source spectrum file to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 21 20:12:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 21 20:35:46 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:46 2013] Total counts from fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 19071.00
[Tue May 21 20:35:46 2013] Total counts from fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 9429.00
[Tue May 21 20:35:46 2013] Got source and background scale factors 3074452.000000, 227033840.000000
[Tue May 21 20:35:46 2013] User source parameters:
  Position = (297.0, 322.2) = 11 1 52.80 -34 42 24.2
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source aperture counts = 18943.3 +/- 139.1
  Background aperture counts = 127.7
  Rate = 0.7 +/- 0.005

[Tue May 21 20:35:49 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:49 2013] Using photon index=1.80, rate=0.507, arf fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src3.arf
[Tue May 21 20:35:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:49 2013] Updating source flux to 5.5e-12
[Tue May 21 20:36:01 2013] xmm0112880201/analysis//spectral/fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete