[Tue May 21 18:02:48 2013] Detection parameters:
  Position = (151.4, 271.0) = 11 2 44.19 -34 46 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.4 +/- 14.7
  Background counts = 6.6
  Rate = 0.005 +/- 0.0005

[Tue May 21 18:02:49 2013] Off-axis axis estimate = 10.84'
[Tue May 21 18:03:15 2013] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:15 2013] Initial guess for spatial extent in simple fitting = 11.85"
[Tue May 21 18:03:15 2013] source mask rpix=2.7, npix_max = 41, mask sum = 41, frac = 0.986
[Tue May 21 18:03:15 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.85"
[Tue May 21 18:03:15 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 21 18:03:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src5.csv
[Tue May 21 18:03:15 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 21 18:03:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src5.csv
[Tue May 21 18:03:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 21 18:03:16 2013] Fit fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue May 21 18:03:36 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.998299 pixels away
[Tue May 21 18:03:36 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:36 2013] Assessing source extent using major
[Tue May 21 18:03:36 2013] Source does appear to be extended
[Tue May 21 18:03:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:50 2013] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 21 18:03:50 2013] Initial guess for spatial extent in simple fitting = 11.85"
[Tue May 21 18:03:50 2013] source mask rpix=2.7, npix_max = 41, mask sum = 41, frac = 0.986
[Tue May 21 18:03:50 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 11.85"
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 21 18:03:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src5.csv
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 21 18:03:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src5.csv
[Tue May 21 18:03:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 21 18:03:51 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 21 18:03:51 2013] Fit fullrun_mos2_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue May 21 18:04:09 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.142614 pixels away
[Tue May 21 18:04:09 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:09 2013] Assessing source extent using major
[Tue May 21 18:04:09 2013] Source does appear to be extended
[Tue May 21 18:04:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 20:05:05 2013] XMMSAS src. selection expression = ellipse(13123.318054, 23529.625732, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 20:05:05 2013] Writing source region out to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src2_src.reg
[Tue May 21 20:05:05 2013] Extracting stamp from image fullrun_mos2_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (114, 234) - (189, 309)
[Tue May 21 20:05:05 2013] XMMSAS bgd. selection expression = annulus(13123.318054, 23529.625732, 1087.500000, 2175.000000, X, Y)
[Tue May 21 20:05:05 2013] Writing fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src2.gif
[Tue May 21 20:13:12 2013] Mean detx,y = (12694.67, 4419.74) 
[Tue May 21 20:13:14 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 20:13:32 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 20:13:33 2013] Setting source spectrum file to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 21 20:13:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue May 21 20:27:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 21 20:27:52 2013] rmf not generated due to insufficient counts
[Tue May 21 20:35:47 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:47 2013] Total counts from fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 163.00
[Tue May 21 20:35:47 2013] Total counts from fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 365.00
[Tue May 21 20:35:47 2013] Got source and background scale factors 1232276.000000, 10228962.000000
[Tue May 21 20:35:47 2013] User source parameters:
  Position = (151.4, 271.0) = 11 2 44.19 -34 46 4.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 119.0 +/- 13.8
  Background aperture counts = 44.0
  Rate = 0.004 +/- 0.0005

[Tue May 21 20:35:47 2013] Updating counts from extracted products
[Tue May 21 20:35:47 2013] Set source signif. to 119.03/6.63 = 17.95
[Tue May 21 20:35:49 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:49 2013] Using photon index=1.80, rate=0.00414, arf fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src2.arf
[Tue May 21 20:35:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:49 2013] Updating source flux to 1.2e-13
[Tue May 21 20:35:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 20:36:01 2013] xmm0112880201/analysis//spectral/fullrun_mos2_xmm0112880201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete