[Tue May 21 18:02:48 2013] Detection parameters:
  Position = (425.7, 171.7) = 11 1 7.27 -34 53 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.0 +/- 7.6
  Background counts = 7.6
  Rate = 0.001 +/- 0.0003

[Tue May 21 18:02:49 2013] Off-axis axis estimate = 13.02'
[Tue May 21 18:03:15 2013] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:15 2013] Initial guess for spatial extent in simple fitting = 12.94"
[Tue May 21 18:03:15 2013] source mask rpix=3.0, npix_max = 48, mask sum = 43, frac = 0.890
[Tue May 21 18:03:15 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 12.94"
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src28.ximg exists
[Tue May 21 18:03:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src28.csv
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue May 21 18:03:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src28.csv
[Tue May 21 18:03:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue May 21 18:03:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue May 21 18:03:16 2013] fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue May 21 18:03:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue May 21 18:03:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:36 2013] Spatial fit model total counts = 104.457000, observed total counts = 82.000000
[Tue May 21 18:03:36 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 18:03:36 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:36 2013] Assessing source extent using major
[Tue May 21 18:03:36 2013] Source does appear to be extended
[Tue May 21 18:03:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:36 2013] Deleting source due to low Poisson probability 0.9