[Tue May 21 18:02:47 2013] Detection parameters:
  Position = (297.2, 322.1) = 11 1 52.72 -34 42 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20340.0 +/- 170.5
  Background counts = 10.0
  Rate = 0.7 +/- 0.006

[Tue May 21 18:02:48 2013] Off-axis axis estimate = 1.72'
[Tue May 21 18:03:14 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:14 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Tue May 21 18:03:14 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Tue May 21 18:03:14 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue May 21 18:03:14 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 21 18:03:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src1.csv
[Tue May 21 18:03:14 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 21 18:03:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src1.csv
[Tue May 21 18:03:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 21 18:03:15 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 21 18:03:31 2013] Spatial fit model total counts = 17760.000000, observed total counts = 17760.000000
[Tue May 21 18:03:31 2013] Offset between fit and detection position for source 3 = 0.229775 pixels
[Tue May 21 18:03:31 2013] 17765.530000 total counts/ 3529.130000 bgd. counts: snr = 239.643886
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.229775 pixels
  Position = (297.0, 322.2) = 11 1 52.79 -34 42 23.9
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 14236.4 +/- 133.3
  Background counts = 3529.1
  Rate = 0.5 +/- 0.005
[Tue May 21 18:03:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:31 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:03:31 2013] Source does appear to be extended
[Tue May 21 18:03:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:49 2013] Initial guess for spatial extent in simple fitting = 5.84"
[Tue May 21 18:03:49 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.179
[Tue May 21 18:03:49 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.84"
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src1.csv
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src1.csv
[Tue May 21 18:03:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 21 18:03:50 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 21 18:04:06 2013] Spatial fit model total counts = 17760.200000, observed total counts = 17760.000000
[Tue May 21 18:04:06 2013] Offset between fit and detection position for source 3 = 0.000504 pixels
[Tue May 21 18:04:06 2013] 17765.890000 total counts/ 3538.890000 bgd. counts: snr = 239.155184
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000504 pixels
  Position = (297.0, 322.2) = 11 1 52.79 -34 42 23.9
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 14227.0 +/- 133.3
  Background counts = 3538.9
  Rate = 0.5 +/- 0.005
[Tue May 21 18:04:06 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:06 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:04:06 2013] Source does appear to be extended
[Tue May 21 18:04:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 19:31:48 2013] Counts = 14227.000000, rescaling region sizes by 3.000000
[Tue May 21 19:31:48 2013] XMMSAS src. selection expression = ellipse(25789.231790, 27986.575000, 1048.746846, 1048.746846, 0.000000, X, Y)
[Tue May 21 19:31:48 2013] Writing source region out to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src3_src.reg
[Tue May 21 19:31:48 2013] Extracting stamp from image fullrun_mos1_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (237, 262) - (357, 383)
[Tue May 21 19:31:48 2013] XMMSAS bgd. selection expression = annulus(25789.231790, 27986.575000, 5243.734228, 10487.468456, X, Y) && !ellipse(28182.319800, 18667.965000, 403.579234, 403.579234, 0.000000, X, Y) && !ellipse(16313.060020, 32351.547200, 372.465611, 372.465611, 0.000000, X, Y) && !ellipse(32400.888397, 29878.252136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33495.211823, 21963.300491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14900.342438, 27530.423004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30796.515600, 27657.519600, 308.589609, 308.589609, 0.000000, X, Y) && !ellipse(37022.585510, 29210.812286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.695900, 26111.606400, 304.871209, 304.871209, 0.000000, X, Y) && !ellipse(26195.185800, 34057.660600, 602.598417, 602.598417, 0.000000, X, Y) && !ellipse(21781.298000, 16481.692000, 1684.024048, 1684.024048, 0.000000, X, Y) && !ellipse(24774.048600, 30060.544000, 832.184024, 832.184024, 0.000000, X, Y)
[Tue May 21 19:31:48 2013] Writing fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src3.gif
[Tue May 21 19:31:54 2013] Mean detx,y = (286.27, -173.97) 
[Tue May 21 19:31:58 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 19:37:38 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 19:37:38 2013] Setting source spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 21 19:37:38 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 21 20:35:40 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:40 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 18672.00
[Tue May 21 20:35:40 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 9519.00
[Tue May 21 20:35:40 2013] Got source and background scale factors 3465600.000000, 229359447.000000
[Tue May 21 20:35:40 2013] User source parameters:
  Position = (297.0, 322.2) = 11 1 52.79 -34 42 23.9
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source aperture counts = 18528.2 +/- 137.6
  Background aperture counts = 143.8
  Rate = 0.6 +/- 0.005

[Tue May 21 20:35:46 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:46 2013] Using photon index=1.80, rate=0.494, arf fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src3.arf
[Tue May 21 20:35:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:46 2013] Updating source flux to 4.8e-12
[Tue May 21 20:35:56 2013] xmm0112880201/analysis//spectral/fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete