[Tue May 21 18:02:48 2013] Detection parameters:
  Position = (324.4, 215.1) = 11 1 43.09 -34 50 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.3 +/- 12.2
  Background counts = 7.6
  Rate = 0.005 +/- 0.0007

[Tue May 21 18:02:48 2013] Off-axis axis estimate = 6.33'
[Tue May 21 18:03:14 2013] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:14 2013] Initial guess for spatial extent in simple fitting = 9.59"
[Tue May 21 18:03:14 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.025
[Tue May 21 18:03:14 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.59"
[Tue May 21 18:03:14 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 21 18:03:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src3.csv
[Tue May 21 18:03:14 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 21 18:03:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src3.csv
[Tue May 21 18:03:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 21 18:03:15 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue May 21 18:03:31 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 13.433228 pixels away
[Tue May 21 18:03:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:31 2013] Assessing source extent using major
[Tue May 21 18:03:31 2013] Source does appear to be extended
[Tue May 21 18:03:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:49 2013] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:49 2013] Initial guess for spatial extent in simple fitting = 9.59"
[Tue May 21 18:03:49 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.025
[Tue May 21 18:03:49 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.59"
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src3.csv
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src3.csv
[Tue May 21 18:03:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 21 18:03:50 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue May 21 18:04:06 2013] Spatial fit model total counts = 167.277000, observed total counts = 168.000000
[Tue May 21 18:04:06 2013] Offset between fit and detection position for source 24 = 0.074290 pixels
[Tue May 21 18:04:06 2013] 167.750800 total counts/ 111.098000 bgd. counts: snr = 5.374874
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.074290 pixels
  Position = (324.5, 215.1) = 11 1 43.07 -34 50 9.9
  Extent = 5.0 (3.6-7.6)", rotation angle = 0
  Source counts = 56.7 +/- 13.0
  Background counts = 111.1
  Rate = 0.002 +/- 0.0004
[Tue May 21 18:04:06 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:06 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:04:06 2013] Source does appear to be extended
[Tue May 21 18:04:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 19:31:48 2013] XMMSAS src. selection expression = ellipse(28182.319800, 18667.965000, 302.684426, 302.684426, 0.000000, X, Y)
[Tue May 21 19:31:48 2013] Writing source region out to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src24_src.reg
[Tue May 21 19:31:48 2013] Extracting stamp from image fullrun_mos1_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (307, 198) - (342, 233)
[Tue May 21 19:31:48 2013] XMMSAS bgd. selection expression = annulus(28182.319800, 18667.965000, 504.474043, 1008.948086, X, Y)
[Tue May 21 19:31:48 2013] Writing fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src24.gif
[Tue May 21 19:37:59 2013] Mean detx,y = (-8494.48, -4131.87) 
[Tue May 21 19:38:00 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 19:38:09 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 19:38:09 2013] Setting source spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue May 21 19:38:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue May 21 19:59:15 2013] Not generating rmf since there are only 56 counts
[Tue May 21 19:59:15 2013] rmf not generated due to insufficient counts
[Tue May 21 20:35:41 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:41 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 75.00
[Tue May 21 20:35:41 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src24_bgd.pi.gz = 90.00
[Tue May 21 20:35:41 2013] Got source and background scale factors 289600.000000, 2383732.000000
[Tue May 21 20:35:41 2013] User source parameters:
  Position = (324.5, 215.1) = 11 1 43.07 -34 50 9.9
  Extent = 5.0 (3.6-7.6)", rotation angle = 0
  Source aperture counts = 64.1 +/- 9.7
  Background aperture counts = 10.9
  Rate = 0.002 +/- 0.0003

[Tue May 21 20:35:46 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:46 2013] Using photon index=1.80, rate=0.00197, arf fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src24.arf
[Tue May 21 20:35:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:46 2013] Updating source flux to 4.5e-14
[Tue May 21 20:35:51 2013] Source 24 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 20:35:56 2013] xmm0112880201/analysis//spectral/fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete