[Tue May 21 18:02:47 2013] Detection parameters:
  Position = (385.6, 253.0) = 11 1 21.51 -34 47 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.7 +/- 9.5
  Background counts = 7.8
  Rate = 0.003 +/- 0.0006

[Tue May 21 18:02:48 2013] Off-axis axis estimate = 7.12'
[Tue May 21 18:03:14 2013] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:14 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Tue May 21 18:03:14 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.927
[Tue May 21 18:03:14 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.99"
[Tue May 21 18:03:14 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src10.ximg exists
[Tue May 21 18:03:14 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May 21 18:03:14 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src10 appears to have run properly
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May 21 18:03:15 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue May 21 18:03:31 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.899069 pixels away
[Tue May 21 18:03:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:31 2013] Assessing source extent using major
[Tue May 21 18:03:31 2013] Source does appear to be extended
[Tue May 21 18:03:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:49 2013] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:49 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Tue May 21 18:03:49 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.927
[Tue May 21 18:03:49 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.99"
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src10.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src10.csv
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src10.csv
[Tue May 21 18:03:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May 21 18:03:50 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue May 21 18:04:06 2013] Source 23 is offset by -8.395864 and -3.757328 pixels which is larger than
2 X fitted extent = 1.149346 x 1.149346, not incorporating fit results
[Tue May 21 18:04:06 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:06 2013] Assessing source extent using major
[Tue May 21 18:04:06 2013] Source does appear to be extended
[Tue May 21 18:04:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 19:31:49 2013] XMMSAS src. selection expression = ellipse(33495.211823, 21963.300491, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 19:31:49 2013] Writing source region out to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src23_src.reg
[Tue May 21 19:31:49 2013] Extracting stamp from image fullrun_mos1_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (348, 216) - (423, 291)
[Tue May 21 19:31:49 2013] XMMSAS bgd. selection expression = annulus(33495.211823, 21963.300491, 1087.500000, 2175.000000, X, Y)
[Tue May 21 19:31:49 2013] Writing fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src23.gif
[Tue May 21 19:39:47 2013] Mean detx,y = (-9234.44, 2116.09) 
[Tue May 21 19:39:48 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 19:39:58 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 19:39:58 2013] Setting source spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue May 21 19:39:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue May 21 20:03:17 2013] Not generating rmf since there are only 50 counts
[Tue May 21 20:03:17 2013] rmf not generated due to insufficient counts
[Tue May 21 20:35:42 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:42 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 96.00
[Tue May 21 20:35:43 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src23_bgd.pi.gz = 453.00
[Tue May 21 20:35:43 2013] Got source and background scale factors 1263844.000000, 10692900.000000
[Tue May 21 20:35:43 2013] User source parameters:
  Position = (385.6, 253.0) = 11 1 21.51 -34 47 25.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 42.5 +/- 10.8
  Background aperture counts = 53.5
  Rate = 0.001 +/- 0.0004

[Tue May 21 20:35:43 2013] Updating counts from extracted products
[Tue May 21 20:35:43 2013] Set source signif. to 42.46/7.32 = 5.80
[Tue May 21 20:35:46 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:46 2013] Using photon index=1.80, rate=0.00147, arf fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src23.arf
[Tue May 21 20:35:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:46 2013] Updating source flux to 2.5e-14
[Tue May 21 20:35:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 20:35:56 2013] xmm0112880201/analysis//spectral/fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete