[Tue May 21 18:02:47 2013] Detection parameters:
  Position = (454.2, 278.2) = 11 0 57.29 -34 45 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.7 +/- 10.9
  Background counts = 6.7
  Rate = 0.002 +/- 0.0004

[Tue May 21 18:02:48 2013] Off-axis axis estimate = 11.39'
[Tue May 21 18:03:14 2013] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:14 2013] Initial guess for spatial extent in simple fitting = 12.12"
[Tue May 21 18:03:14 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.134
[Tue May 21 18:03:14 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 12.12"
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src13.ximg exists
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue May 21 18:03:15 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src13 appears to have run properly
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue May 21 18:03:15 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue May 21 18:03:31 2013] Spatial fit model total counts = 135.536000, observed total counts = 136.000000
[Tue May 21 18:03:31 2013] Offset between fit and detection position for source 20 = 0.308719 pixels
[Tue May 21 18:03:31 2013] 134.511100 total counts/ 100.032000 bgd. counts: snr = 3.447358
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.308719 pixels
  Position = (454.2, 278.5) = 11 0 57.29 -34 45 33.2
  Extent = 4.9 (3.1-7.9)", rotation angle = 0
  Source counts = 34.5 +/- 11.6
  Background counts = 100.0
  Rate = 0.001 +/- 0.0004
[Tue May 21 18:03:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:31 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:03:31 2013] Source does appear to be extended
[Tue May 21 18:03:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:49 2013] Initial guess for spatial extent in simple fitting = 4.89"
[Tue May 21 18:03:49 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.854
[Tue May 21 18:03:49 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 4.89"
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src13.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src13.csv
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src13.csv
[Tue May 21 18:03:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue May 21 18:03:50 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue May 21 18:04:06 2013] Spatial fit model total counts = 129.453000, observed total counts = 130.000000
[Tue May 21 18:04:06 2013] Offset between fit and detection position for source 20 = 0.041650 pixels
[Tue May 21 18:04:06 2013] 127.048500 total counts/ 93.152300 bgd. counts: snr = 3.511998
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.041650 pixels
  Position = (454.2, 278.6) = 11 0 57.28 -34 45 33.1
  Extent = 4.9 (3.0-7.5)", rotation angle = 0
  Source counts = 33.9 +/- 11.3
  Background counts = 93.2
  Rate = 0.001 +/- 0.0004
[Tue May 21 18:04:06 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:06 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:04:06 2013] Source does appear to be extended
[Tue May 21 18:04:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 19:31:49 2013] XMMSAS src. selection expression = ellipse(39470.314000, 24188.580200, 295.040408, 295.040408, 0.000000, X, Y)
[Tue May 21 19:31:49 2013] Writing source region out to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src20_src.reg
[Tue May 21 19:31:49 2013] Extracting stamp from image fullrun_mos1_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (437, 262) - (471, 296)
[Tue May 21 19:31:49 2013] XMMSAS bgd. selection expression = annulus(39470.314000, 24188.580200, 491.734014, 983.468028, X, Y) && !ellipse(37714.597656, 23155.537415, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 19:31:49 2013] Writing fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src20.gif
[Tue May 21 19:40:48 2013] Mean detx,y = (-11234.94, 8131.18) 
[Tue May 21 19:40:49 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 19:40:58 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 19:40:58 2013] Setting source spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue May 21 19:40:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue May 21 20:03:45 2013] Not generating rmf since there are only 33 counts
[Tue May 21 20:03:45 2013] rmf not generated due to insufficient counts
[Tue May 21 20:35:43 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:43 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 49.00
[Tue May 21 20:35:43 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src20_bgd.pi.gz = 100.00
[Tue May 21 20:35:43 2013] Got source and background scale factors 230564.000000, 2079880.000000
[Tue May 21 20:35:43 2013] User source parameters:
  Position = (454.2, 278.6) = 11 0 57.28 -34 45 33.1
  Extent = 4.9 (3.0-7.5)", rotation angle = 0
  Source aperture counts = 37.9 +/- 8.1
  Background aperture counts = 11.1
  Rate = 0.001 +/- 0.0003

[Tue May 21 20:35:46 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:46 2013] Using photon index=1.80, rate=0.00118, arf fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src20.arf
[Tue May 21 20:35:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:46 2013] Updating source flux to 3.9e-14
[Tue May 21 20:35:51 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 20:35:56 2013] xmm0112880201/analysis//spectral/fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete